Instant compatibility check with FPS benchmarks and optimization tips
Fivem
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 52 | 68 | 81 | 106 |
| 1440p QHD | 95 | 119 | 151 | 172 |
| 1080p Full HD | 138 | 164 | 182 | 197 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Fivem on Your System
Measured FPS Breakdown
The recorded data for Fivem with the AMD Ryzen 5 2600 and NVIDIA GeForce RTX 4070 SUPER covers three resolutions and four quality presets. All figures are average FPS, as minimum and maximum values were not captured.
At 3840x2160, the performance envelope spans from 51.6 FPS at Ultra to 106.3 FPS at Low. The Medium preset delivers 81.4 FPS, while High lands at 68.1 FPS. This is the only resolution where any preset falls below the 60 FPS playable threshold, and it happens at the most demanding setting.
At 2560x1440, every preset clears 60 FPS comfortably. Low produces 172.4 FPS, Medium reaches 151.3 FPS, High sits at 119 FPS, and Ultra remains fluid at 95.2 FPS. The gap between Low and Ultra here is 77.2 FPS, showing a wide but manageable spread.
At 1920x1080, the same pattern holds with higher headroom. Low peaks at 197.3 FPS, Medium follows at 182.3 FPS, High delivers 163.8 FPS, and Ultra still manages 138.3 FPS. Even the most demanding preset at 1080p stays well above the playable threshold, with 78.3 FPS of margin over 60 FPS.
The scaling from 1080p to 1440p is consistent across presets. For Ultra, the drop is from 138.3 to 95.2 FPS, a reduction of 43.1 FPS. High falls from 163.8 to 119 FPS, a 44.8 FPS reduction. Medium goes from 182.3 to 151.3 FPS, down 31 FPS, while Low moves from 197.3 to 172.4 FPS, a smaller 24.9 FPS reduction. This suggests that lower presets are less affected by resolution scaling, likely because they shift more of the load toward the CPU.
Moving from 1440p to 4K produces larger proportional drops. Ultra falls from 95.2 to 51.6 FPS, a 43.6 FPS loss. High drops from 119 to 68.1 FPS, a 50.9 FPS loss. Medium declines from 151.3 to 81.4 FPS, a 69.9 FPS loss. Low goes from 172.4 to 106.3 FPS, a 66.1 FPS loss. The 4K results show that the GPU becomes the dominant constraint at this resolution, especially at higher presets.
CPU and GPU Roles
The data reveals a clear division of labor between the Ryzen 5 2600 and the RTX 4070 SUPER depending on resolution and preset. At 1080p, the CPU is the primary limiter. The Ryzen 5 2600 has 6 cores and 12 threads, with a base clock of 3.40 GHz and boost clock of 3.90 GHz. Its PassMark single-thread score is 2239, and its average benchmark score is 21484, placing it in the 75th percentile among all CPUs. At 1080p Low, the combination reaches 197.3 FPS, but moving to Ultra only drops it to 138.3 FPS. The relatively modest spread suggests that even at Ultra, the CPU is still feeding frames as fast as it can, and the GPU has enough headroom to render them.
At 1440p, the balance shifts. The GPU starts to take on more responsibility, but the CPU still keeps pace. The 1440p Ultra result of 95.2 FPS is 43.1 FPS below the 1080p Ultra result, indicating that the additional pixel workload is now affecting the GPU. Yet the CPU does not become a bottleneck because the Ryzen 5 2600's 12 threads and 16 MB of shared L3 cache are sufficient for Fivem's multi-player workload at this level of demand.
At 4K, the GPU is clearly the dominant factor. The Ultra preset at 3840x2160 produces only 51.6 FPS, while even Medium reaches 81.4 FPS. The RTX 4070 SUPER has 7168 shading units, 224 texture mapping units, and 80 raster output units. Its memory bandwidth is 504.2 GB/s across a 192-bit bus with 12 GB of GDDR6X. These specifications handle 4K rendering, but the Ultra preset's demands exceed what the GPU can sustain at 60 FPS. The CPU is not the limiting factor here; the 4K Ultra result is a GPU-bound outcome.
The preset scaling at each resolution reinforces this interpretation. At 1080p, the difference between Low and Ultra is 59 FPS. At 1440p, it is 77.2 FPS. At 4K, it is 54.7 FPS. The larger spread at 1440p indicates a more balanced CPU-GPU interaction, where both components contribute to the frame rate. At 1080p, the CPU caps the upper range, compressing the spread. At 4K, the GPU caps the upper range, compressing it again.
Best Settings per Resolution
For 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, with an average of 138.3 FPS. This leaves 78.3 FPS of headroom above the playable threshold, meaning users can run the game at maximum quality without concern.
For 2560x1440, Ultra also remains playable, delivering 95.2 FPS. This is 35.2 FPS above the 60 FPS threshold, and it is the highest quality preset available in the measurements. The 1440p Ultra experience is fluid and leaves room for demanding multiplayer scenarios.
For 3840x2160, the most demanding preset that stays at or above 60 FPS is High, with an average of 68.1 FPS. Ultra falls to 51.6 FPS, which is 8.4 FPS below the threshold. Medium and Low also clear 60 FPS, but High is the best visual quality option that remains playable. The margin at High is only 8.1 FPS, so users should expect occasional dips in heavy multiplayer moments.
Similar Performance Alternatives
The nearest rivals for the AMD Ryzen 5 2600, based on average benchmark scores, include the Intel Core Ultra 5 228V at 21440, which is 0.2% ahead. The Intel Core i9-11900H scores 21367, also 0.5% ahead. The Intel Xeon D-1746TER scores 21635, which is 0.7% ahead. The AMD EPYC 9454 scores 21223, placing it 1.2% behind the Ryzen 5 2600. These deltas are all within 1.2% of the Ryzen 5 2600's average score of 21484, meaning any of these CPUs would behave nearly identically in Fivem from a CPU perspective.
For the NVIDIA GeForce RTX 4070 SUPER, the nearest rivals are all within 1% in average score. The NVIDIA Quadro M6000 24 GB scores 43262, which is 0.1% lower. The NVIDIA GeForce RTX 5050 Mobile scores 43268, also 0.1% lower. The NVIDIA Quadro M6000 scores 43301, 0.2% lower. The NVIDIA GeForce RTX 4090 Mobile scores 43667, which is 1% lower. The RTX 4070 SUPER has an average benchmark score of 43223 and sits in the 83rd percentile among all GPUs. Any of these alternatives would produce similar frame rates in Fivem, assuming the CPU remains the same.
FAQ
Q: Can this PC run Fivem at 1080p with Ultra settings?
A: Yes. The recorded data shows 138.3 FPS at 1920x1080 with Ultra settings, which is 78.3 FPS above the 60 FPS playable threshold.
Q: What is the best playable setting at 4K?
A: High is the most demanding preset that stays at or above 60 FPS at 3840x2160, with an average of 68.1 FPS. Ultra drops to 51.6 FPS, which is below the threshold.
Q: Is the CPU or GPU the limiting factor at 1440p?
A: The data indicates a balanced interaction. At 2560x1440, Ultra delivers 95.2 FPS and Low reaches 172.4 FPS. The 77.2 FPS spread between presets shows both components contributing, with the GPU taking on more work than at 1080p but the CPU still keeping pace.
Q: How does this combination rank among all tested combos?
A: It ranks 930 out of 3707 tested combinations in Fivem, placing it in the upper portion of the database.
Q: Is the RTX 4070 SUPER overkill for 1080p in Fivem?
A: The data suggests the CPU limits the upper range at 1080p. At 1920x1080 Low, the combination reaches 197.3 FPS, while Ultra reaches 138.3 FPS. The GPU has enough headroom that the CPU becomes the primary constraint at this resolution.
Q: What happens if the user switches from High to Ultra at 4K?
A: The frame rate drops from 68.1 FPS to 51.6 FPS, a loss of 16.5 FPS. This pushes the result below the 60 FPS playable threshold.
The Verdict
The data indicates that this PC can run Fivem at all three tested resolutions, but not at every preset. At 1920x1080, all four presets clear 60 FPS, with Ultra delivering 138.3 FPS. At 2560x1440, all four presets also clear 60 FPS, with Ultra at 95.2 FPS. At 3840x2160, three presets clear 60 FPS: High at 68.1 FPS, Medium at 81.4 FPS, and Low at 106.3 FPS. The Ultra preset at 4K falls short at 51.6 FPS.
The verdict by resolution is straightforward. For 1080p, the system is fully playable at maximum settings with substantial headroom. For 1440p, it is also fully playable at maximum settings, with 35.2 FPS of headroom above the threshold. For 4K, the system is playable at High settings, but users who want Ultra will need to accept a frame rate below 60 FPS. The best playable setting at 4K is High, with an average of 68.1 FPS.
How This Combo Ranks
In the database of tested combinations for Fivem, this pairing of the AMD Ryzen 5 2600 and NVIDIA GeForce RTX 4070 SUPER ranks 930 out of 3707 combinations. This places it in the top 25.1% of tested systems. The ranking reflects the combination's ability to deliver high frame rates at 1080p and 1440p, and playable performance at 4K High. The CPU's 75th percentile standing among all CPUs and the GPU's 83rd percentile standing among all GPUs combine to produce a system that is well above average for this game, though not at the very top of the database. The nearest CPU rivals, all within 1.2% in average score, would not meaningfully change the ranking, and the nearest GPU rivals, all within 1% in average score, would similarly produce comparable results.