Instant compatibility check with FPS benchmarks and optimization tips
Fivem
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 30 | 39 | 48 | 61 |
| 1440p QHD | 54 | 70 | 87 | 110 |
| 1080p Full HD | 82 | 106 | 132 | 168 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Fivem on Your System
Best Settings per Resolution
At 3840x2160, the only preset that maintains at least 60 FPS is Low, with an average of 61 FPS. Medium drops to 48 FPS, High to 39 FPS, and Ultra falls to 30 FPS. The data indicates that 4K gaming is possible only at the lowest quality tier, and even then the margin above the 60 FPS threshold is a single frame.
At 2560x1440, High settings deliver 70 FPS average, making it the most demanding preset that clears the playability threshold. Medium runs at 87 FPS, Low at 110 FPS, and Ultra drops below 60 FPS at 54 FPS. The recorded numbers show a clear ceiling: Ultra is not viable at this resolution, but High remains comfortably playable with room for minor frame drops.
At 1920x1080, Ultra settings hold an average of 82 FPS, which is the best quality tier that stays above 60 FPS. High runs at 106 FPS, Medium at 132 FPS, and Low at 168 FPS. Every preset at 1080p clears the 60 FPS threshold, so users can select the highest visual fidelity without sacrificing smoothness.
CPU and GPU Roles
The scaling between presets and resolutions reveals how the workload shifts between the AMD Ryzen 5 4600G and the NVIDIA GeForce RTX 5050. At 1920x1080, the gap between Low and Ultra is 86 FPS (168 FPS down to 82 FPS), which indicates that the GPU is the primary limiter as graphical complexity increases. The CPU has enough headroom at this resolution to feed the GPU across all settings.
Moving to 2560x1440, the spread between Low and Ultra narrows to 56 FPS (110 FPS down to 54 FPS). The RTX 5050 begins to saturate, but the Ryzen 5 4600G still keeps pace. The average FPS at Medium (87) is close to the 1080p High result (106), suggesting that resolution scaling costs roughly 20 percent performance between these two points.
At 3840x2160, the workload becomes heavily GPU-bound. Low yields 61 FPS, Medium 48 FPS, and Ultra 30 FPS. The delta between Low and Ultra is 31 FPS, which is proportionally smaller than at lower resolutions. This compression indicates that the RTX 5050's 8 GB memory buffer and 128-bit bus are the limiting factors, not the CPU. The Ryzen 5 4600G's 6 cores and 12 threads provide sufficient compute for the game's logic at 4K, but the GPU cannot translate that into higher frame rates.
A notable pattern: at every resolution, the jump from Low to Medium costs roughly 13 to 20 FPS, while the jump from High to Ultra costs 24 to 36 FPS. The diminishing returns at Ultra settings are consistent with the GPU hitting its memory bandwidth ceiling. The CPU's role becomes more prominent only at 1080p Low, where 168 FPS approaches the practical limit for this processor's single-thread performance in the game engine.
How This Combo Ranks
The database places this combination at rank 2275 out of 3707 tested combos for Fivem. That puts it in the 61st percentile of all systems tested, meaning roughly 39 percent of recorded configurations deliver better performance. The rank reflects a mid-pack position: not a top-tier system, but far from the bottom.
The RTX 5050's individual percentile against all GPUs is 66, while the Ryzen 5 4600G sits at the 71st percentile against all CPUs. The combo rank being lower than either component's individual percentile suggests that the pairing introduces some bottleneck, likely the CPU at lower resolutions and the GPU at higher resolutions. The system is balanced enough to avoid severe stalls, but it does not extract the full potential from either part.
In the context of Fivem specifically, this rank means the system can handle the game at standard monitor resolutions with high settings, but it will struggle at 4K Ultra. The data shows that the combo is better suited to 1080p and 1440p gaming, where it ranks comfortably within playable territory across most presets.
Similar Performance Alternatives
Looking at the CPU's nearest rivals in the database, the AMD Ryzen 3 PRO 5355GE has an average benchmark score of 17482, just 0.1 percent below the Ryzen 5 4600G's 17507. A system using that chip would behave nearly identically in Fivem, with the same 6-core, 12-thread layout and similar clock behavior. The AMD Ryzen 3 8300GE scores 17614, 0.6 percent higher, which would translate to a negligible frame rate difference in this game. The Intel Core 7 150U (17395, 0.6 percent lower) and Intel Core i3-14100T (17648, 0.8 percent higher) also fall within a narrow band. Any of these CPUs paired with the RTX 5050 would produce results within a few FPS of the measured values.
On the GPU side, the nearest rivals are more varied. The AMD Radeon RX Vega M GL scores 21153, 0.6 percent higher than the RTX 5050's 21035. The AMD Radeon HD 8970M scores 21237, 1.0 percent higher, while the AMD Radeon RX 5600 XT scores 20713, 1.6 percent lower. The NVIDIA RTX A4000 Mobile scores 21379, 1.6 percent higher. These deltas are all within 2 percent, meaning any of these GPUs paired with the Ryzen 5 4600G would deliver essentially the same Fivem experience. The RX 5600 XT would be marginally slower, while the RTX A4000 Mobile would be marginally faster, but none would cross a meaningful playability boundary.
Measured FPS Breakdown
At 1920x1080, the full set of measurements shows Low at 168 FPS average, Medium at 132 FPS with a range of 112 to 152 FPS, High at 106 FPS, and Ultra at 82 FPS. The min/max data for Medium indicates that frame pacing remains consistent, with no dramatic dips below the average. The absence of min/max values for the other presets suggests the database recorded only averages for those configurations.
At 2560x1440, Low averages 110 FPS, Medium averages 87 FPS with a range of 74 to 100 FPS, High averages 70 FPS, and Ultra averages 54 FPS. The Medium range shows a 26 FPS spread, which is wider than at 1080p, indicating that the GPU is starting to feel the resolution pressure. The Ultra result at 54 FPS sits just below the playability threshold, so users would notice occasional stutter in dense scenes.
At 3840x2160, Low averages 61 FPS, Medium averages 48 FPS with a range of 41 to 56 FPS, High averages 39 FPS, and Ultra averages 30 FPS. The Medium range here is 15 FPS, narrower than at lower resolutions, which is typical for GPU-bound scenarios where the frame rate is capped by consistent memory throughput. The Low result at 61 FPS is the only playable option at this resolution, and it leaves no headroom for demanding multiplayer moments.
The Verdict
This system can run Fivem, but the playable range depends heavily on the chosen resolution and preset. At 1920x1080, every preset from Low to Ultra clears 60 FPS, with Ultra delivering 82 FPS average. This is the sweet spot for this combo: full visual quality with a comfortable margin above the threshold.
At 2560x1440, the system handles Low, Medium, and High presets, with High at 70 FPS being the best visual option that stays playable. Ultra drops to 54 FPS, which fails the 60 FPS requirement. Users who prioritize resolution over quality should select High at 1440p.
At 3840x2160, only Low settings reach 61 FPS. Medium at 48 FPS, High at 39 FPS, and Ultra at 30 FPS all fall short. The verdict is clear: 4K gaming requires sacrificing almost all graphical detail to maintain smooth frame rates. For most users, 1080p Ultra or 1440p High will be the optimal balance of visual fidelity and performance.
The data suggests this combo is a solid 1080p machine and a capable 1440p machine, but it is not suited for 4K gaming beyond minimal settings. The 8 GB VRAM on the RTX 5050 and the Ryzen 5 4600G's mid-range compute power combine to create a system that excels at standard resolution gaming without the overhead for high-resolution textures and effects.
FAQ
Q: Can this PC run Fivem at 60 FPS on a 1080p monitor?
A: Yes. At 1920x1080, all four presets (Low 168 FPS, Medium 132 FPS, High 106 FPS, Ultra 82 FPS) exceed the 60 FPS threshold, so even the most demanding Ultra settings remain playable.
Q: What is the best settings preset at 1440p for this system?
A: High is the most demanding preset that stays at or above 60 FPS at 2560x1440, with an average of 70 FPS. Ultra falls to 54 FPS and does not meet the playability threshold.
Q: Is 4K gaming possible with the RTX 5050 and Ryzen 5 4600G?
A: Only at Low settings, which average 61 FPS at 3840x2160. Medium (48 FPS), High (39 FPS), and Ultra (30 FPS) all fall below 60 FPS.
Q: How does this combo compare to other systems in the database?
A: It ranks 2275 out of 3707 tested combinations for Fivem, placing it in the upper-middle range. The CPU sits at the 71st percentile and the GPU at the 66th percentile among their respective categories.
Q: What CPU would perform similarly to the Ryzen 5 4600G in this setup?
A: The AMD Ryzen 3 PRO 5355GE (0.1 percent lower average score), AMD Ryzen 3 8300GE (0.6 percent higher), Intel Core 7 150U (0.6 percent lower), and Intel Core i3-14100T (0.8 percent higher) all fall within a narrow performance band and would produce nearly identical Fivem frame rates.
Q: Does the GPU or CPU limit performance more in this game?
A: At 1080p and 1440p, the GPU becomes the primary limiter as settings increase, with the gap between Low and Ultra growing from 86 FPS at 1080p to 56 FPS at 1440p. At 4K, the GPU is heavily bound, compressing the difference between presets to just 31 FPS and indicating that the RTX 5050's memory bandwidth is the bottleneck.