Instant compatibility check with FPS benchmarks and optimization tips
Fivem
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 72 | 93 | 116 | 147 |
| 1440p QHD | 130 | 166 | 180 | 196 |
| 1080p Full HD | 174 | 191 | 207 | 225 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Fivem on Your System
Similar Performance Alternatives
The AMD Ryzen 5 3600 sits at the 71st percentile among all tested CPUs, with an average benchmark score of 17035. Its closest competitors in the database are remarkably tight groupings. The Intel Core i7-1260P scores 17007, a mere 0.2% behind, while the Intel Core i5-11400 reaches 17067, just 0.2% ahead. The AMD EPYC 7573X also lands at 17070, 0.2% above the Ryzen 5 3600, and the AMD EPYC 7742 trails at 16998, 0.2% lower. These four rivals form a cluster where no single part separates itself by more than a fraction of a percent, meaning users moving between any of these CPUs should observe nearly identical frame pacing in Fivem. The Ryzen 5 3600 itself provides 6 cores and 12 threads from the Zen 2 architecture, with a base clock of 3.60 GHz and a boost clock of 4.20 GHz, paired with 32 MB of shared L3 cache. Its multi-threaded performance in Cinebench R23 reaches 15045, while single-core performance hits 2124, figures that align with the rival cluster above.
For the GPU side, the NVIDIA GeForce RTX 5090 D posts an average benchmark score of 77712, placing it in the 92nd percentile of all tested graphics cards. Its nearest rivals in the database are somewhat unexpected. The AMD Radeon RX 6650M XT scores 76904, which is 1.1% lower. The AMD Radeon RX 6850M XT reaches 78940, 1.6% higher. The NVIDIA Tesla P100 PCIe 12 GB achieves 79396, 2.1% higher, and the NVIDIA Tesla P100 PCIe 16 GB scores 79605, 2.4% higher. These deltas are small enough that in Fivem, all four alternatives would deliver broadly similar frame rates, though the two Tesla cards and the RX 6850M XT would edge ahead slightly in raw throughput. The RTX 5090 D carries 21760 shading units, 680 texture mapping units, and 176 raster operation pipelines, with 32 GB of GDDR7 memory on a 512-bit bus delivering 1.79 TB/s of bandwidth. Its boost clock sits at 2407 MHz. The practical takeaway from the data: anyone considering the RTX 5090 D for Fivem could substitute any of these four close rivals and maintain a comparable experience, whereas the CPU alternatives are so tightly matched that swapping between them would be imperceptible in this title.
CPU and GPU Roles
Fivem's frame rate scaling across resolutions and presets reveals which component dominates the workload. At 1920x1080 with Low settings, the combo produces 225 FPS. Moving to Medium drops the average to 207 FPS, High yields 191 FPS, and Ultra still holds 174 FPS. The spread from Low to Ultra at 1080p is 51 FPS, a 22.7% reduction. At 2560x1440, the same preset progression goes from 196 FPS on Low to 180 FPS on Medium, 166 FPS on High, and 130 FPS on Ultra, a spread of 66 FPS or 33.7%. At 3840x2160, Low delivers 147 FPS, Medium drops to 116 FPS, High falls to 93 FPS, and Ultra bottoms out at 72 FPS, a spread of 75 FPS or 51.0%. The widening gap between Low and Ultra as resolution increases points directly to the GPU carrying more of the load at higher pixel counts.
However, the resolution scaling tells a more nuanced story. From 1080p Low at 225 FPS to 1440p Low at 196 FPS, the drop is 12.9%. From 1440p Low to 4K Low, the drop is 25.0%. For Ultra settings, 1080p runs at 174 FPS, 1440p at 130 FPS, and 4K at 72 FPS, drops of 25.3% and 44.6% respectively. These substantial reductions as resolution climbs indicate that the GPU is the primary bottleneck at higher resolutions and higher presets. The RTX 5090 D, despite its massive 104.8 TFLOPS FP32 throughput, still cannot maintain anywhere near its 1080p frame rates when pushed to 4K Ultra. Meanwhile, the CPU's role is more evident at lower resolutions and lower presets. At 1080p Low, the system reaches 225 FPS, and the gap between Low and Medium at 1080p is only 18 FPS, whereas the same preset gap at 4K is 31 FPS. This suggests that at 1080p, the Ryzen 5 3600's single-thread performance, measured at 2124 in Cinebench R23, becomes more relevant as the GPU has spare capacity. The 12-thread count and 4.20 GHz boost clock keep the CPU from becoming a limiting factor at lower settings, but the GPU scaling dominates at 4K.
The data indicates that for Fivem, the RTX 5090 D is the decisive component at 4K, where Ultra settings drop to 72 FPS, while the Ryzen 5 3600 is sufficient to feed the GPU at 1080p and 1440p without dragging frame rates down. The 3DMark multi-threaded score of 4605 for the CPU and the PassMark G3D score of 44065 for the GPU both reinforce this division of labor.
Best Settings per Resolution
At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, which delivers an average of 174 FPS. There is no preset in the database that falls below the playable threshold at this resolution, so users can select Ultra without concern. The measured FPS range on Medium at 1080p spans 176 to 238 FPS, indicating headroom even at that middle setting.
At 2560x1440, Ultra again is the best choice, averaging 130 FPS. The Medium preset at this resolution shows a minimum of 153 FPS and a maximum of 207 FPS, so all four tested presets remain comfortably above 60 FPS. The gap from High at 166 FPS to Ultra at 130 FPS is 36 FPS, yet both are far beyond the playable threshold.
At 3840x2160, Ultra remains the most demanding preset that clears 60 FPS, averaging 72 FPS. This is the tightest margin in the entire dataset: Ultra at 4K is only 12 FPS above the 60 FPS threshold. High at 4K reaches 93 FPS, Medium hits 116 FPS, and Low runs at 147 FPS. The Medium preset at 4K shows a minimum of 99 FPS and a maximum of 133 FPS, but since Ultra holds 72 FPS on average, the recommendation stands as Ultra for maximum visual quality while staying playable. The recorded data shows no preset at any resolution dipping below 60 FPS on average, so the limiting factor is purely visual preference rather than playability.
The Verdict
This PC can run Fivem at every resolution and preset combination recorded in the database. The verdict by resolution is unambiguous. At 3840x2160, all four settings are playable: High at 93 FPS, Low at 147 FPS, Medium at 116 FPS, and Ultra at 72 FPS. The best settings at 4K are Ultra, with an average of 72 FPS, which clears the 60 FPS threshold by 12 FPS. At 2560x1440, every preset also clears 60 FPS, with Ultra averaging 130 FPS, High at 166 FPS, Medium at 180 FPS, and Low at 196 FPS. At 1920x1080, Ultra reaches 174 FPS, High hits 191 FPS, Medium reaches 207 FPS, and Low tops out at 225 FPS. No preset at any resolution falls below the playable threshold.
The practical verdict: users can enable Ultra settings at all three tested resolutions. The only scenario with any caution is 4K Ultra, where 72 FPS leaves a 12 FPS buffer above the threshold, but it still qualifies as fully playable. The Ryzen 5 3600 and RTX 5090 D combination demonstrates that the GPU's 92nd percentile standing and the CPU's 71st percentile standing are both sufficient for this multiplayer title. The bottleneck analysis shows that even at 4K, the system maintains playability at the highest preset, which is a strong result given that 4K Ultra represents the most demanding configuration in the dataset.
FAQ
Q: What is the best settings preset for Fivem at 1920x1080 with this hardware?
A: Ultra settings deliver an average of 174 FPS at 1920x1080, which is the most demanding preset tested and remains far above the 60 FPS playable threshold.
Q: Can this system handle 4K Ultra in Fivem?
A: Yes. At 3840x2160 with Ultra settings, the average frame rate is 72 FPS, clearing the 60 FPS threshold by 12 FPS.
Q: How much performance drops from 1080p to 4K on Ultra settings?
A: At 1080p Ultra the average is 174 FPS, at 1440p Ultra it drops to 130 FPS, and at 4K Ultra it falls to 72 FPS. The drop from 1080p to 4K is 102 FPS.
Q: Which component matters more for Fivem at 4K?
A: The GPU dominates at 4K. The frame rate falls from 147 FPS on Low to 72 FPS on Ultra at 4K, a 75 FPS spread that reflects GPU workload scaling with resolution and preset.
Q: How does the Ryzen 5 3600 compare to its nearest CPU rivals?
A: The Ryzen 5 3600 scores 17035 on average, which is 0.2% higher than the Intel Core i7-1260P and 0.2% lower than both the Intel Core i5-11400 and AMD EPYC 7573X. The AMD EPYC 7742 trails by 0.2%.
Q: Is there any preset in the database that falls below 60 FPS?
A: No. Every resolution and preset combination recorded, from 1080p Low at 225 FPS to 4K Ultra at 72 FPS, stays at or above the 60 FPS playable threshold.
How This Combo Ranks
In the database's overall rankings for Fivem, this combination of the AMD Ryzen 5 3600 and NVIDIA GeForce RTX 5090 D ranks 332nd out of 3707 tested combos. That places it in the top 9.0% of all configurations recorded for this game. The rank reflects the balance between the CPU's 71st percentile standing and the GPU's 92nd percentile standing, with the GPU contributing the larger share of the combo's competitive position. The RTX 5090 D's average benchmark score of 77712 against the Ryzen 5 3600's 17035 shows a 4.56 to 1 ratio in favor of the GPU, which aligns with the observed frame rate scaling that leans heavily on graphics throughput at higher resolutions. Given that 3707 combos have been tested, a rank of 332 means the vast majority of systems in the database trail this pairing in Fivem. The only configurations that would rank higher are those pairing even stronger CPUs with this GPU or comparable GPUs with faster processors, but the data shows that this combo already clears the playability bar at every setting and resolution tested. The 4K Ultra result of 72 FPS, in particular, demonstrates that this pairing belongs in the upper tier of Fivem-capable systems, as many combinations in the database would struggle to maintain 60 FPS at that preset. The rank, combined with the consistent 60+ FPS results across all twelve recorded data points, supports a confident recommendation for this hardware pairing in Fivem.