Instant compatibility check with FPS benchmarks and optimization tips
Fivem
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 29 | 35 | 45 | 56 |
| 1440p QHD | 51 | 68 | 85 | 105 |
| 1080p Full HD | 74 | 97 | 124 | 159 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Fivem on Your System
The AMD Ryzen 5 2600 paired with the NVIDIA GeForce RTX 2060 SUPER is a measured combination in the database for Fivem, and the recorded results answer the question directly: yes, it runs the game, with comfortable headroom at 1080p and 1440p, but 4K is off the table at any preset. The Ryzen 5 2600 is a 6-core, 12-thread Zen+ processor on the AM4 socket with a 3.40 GHz base and 3.90 GHz boost clock, while the RTX 2060 SUPER brings 8 GB of GDDR6 on a 256-bit bus with 448 GB/s of bandwidth. Both parts sit in the upper-middle of the historical field, and the data shows a pairing that holds a 60 FPS threshold at two of the three tested resolutions.
Best Settings per Resolution
The playable threshold used by the database is 60 FPS average, and applying it to the measured results produces a clear settings ladder for Fivem.
At 1920x1080, the most demanding preset that stays at or above the threshold is Ultra, delivering 74.4 FPS average. Every preset clears the bar at this resolution: Low runs at 159.2 FPS, Medium at 123.6 FPS, High at 97.3 FPS, and Ultra at 74.4 FPS. A 1080p player can simply max the game out.
At 2560x1440, the ceiling drops to High, which averages 67.9 FPS. Medium holds 84.9 FPS and Low reaches 105.1 FPS, while Ultra falls to 51.2 FPS and drops below the threshold. The sweet spot at 1440p is High.
At 3840x2160, no preset qualifies. Low manages 55.8 FPS, Medium 45.3 FPS, High 34.5 FPS, and Ultra 29.2 FPS. Even the lowest preset misses 60 FPS, so 4K play is not achievable with this hardware in Fivem without accepting sub-threshold frame rates.
CPU and GPU Roles
The scaling data points firmly at a GPU-bound profile. Moving from 1080p to 1440p at Ultra cuts the average from 74.4 FPS to 51.2 FPS, a steep loss that indicates the RTX 2060 SUPER is the limiting component as pixel count rises. The pattern repeats across every preset: Low falls from 159.2 FPS to 105.1 FPS, Medium from 123.6 FPS to 84.9 FPS, and High from 97.3 FPS to 67.9 FPS when stepping up to 1440p. If the Ryzen 5 2600 were the bottleneck, frame rates would stay roughly flat across resolutions, and they do not.
The 4K results confirm this. Even at Low settings, where CPU load is typically highest relative to GPU load, the average drops to 55.8 FPS, well below the 159.2 FPS the same preset achieves at 1080p. The GPU runs out of throughput long before the processor does.
That said, the CPU is not a weak link for this title. Fivem released in 2017 as a multiplayer experience, and the Ryzen 5 2600's 6 cores and 12 threads, backed by 16 MB of shared L3 cache, sit in the 75th percentile of all CPUs in the database. Its single-thread Passmark score of 2239 and Geekbench single-core score of 1154 are adequate for a game of this era. The practical takeaway: at 1080p and 1440p in Fivem, upgrading the GPU would yield gains, while the processor is comfortably sufficient.
How This Combo Ranks
Out of 3707 tested combinations in Fivem, the Ryzen 5 2600 plus RTX 2060 SUPER ranks 2706. That places it in the back half of the field for this specific game, which reflects the age of both components rather than unplayability: the CPU launched at $199 MSRP in April 2018 and the GPU carried a $399 launch MSRP in July 2019.
Context from the component-level data helps interpret the rank. The RTX 2060 SUPER sits in the 62nd percentile of all GPUs with an average benchmark score of 18093, while the Ryzen 5 2600 sits in the 75th percentile of CPUs with an average score of 21484. The combo's game ranking trails those component percentiles because Fivem leaderboards include much newer pairings, but the measured frame rates show the combination still clears the 60 FPS bar at two resolutions with settings to spare.
Similar Performance Alternatives
For anyone shopping near this performance level, the database's rival data identifies hardware that behaves similarly.
On the GPU side, the closest match is the NVIDIA GeForce RTX 3060 Mobile, whose average score of 18159 is just 0.4 percent higher than the RTX 2060 SUPER's 18093. The AMD Radeon Pro 5700 follows at 18189, 0.5 percent ahead, meaning it would deliver essentially identical Fivem results. Further out but still nearby, the AMD Radeon RX 460 averages 18373 (1.5 percent ahead) and the Intel Arc A770M averages 18383 (1.6 percent ahead). Any of these four cards would reproduce the measured frame rates within a small margin.
On the CPU side, the Ryzen 5 2600's rivals are a more eclectic set, which is typical of aggregate benchmark scoring. The Intel Core Ultra 5 228V averages 21440, only 0.2 percent below the Ryzen's 21484, and the Intel Core i9-11900H averages 21367, 0.5 percent below. The Intel Xeon D-1746TER scores 21635, 0.7 percent above, and the AMD EPYC 9454 averages 21223, 1.2 percent below. In practice, any of these processors paired with an equivalent GPU would generate nearly the same Fivem experience, with the GPU remaining the component that sets the resolution ceiling.
Measured FPS Breakdown
All figures below are measured averages from the database; minimum and maximum frame rates were not recorded for this test set.
1920x1080:
- Low: 159.2 FPS
- Medium: 123.6 FPS
- High: 97.3 FPS
- Ultra: 74.4 FPS
2560x1440:
- Low: 105.1 FPS
- Medium: 84.9 FPS
- High: 67.9 FPS
- Ultra: 51.2 FPS
3840x2160:
- Low: 55.8 FPS
- Medium: 45.3 FPS
- High: 34.5 FPS
- Ultra: 29.2 FPS
The gaps between presets are consistent and predictable. At 1080p, each step up the settings ladder costs roughly 25 FPS: 35.6 FPS from Low to Medium, 26.3 FPS from Medium to High, and 22.9 FPS from High to Ultra. At 1440p the losses are 20.2, 17.0, and 16.7 FPS per step. At 4K the losses compress further (10.5, 10.8, and 5.3 FPS per step) because the GPU is already saturated at the lower presets. The headline numbers are the 74.4 FPS at 1080p Ultra and 67.9 FPS at 1440p High, the two configurations where the game is both visually maxed or near-maxed and above the 60 FPS threshold.
FAQ
Q: Can the Ryzen 5 2600 and RTX 2060 SUPER run Fivem?
A: Yes. The measured data shows the combo exceeds 60 FPS average at 1080p on every preset including Ultra (74.4 FPS), and at 1440p on Low, Medium, and High, topping out at 67.9 FPS on High.
Q: What are the best settings for 1080p?
A: Ultra, averaging 74.4 FPS. It is the most demanding preset that stays at or above the 60 FPS playable threshold.
Q: What are the best settings for 1440p?
A: High, averaging 67.9 FPS. Ultra at 1440p drops to 51.2 FPS, below the threshold, while Medium (84.9 FPS) and Low (105.1 FPS) offer smoother alternatives.
Q: Can this combination handle 4K in Fivem?
A: No. Even the Low preset averages only 55.8 FPS at 3840x2160, and Ultra falls to 29.2 FPS. No preset at 4K reaches 60 FPS.
Q: Is the CPU or the GPU the bottleneck?
A: The GPU. Frame rates fall sharply as resolution rises, from 159.2 FPS at 1080p Low to 55.8 FPS at 4K Low, which is the signature of a GPU-limited configuration. The Ryzen 5 2600, in the 75th percentile of all CPUs, is not the constraint.
Q: How does this pairing rank against other tested combinations?
A: It ranks 2706 out of 3707 combos in Fivem, placing it in the lower half of the field, though its measured frame rates still clear the playable threshold at 1080p and 1440p.