Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Fivem
Multiplayer 2017

Fivem

79%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
197 FPS
Ultra 1080p Measured
152 FPS

1440p (2K / QHD)

Low 1440p Measured
171 FPS
Ultra 1440p Measured
130 FPS

4K (Ultra HD)

Low 4K Measured
141 FPS
Ultra 4K Measured
72 FPS
6ms Frame Time
9ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,479
Your CPU 21,484
Graphics Card
Required 27,716
Your GPU 77,712

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 72 93 116 141
1440p QHD 130 145 157 171
1080p Full HD 152 167 181 197

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 167
1920x1080 Low 197
1920x1080 Medium 181
1920x1080 Ultra 152
2560x1440 High 145
2560x1440 Low 171
2560x1440 Medium 157
2560x1440 Ultra 130
3840x2160 High 93
3840x2160 Low 141
3840x2160 Medium 116
3840x2160 Ultra 72

Performance Analysis: Fivem on Your System

Measured FPS Breakdown

The recorded data for FiveM with the AMD Ryzen 5 2600 and NVIDIA GeForce RTX 5090 D shows a system that comfortably exceeds the 60 FPS playability threshold at every resolution and preset combination tested. The measurements span three resolutions and four settings levels, with the database capturing average FPS for all configurations and minimum/maximum FPS for the Medium preset at each resolution.

At 1920x1080, the lowest average FPS recorded is 152 on Ultra settings, while Low settings produce 197 FPS. The Medium preset shows an average of 181 FPS with a minimum of 154 FPS and a maximum of 208 FPS. High settings land at 167 FPS. The gap between Low and Ultra at this resolution is 45 FPS, indicating that visual quality scaling has a measurable but not dramatic impact on performance.

Moving to 2560x1440, the averages shift downward but remain high. Ultra settings deliver 130 FPS, High settings produce 145 FPS, Medium shows 157 FPS with a minimum of 134 FPS and maximum of 181 FPS, and Low settings reach 171 FPS. The spread between Low and Ultra here is 41 FPS, slightly narrower than at 1080p. The Medium preset's minimum of 134 FPS confirms that even the lowest recorded frame rates stay well above the playability threshold.

At 3840x2160, the performance picture changes more noticeably. Ultra settings drop to 72 FPS, which is still above the 60 FPS threshold but with less headroom. High settings deliver 93 FPS, Medium produces 116 FPS with a minimum of 99 FPS and maximum of 133 FPS, and Low settings reach 141 FPS. The delta between Low and Ultra at 4K is 69 FPS, the largest spread across all resolutions. The Medium preset's minimum of 99 FPS shows that even the worst-case recorded frames at 4K remain far above playable levels.

The data indicates that the system scales predictably with resolution. Comparing the same settings across resolutions, Ultra at 1080p delivers 152 FPS, at 1440p it delivers 130 FPS, and at 2160p it delivers 72 FPS. That represents a 53% drop from 1080p to 4K on Ultra settings. Low settings show a smaller relative decline: 197 FPS at 1080p, 171 FPS at 1440p, and 141 FPS at 4K, a 28% reduction. This pattern suggests that higher settings amplify the cost of increased resolution, likely due to the growing pixel count interacting with more demanding rendering paths.

Similar Performance Alternatives

The database places the AMD Ryzen 5 2600 at the 75th percentile among all CPUs tested, with an average benchmark score of 21484. Its nearest rivals in the CPU benchmark rankings are closely clustered. The Intel Core Ultra 5 228V scores 21440, which is 0.2% lower. The Intel Core i9-11900H scores 21367, 0.5% lower. The Intel Xeon D-1746TER scores 21635, 0.7% higher. The AMD EPYC 9454 scores 21223, 1.2% lower. These deltas are all within a narrow band, meaning any of these processors would behave almost identically in CPU-bound scenarios for FiveM. The Ryzen 5 2600 sits in the middle of this group, with the Xeon slightly ahead and the EPYC slightly behind, but the differences are negligible for practical purposes.

For the GPU side, the NVIDIA GeForce RTX 5090 D ranks at the 92nd percentile among all GPUs, with an average benchmark score of 77712. Its nearest rivals are also tightly grouped. The AMD Radeon RX 6650M XT scores 76904, 1.1% lower. The AMD Radeon RX 6850M XT scores 78940, 1.6% higher. The NVIDIA Tesla P100 PCIe 12 GB scores 79396, 2.1% higher. The NVIDIA Tesla P100 PCIe 16 GB scores 79605, 2.4% higher. The RTX 5090 D is the lowest-scoring member of this particular rival group, but again the margins are small. A system using any of these GPUs would produce nearly identical frame rates in FiveM, assuming the CPU does not become a limiting factor.

When considering alternative combinations, the benchmark data suggests that pairing the Ryzen 5 2600 with any of the GPUs in its rival cluster would yield similar results to the RTX 5090 D. Likewise, pairing the RTX 5090 D with any of the CPUs in the Ryzen 5 2600's rival cluster would preserve the measured performance profile. The recorded FPS values are therefore representative of a broader family of hardware combinations rather than a unique outcome for this specific pairing.

CPU and GPU Roles

The benchmark results indicate that the RTX 5090 D is the dominant performance driver in this configuration, but the Ryzen 5 2600's influence becomes visible at lower resolutions and higher settings. The clearest evidence comes from comparing the scaling between 1080p and 4K. At Ultra settings, the average FPS drops from 152 at 1080p to 72 at 4K, a reduction of 53%. At Low settings, the drop is from 197 to 141, a reduction of 28%. If the GPU were the only factor, the scaling pattern would be more consistent across settings. The fact that Low settings show a smaller relative decline suggests that at lower settings, the CPU plays a larger role in determining the final frame rate, and that role becomes relatively larger as resolution drops.

At 1080p Low, the average FPS of 197 is likely constrained by the CPU's single-threaded performance ceiling for FiveM's multiplayer workloads. The Ryzen 5 2600's benchmark scores, including a PassMark single-thread score of 2239 and a Cinebench R15 single-core score of 157.3, indicate modest single-core capability by modern standards. The RTX 5090 D is far more powerful than needed for this workload, so the CPU becomes the limiting factor at lower resolutions where the GPU has spare capacity. At 4K Ultra, the GPU's rendering load increases substantially, and the average FPS of 72 suggests the GPU is now the primary constraint.

The Medium preset data provides additional insight because the database recorded minimum and maximum FPS values for this setting level. At 1080p Medium, the minimum is 154 FPS and the maximum is 208 FPS. At 1440p Medium, the minimum is 144 FPS and the maximum is 181 FPS. At 4K Medium, the minimum is 99 FPS and the maximum is 133 FPS. The fact that the maximum FPS values decline steadily from 208 to 133 as resolution increases indicates GPU scaling is occurring, while the minimum values show a similar pattern. This consistency confirms that both components are contributing to the measured averages, with the CPU contributing more at the low end of the resolution range and the GPU contributing more at the high end.

The Verdict

The verdict is clear: this PC can run FiveM at every resolution and preset combination recorded in the database. The playability threshold is 60 FPS, and all twelve measured configurations exceed it. At 3840x2160, the database lists High, Low, Ultra, and Medium as playable settings, with Ultra delivering 72 FPS as the best setting. This is above 60 FPS with 12 FPS of headroom, enough for a stable experience but not excessive. At 2560x1440, all four settings are playable, with Ultra at 130 FPS providing substantial margin. At 1920x1080, Ultra achieves 152 FPS, which is more than double the playability threshold.

The 4K Ultra result of 72 FPS is the closest any configuration comes to the threshold, but it still clears it comfortably. For users who prefer maximum visual quality at 4K, the system delivers acceptable performance. For users at 1440p or 1080p, the system offers significant overhead, meaning frame rates will remain high even in demanding multiplayer scenarios. The combination of the Ryzen 5 2600 and RTX 5090 D does not produce any configuration that falls below 60 FPS in the recorded data.

How This Combo Ranks

Among all tested hardware combinations in the database for FiveM, this pairing ranks 597th out of 3707 total combos. That places it in the 84th percentile of tested systems, meaning roughly 16% of recorded combinations perform better in this game. The ranking reflects the combined capabilities of the CPU and GPU as measured across the benchmark suite, and the recorded FPS values in FiveM align with the individual component percentiles: the CPU at the 75th percentile and the GPU at the 92nd percentile.

The rank of 597 out of 3707 indicates that while the GPU is exceptionally strong, the overall combo is held back by the CPU's more modest standing. Many higher-ranked combinations likely pair newer, faster processors with similarly powerful GPUs, allowing them to achieve higher frame rates in CPU-limited scenarios such as low resolution or low settings scenarios. The Ryzen 5 2600's position in the CPU rankings, near rivals like the Intel Core Ultra 5 228V, Intel Core i9-11900H, Intel Xeon D-1746TER, and AMD EPYC 9454, frames the CPU's contribution honestly: competitive with those processors but not ahead of the majority of tested CPUs.

FAQ

Q: What is the highest average FPS recorded for this system in FiveM?

A: The highest average FPS is 197, achieved at 1920x1080 with Low settings.

Q: Can this system maintain 60 FPS at 4K with Ultra settings?

A: Yes. The recorded average FPS at 3840x2160 with Ultra settings is 72 FPS, which is above the 60 FPS playability threshold.

Q: How does the Ryzen 5 2600 compare to its nearest CPU rivals?

A: The Ryzen 5 2600 has an average benchmark score of 21484. The Intel Core Ultra 5 228V scores 0.2% lower, the Intel Core i9-11900H scores 0.5% lower, the Intel Xeon D-1746TER scores 0.7% higher, and the AMD EPYC 9454 scores 1.2% lower.

Q: What is the difference between Low and Ultra settings at 1440p?

A: At 2560x1440, Low settings average 171 FPS while Ultra settings average 130 FPS, a difference of 41 FPS.

Q: How does the RTX 5090 D rank among all tested GPUs?

A: The RTX 5090 D sits at the 92nd percentile of all GPUs, with an average benchmark score of 77712. Its nearest rivals include the AMD Radeon RX 6650M XT at 1.1% lower, the AMD Radeon RX 6850M XT at 1.6% higher, and the NVIDIA Tesla P100 PCIe 16 GB at 12 GB at 2.1% higher.

Q: What is the lowest recorded minimum FPS for the Medium preset at 4K?

A: The lowest minimum FPS recorded for Medium settings at 3840x2160 is 99 FPS, with an average of 116 FPS and a maximum of 133 FPS.

Best Settings per Resolution

At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, with an average of 152 FPS. Lower settings produce higher frame rates, but Ultra represents the maximum visual quality while clearing the threshold. At 2560x1440, Ultra is also the best setting, achieving 130 FPS. At 3840x2160, Ultra delivers 72 FPS, again above the threshold. The database confirms these are the best settings at each resolution, meaning no higher preset exists beyond Ultra in the test matrix. The system therefore offers maximum visual fidelity at every resolution while maintaining playable frame rates, with the smallest margin being the 72 FPS at 4K Ultra.