Fivem

The AMD Ryzen 5 2600 paired with the NVIDIA GeForce RTX 2060 delivers a playable experience for Fivem at 1080p and 1440p, but it cannot maintain 60 FPS at 4K under any tested preset. The recorded data shows that this combo is best suited for 1920x1080 gaming, where it clears the 60 FPS threshold across all settings, and it remains viable at 2560x1440 with High settings or lower. The 4K results are the only outright failure point, with even Low settings falling short of the playable threshold.

Measured FPS Breakdown

The benchmark results for this combo cover three resolutions and four quality presets, with average FPS recorded for each combination. Minimum and maximum FPS values were not captured in the database, so the analysis relies on average frame rates.

At 1920x1080, the combo performs strongly across the board. Low settings produce an average of 143.8 FPS, which is the highest recorded figure for this pairing. Medium settings drop to 116.6 FPS, still well above the 60 FPS threshold. High settings yield 89.3 FPS, and Ultra settings, the most demanding preset, still manage 71.1 FPS. Every preset at 1080p clears the playable threshold, and the gap between Low and Ultra is 72.7 FPS, indicating that the GPU has ample headroom even when graphical demands are at their maximum.

Moving to 2560x1440, the performance scales down but remains respectable. Low settings deliver 96.3 FPS, which is a 47.5 FPS reduction compared to the same preset at 1080p. Medium settings produce 75.7 FPS, and High settings hit exactly 60.0 FPS, which is the playable threshold. Ultra settings, however, fall below the mark at 48.3 FPS. The data shows that 1440p is playable up to High quality, but Ultra is not viable.

At 3840x2160, the combo struggles. Low settings average 51.8 FPS, which is shy of the 60 FPS target. Medium settings drop to 43.6 FPS, High settings fall to 35.1 FPS, and Ultra settings bottom out at 24.7 FPS. None of the 4K presets reach the playable threshold, and the performance degradation from 1080p to 4K is substantial: Low settings lose 92.0 FPS, while High settings lose 54.2 FPS.

The scaling pattern across resolutions shows a consistent drop as pixel count increases. At 1080p, the combo is clearly GPU-bound at higher presets, but at 4K, the overall performance is too low for any preset to be considered playable.

FAQ

Q: Can this PC run Fivem at 1920x1080 with Ultra settings?

A: Yes. The recorded average FPS at 1080p Ultra is 71.1, which is above the 60 FPS playable threshold. This is the most demanding preset tested at this resolution, and it still clears the target.

Q: What is the best settings preset for 2560x1440?

A: The best playable preset at 1440p is High, which averages exactly 60.0 FPS. Low and Medium also clear the threshold at 96.3 and 75.7 FPS respectively, but High offers the highest quality while maintaining the 60 FPS minimum.

Q: Is 4K gaming possible with this combo?

A: No. At 3840x2160, even Low settings only reach 51.8 FPS average, which is below the 60 FPS threshold. The verdict data lists no playable settings at this resolution.

Q: How much performance is lost when moving from 1080p to 1440p at the same settings?

A: At Low settings, the average FPS drops from 143.8 at 1080p to 96.3 at 1440p, a reduction of 47.5 FPS. At High settings, the drop is from 89.3 to 60.0, a 29.3 FPS reduction. The percentage loss varies by preset, but the absolute drop is larger at lower quality settings.

Q: What is the highest average FPS recorded for this combo?

A: The highest recorded average is 143.8 FPS, achieved at 1920x1080 with Low settings. This is the only configuration in the database that exceeds 140 FPS for this pairing.

Q: Does the combo rank highly among all tested combinations?

A: The combo ranks 2906 out of 3707 total combinations tested in Fivem. This places it in the lower portion of the database, reflecting that while it can run the game at common resolutions, many other hardware pairings deliver higher performance.

How This Combo Ranks

The database places this AMD Ryzen 5 2600 and RTX 2060 combination at rank 2906 out of 3707 tested combos for Fivem. This position indicates that the pairing sits in the lower third of all recorded configurations. The ranking is influenced by the CPU and GPU individually, as well as their interaction in this specific game.

Looking at the CPU alone, the Ryzen 5 2600 has an average benchmark score of 21484 across all tests, which places it at the 75th percentile among all CPUs. Its nearest rivals in the database are the Intel Core Ultra 5 228V with an average score of 21440 (0.2% higher), the Intel Core i9-11900H at 21367 (0.5% higher), the Intel Xeon D-1746TER at 21635 (0.7% lower), and the AMD EPYC 9454 at 21223 (1.2% higher). These deltas are all within 1.2% of the Ryzen 5 2600, meaning the CPU's raw compute performance is competitive with a broad range of modern processors.

The GPU, however, is less impressive relative to its peers. The RTX 2060 has an average benchmark score of 15290, placing it at the 58th percentile among all GPUs. Its nearest rivals include the NVIDIA GeForce GTX 580 at 15283 (0.0% delta), the AMD Radeon 680M at 15270 (0.1% higher), the NVIDIA GeForce RTX 3050 OEM at 15199 (0.6% higher), and the AMD Radeon RX 7600 at 15171 (0.8% higher). These figures show the RTX 2060 is essentially tied with several other mid-range options, but the small deltas mean the GPU's performance is not a differentiator in Fivem.

The combination of a strong CPU and a middling GPU explains the overall rank. In Fivem, the game's multiplayer nature often places demands on both components, but the measured FPS at 1080p and 1440p suggests the GPU is the limiting factor at higher presets. The rank of 2906 out of 3707 reflects that many combos with newer GPUs or higher-end CPUs outperform this pairing, but it does not mean the combo is inadequate for the tested resolutions.

The Verdict

The verdict by resolution is clear. At 1920x1080, this combo is fully playable at all four tested presets: Low, Medium, High, and Ultra. The best settings at this resolution are Ultra, which delivers an average of 71.1 FPS, comfortably above the 60 FPS threshold. Players seeking maximum visual quality can run the game at its highest preset without worrying about frame rate drops below the playable mark.

At 2560x1440, the combo is playable at Low, Medium, and High settings. The best settings are High, which averages exactly 60.0 FPS. This is the highest quality preset that clears the threshold; Ultra at 48.3 FPS falls short. For 1440p users, High is the recommended ceiling.

At 3840x2160, the combo cannot achieve playable frame rates at any preset. Low settings average 51.8 FPS, Medium at 43.6, High at 35.1, and Ultra at 24.7. None reach the 60 FPS threshold, and even the lowest quality preset leaves a deficit of 8.2 FPS. The data indicates that 4K is not a viable resolution for this hardware in Fivem.

In summary, this PC can run Fivem effectively for 1080p and 1440p displays, with 1080p offering the best experience due to higher headroom across all presets. The system is not suitable for 4K gaming in this title.

CPU and GPU Roles

The relative importance of the CPU versus the GPU in Fivem changes depending on the resolution and preset. The measured FPS scaling across resolutions provides insight into which component is the bottleneck.

At 1920x1080, the combo shows a wide spread between presets: Low at 143.8 FPS, Medium at 116.6, High at 89.3, and Ultra at 71.1. This spread of 72.7 FPS between Low and Ultra indicates that the GPU is heavily taxed as settings increase. The CPU, a Ryzen 5 2600 with 6 cores and 12 threads, has enough headroom at this resolution to feed the GPU at lower presets, but as the graphical load rises, the GPU becomes the limiting factor. The fact that Ultra still clears 60 FPS suggests the GPU is sufficient for 1080p, but the large performance gap between presets points to GPU-bound behavior.

At 2560x1440, the pattern persists but with lower absolute values. Low at 96.3 FPS, Medium at 75.7, High at 60.0, and Ultra at 48.3. The difference between Low and Ultra is 48.0 FPS, narrower than at 1080p but still substantial. The CPU's role here is less pronounced because the GPU is working harder to fill more pixels. The drop from 1080p Low (143.8) to 1440p Low (96.3) is a 33% reduction, which is consistent with a GPU-bound scenario where the additional pixel count directly impacts frame rate.

At 3840x2160, the GPU is clearly the dominant constraint. The highest FPS at 4K is 51.8 on Low, and the spread between Low and Ultra is 27.1 FPS. The CPU has ample capacity at this resolution, as the GPU is unable to reach even modest frame rates. The scaling from 1440p Low (96.3) to 4K Low (51.8) is a 46% reduction, further confirming that the GPU's rendering throughput is the primary factor.

The data shows that for Fivem, the GPU is the more significant component at all resolutions, but the CPU becomes relatively more important at 1080p where the GPU can produce high frame rates. At 4K, the GPU is so heavily loaded that the CPU's role is minimal. The Ryzen 5 2600's benchmark performance, which is within 1.2% of its nearest rivals, ensures it does not bottleneck the RTX 2060 in this game, except possibly at the very lowest presets at 1080p where frame rates exceed 140 FPS.

Best Settings per Resolution

Based on the measured FPS and the 60 FPS playable threshold, the best settings for each resolution are as follows.

At 1920x1080, the most demanding preset that remains playable is Ultra, with an average of 71.1 FPS. This is the highest quality option available, and it clears the threshold by 11.1 FPS. All lower presets are also playable, but Ultra provides the best visual fidelity without sacrificing playability.

At 2560x1440, the most demanding playable preset is High, averaging exactly 60.0 FPS. This preset sits precisely at the threshold, so it is the maximum quality option for 1440p. Medium at 75.7 FPS and Low at 96.3 FPS are also viable, but High offers the best balance of quality and performance.

At 3840x2160, no preset meets the 60 FPS threshold, so there is no best setting. The closest option is Low at 51.8 FPS, but it falls 8.2 FPS short of playable. Users targeting 4K would need to reduce resolution or accept sub-60 FPS performance, as the database records no playable settings at this resolution.

For the highest frame rates, 1080p Low delivers 143.8 FPS, which is ideal for competitive play. For a balanced experience at 1440p, High at 60.0 FPS is the recommended setting. The database shows that this combo is best utilized at 1080p, where it can run the game at maximum settings, or at 1440p with High quality, for a solid 60 FPS experience.