Instant compatibility check with FPS benchmarks and optimization tips
Fivem
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 38 | 49 | 62 | 78 |
| 1440p QHD | 69 | 89 | 111 | 141 |
| 1080p Full HD | 105 | 135 | 169 | 214 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Fivem on Your System
Measured FPS Breakdown
The recorded data for this combination of AMD Ryzen 5 4600G and NVIDIA GeForce RTX 3070 in Fivem shows a clear pattern of performance scaling across three resolutions and four presets. All measurements represent the average FPS unless otherwise noted, with min and max values available for the Medium preset at each resolution.
At 1920x1080, the combination delivers its strongest results. The Low preset reaches an average of 214 FPS, providing significant headroom above any gameplay threshold. Medium produces an average of 169 FPS, with a recorded minimum of 144 FPS and maximum of 194 FPS, indicating consistent frame delivery. High drops to 135 FPS average, while Ultra still holds an average of 105 FPS. Every preset at this resolution clears the 60 FPS playability threshold by a substantial margin, with even the most demanding setting nearly doubling that baseline.
Moving to 2560x1440, the performance remains strong but shows the expected cost of additional pixels. Low averages 141 FPS, Medium averages 111 FPS with a min of 94 FPS and max of 128 FPS, High averages 89 FPS, and Ultra averages 69 FPS. The Ultra preset at this resolution remains above the 60 FPS threshold, though with less headroom than at 1080p. The minimum recorded value at Medium, 94 FPS, suggests that even frame drops in the recorded data stay well above playable levels.
At 3840x2160, the load becomes more demanding and the results split into two categories. Low averages 78 FPS, Medium averages 62 FPS with a min of 52 FPS and max of 71 FPS, High averages 49 FPS, and Ultra averages 38 FPS. Only Low and Medium clear the 60 FPS average threshold at this resolution. The Medium preset's minimum of 52 FPS indicates that occasional dips below 60 FPS can occur, though the average remains playable. High and Ultra fall below the threshold on average, making them unsuitable for smooth gameplay at 4K.
CPU and GPU Roles
The scaling between resolutions reveals which component carries the load at each setting level. Comparing the Low preset across resolutions: 214 FPS at 1080p, 141 FPS at 1440p, and 78 FPS at 4K. This represents a 34% drop moving from 1080p to 1440p and a 45% further drop moving from 1440p to 4K. Such steep declines when pixel count increases indicate that the GPU becomes the limiting factor as resolution rises. At Low settings, the CPU has less work to do per frame, so the RTX 3070's rendering throughput governs performance.
The Ultra preset shows a different pattern: 105 FPS at 1080p, 69 FPS at 1440p, and 38 FPS at 4K. The percentage drops are similar in magnitude, but the absolute values are lower across the board. This suggests that at higher settings, both components contribute more per frame, yet the GPU still dominates the scaling behavior. The Ryzen 5 4600G, with its 6 cores and 12 threads based on Zen 2 architecture, provides enough processing power that it does not become the primary constraint at any resolution tested in the database.
The Medium preset offers the most detailed data due to min and max values. At 1080p, the spread from min 144 to max 194 FPS spans 50 FPS. At 1440p, the spread narrows to 34 FPS (94 to 128). At 4K, the spread tightens further to 19 FPS (52 to 71). This narrowing spread at higher resolutions indicates that GPU-bound scenarios produce more consistent frame pacing, while CPU-bound or balanced scenarios at lower resolutions allow wider variation. The minimum FPS at 4K Medium, 52 FPS, falls below the 60 FPS threshold even though the average is 62 FPS, showing that transient dips can occur under heavy load.
FAQ
Q: Can this system run Fivem at 1080p with maximum settings?
A: Yes. The Ultra preset at 1920x1080 averages 105 FPS, which is well above the 60 FPS playability threshold. This is the best performing preset at this resolution in terms of visual quality while maintaining playable frame rates.
Q: What is the highest quality preset that maintains 60 FPS at 1440p?
A: The Ultra preset at 2560x1440 averages 69 FPS, making it the most demanding setting that stays above the threshold. This provides a comfortable margin above 60 FPS for most gameplay scenarios.
Q: Is 4K gaming viable with this hardware?
A: At 3840x2160, only the Low and Medium presets achieve average frame rates above 60 FPS, at 78 FPS and 62 FPS respectively. The High preset falls to 49 FPS average, and Ultra drops to 38 FPS. Medium is the best visually demanding option that maintains a playable average, though its minimum of 52 FPS shows some dips below 60 FPS.
Q: How does the Medium preset's frame consistency compare across resolutions?
A: The recorded min and max values show tighter frame delivery at higher resolutions. At 1080p, Medium ranges from 144 to 194 FPS (50 FPS spread). At 1440p, it ranges from 94 to 128 FPS (34 FPS spread). At 4K, it ranges from 52 to 71 FPS (19 FPS spread). Higher resolutions produce more consistent frame times, likely due to the GPU becoming the dominant bottleneck.
Q: Which component limits performance at 4K Ultra settings?
A: The steep decline from 105 FPS at 1080p Ultra to 38 FPS at 4K Ultra, combined with the CPU's benchmark position at the 71st percentile among all processors, indicates that the RTX 3070's rendering capacity is the primary constraint at 4K. The CPU provides sufficient throughput for the game's logic at this resolution, but the GPU cannot sustain high frame rates under the combined load of 4K resolution and Ultra settings.
Q: Does the system meet the 60 FPS target at any resolution with High settings?
A: Yes, at 1080p and 1440p. High at 1920x1080 averages 135 FPS, and High at 2560x1440 averages 89 FPS. However, at 3840x2160, High averages only 49 FPS, falling below the threshold.
How This Combo Ranks
The database places this combination at rank 1575 out of 3707 tested combos for Fivem. This positions the system in the 42nd percentile of all tested configurations, meaning roughly 58% of tested combos perform better in this specific game. Given that the RTX 3070 sits at the 61st percentile among all GPUs and the Ryzen 5 4600G sits at the 71st percentile among all CPUs, the combined ranking reflects a system that is above average in both components but not at the top tier for this particular title.
The ranking context matters when interpreting the FPS data. The system delivers 105 FPS at 1080p Ultra and 69 FPS at 1440p Ultra, which are strong results for a mid-range pairing. The CPU's 71st percentile ranking suggests it handles the game's CPU-bound aspects competently, while the GPU's 61st percentile ranking provides adequate rasterization performance. The gap between the two percentiles indicates that the GPU is slightly more of a limiting factor than the CPU in this combination, which aligns with the resolution scaling patterns observed in the measured FPS data.
Similar Performance Alternatives
The nearest rivals for the CPU, based on average benchmark scores, offer insight into what other processors would behave similarly in this system. The AMD Ryzen 3 PRO 5355GE scores 17482, nearly identical to the Ryzen 5 4600G's 17507, with a delta of just 0.1%. The Intel Core 7 150U scores 17395, a 0.6% difference, while the AMD Ryzen 3 8300GE scores 17614, a 0.6% difference in the other direction. The Intel Core i3-14100T scores 17648, representing a 0.8% gap. All four rivals fall within 1% of the 4600G's average score, meaning any of these processors would produce nearly indistinguishable frame rates in Fivem when paired with the same GPU.
On the GPU side, the nearest rivals show similar tight clustering. The AMD Radeon RX 7600 XT scores 17083, a 0.7% difference from the RTX 3070's 17208. The NVIDIA GeForce GTX 690 scores 17037, a 1% difference. The AMD Radeon HD 7970M scores 17019, a 1.1% difference. The NVIDIA Tesla K40c scores 17468, a 1.5% difference in the opposite direction. These deltas indicate that swapping the RTX 3070 for any of these alternatives would change Fivem performance by roughly 1% or less, which is within the margin of measurement variance. In practical terms, a user with any of these GPU alternatives paired with the Ryzen 5 4600G would see essentially the same FPS figures as those recorded here.
The Verdict
This system can run Fivem across all tested resolutions, but the playable settings vary by resolution. At 1920x1080, all four presets clear the 60 FPS threshold, with the lowest average being 105 FPS at Ultra. This makes 1080p gaming fully viable at maximum settings with significant headroom. At 2560x1440, all four presets also clear 60 FPS, though Ultra's 69 FPS average offers less margin than at 1080p. The system handles 1440p gaming well across the quality spectrum.
At 3840x2160, the verdict becomes conditional. The Low preset averages 78 FPS and Medium averages 62 FPS, both clearing the threshold. The High preset falls short at 49 FPS average, and Ultra drops to 38 FPS. The database's verdict confirms this pattern: at 4K, the playable settings are Low and Medium, with Medium being the best choice for visual quality while maintaining a playable average. However, the Medium minimum of 52 FPS means players may experience occasional dips below 60 FPS during demanding moments.
For users targeting a consistent 60 FPS experience, the data supports 1080p Ultra and 1440p Ultra as the most visually demanding settings that still deliver comfortable averages. At 4K, Medium represents the best balance, accepting that brief dips below 60 FPS may occur based on the recorded minimum.
Best Settings per Resolution
At 1920x1080, the most demanding preset that stays at or above 60 FPS average is Ultra, delivering 105 FPS average. This provides both maximum visual quality and a comfortable margin above the playability threshold.
At 2560x1440, the most demanding preset that maintains 60 FPS average is Ultra, with 69 FPS average. This allows full visual quality at 1440p with enough headroom to absorb most frame time spikes.
At 3840x2160, the most demanding preset that stays at or above 60 FPS average is Medium, with 62 FPS average. This is the recommended ceiling for 4K gaming with this hardware, though the recorded minimum of 52 FPS indicates that some scenes will drop below the threshold. The Low preset at 78 FPS average provides a more comfortable buffer for players prioritizing smoothness over visual fidelity at 4K.