SYSTEM ANALYZER

Rate My PC: Intel Core Ultra 9 285T + AMD Radeon RX 6600

Get a comprehensive performance analysis of your gaming rig with detailed benchmarks, bottleneck detection, and upgrade recommendations

92 / 100
ULTIMATE READY

Apex Performer

Top 8% of systems. Capable of 4K Ultra gaming and advanced rendering.

4K 60+ FPSVR ReadyRay Tracing

System Balance Analysis

CPU vs GPU performance ratio
Well Balanced
CPU
94%
VS
GPU
91%
PROCESSOR

Intel Core Ultra 9 285T

51,310 Benchmark Score
Top 6% Market Ranking
View Full Specs →
GRAPHICS CARD

AMD Radeon RX 6600

19,036 Benchmark Score
Top 9% Market Ranking
View Full Specs →

Market Position

How your build compares to others
Budget
0-30
Mid-Range
30-60
High-End
60-85
Enthusiast
85-100
Your Build

Game Performance Benchmarks

Real-world 4K FPS in popular titles
View All Games →

Performance Insights

Tips to maximize your system

Optimal Performance

Your system is in the top tier. You can run any modern game at maximum settings.

4K Gaming Ready

Consider a 4K 144Hz monitor to fully utilize your hardware capabilities.

Compatible Games See what you can play Compare CPUs Find upgrades Compare GPUs Find upgrades

Performance Tiers Explained

90-100

Ultimate

4K Ultra gaming, VR ready, ray tracing enabled, professional workloads

4K 60+ FPS VR Ready
70-89

High-End

1440p Ultra or 4K High settings, excellent for modern AAA titles

1440p Ultra 4K High
50-69

Mid-Range

1080p Ultra or 1440p Medium, great value for most gamers

1080p Ultra 1440p Med
30-49

Entry Level

1080p Medium settings, suitable for eSports and older titles

1080p Med eSports
0-29

Legacy

Basic gaming, older titles, consider upgrading for modern games

720p-1080p Low Older Games

Intel Core Ultra 9 285T is a 24-core, 24-thread desktop processor built on the Arrow Lake architecture using a 3 nm process from TSMC. Its base clock is 1.40 GHz, boosting up to 5.40 GHz, and it carries a 35 W TDP. The CPU’s benchmark scores place it strongly in the upper tier of desktop processors, with an average benchmark score of 51310 and a percentile ranking of 91 against all CPUs. This places it in a competitive position relative to other high-end desktop chips, with the data showing it is only 0.6% ahead of the Intel Core i9-14900T in average score, though it trails the Intel Core i9-13900F by 0.8%. The single-core performance is particularly notable: a Cinebench R23 single-core score of 4739 and a Passmark single-thread score of 4576 indicate excellent responsiveness for lightly-threaded tasks. Multi-core results are equally strong, with Cinebench R23 multi-core at 33573 and Passmark multithread at 39931, suggesting robust parallel processing capability.

CPU Analysis

The Intel Core Ultra 9 285T is a 24-thread processor with a 36 MB shared L3 cache and 3 MB L2 per core, built on a 3 nm TSMC process with 17,800 million transistors on a 243 mm² die. The architecture is Arrow Lake-S, and the CPU supports DDR5 memory with a dual-channel bus, offering 102.4 GB/s of memory bandwidth and ECC support. The 35 W TDP is striking for a processor with this core count and boost clock, indicating that power efficiency is a central design goal. The integrated graphics are Arc Xe-LPG with 64 execution units, which can handle basic display output tasks without a discrete GPU. The processor’s 91st percentile ranking among all CPUs reflects its high-end positioning, and its average benchmark score of 51310 places it in a tight cluster with competitors like the Intel Core i9-14900T (51015, 0.6% slower) and the Intel Core i9-13900F (51730, 0.8% faster). The data shows that this CPU is essentially performance-equivalent to those rivals, with differences under 1.2% in either direction, meaning real-world workload differences will be marginal.

Looking at specific workloads, the Cinebench R20 multi-core score of 14100 and R15 multi-core score of 3384 confirm that the 24 threads are well-utilized in rendering tasks. The Passmark data compression score of 384140 and data encryption score of 32061 indicate strong throughput in data-intensive operations, while floating-point math at 137923 and integer math at 132433 show balanced arithmetic performance. The extended instructions score of 27477 suggests good support for modern SIMD workloads. The single-core performance, as evidenced by the Cinebench R23 score of 4739, is competitive with other high-end desktop parts, which matters for applications that rely on strong single-threaded responsiveness. The processor’s 91st percentile ranking means it outperforms the vast majority of CPUs in the database, and the nearest rival data shows it is within a 1.2% margin of the Intel Core i7-13850HX and AMD Ryzen 9 5900XT, indicating that the Ultra 9 285T is a top-tier choice for multi-core workloads.

FAQ

Q: What is the core and thread count of the Intel Core Ultra 9 285T?

A: The processor has 24 cores and 24 threads, with a base clock of 1.40 GHz and a boost clock of 5.40 GHz.

Q: How does the Ultra 9 285T compare to its nearest rival, the Intel Core i9-14900T?

A: The Ultra 9 285T has an average benchmark score of 51310, which is 0.6% higher than the Intel Core i9-14900T’s score of 51015, indicating nearly identical multi-threaded performance.

Q: What is the memory bandwidth of this CPU?

A: The Ultra 9 285T supports DDR5 memory with a dual-channel bus, providing a memory bandwidth of 102.4 GB/s, and it supports ECC memory.

Q: Does the processor include integrated graphics?

A: Yes, it features Arc Xe-LPG Graphics with 64 execution units, which can handle display output and basic graphics tasks without a discrete GPU.

Q: What is the TDP of the Ultra 9 285T, and what does that imply?

A: The TDP is 35 W, which is exceptionally low for a 24-core processor, suggesting that it is designed for power-constrained environments while still delivering high performance.

Q: What is the process node and foundry for this chip?

A: The CPU is built on a 3 nm process at TSMC, with a die size of 243 mm² and 17,800 million transistors.

Q: What is the launch MSRP of the Ultra 9 285T?

A: The launch MSRP is $549.

Usage Scenarios

For high-refresh gaming, the Ultra 9 285T’s single-core performance is a key asset, with a Cinebench R23 single-core score of 4739 and Passmark single-thread score of 4576, ensuring that game logic and physics calculations are processed quickly to keep frame times low. The 91st percentile CPU ranking means it will not bottleneck modern graphics cards in most titles, although the GPU pairing will ultimately determine frame rates. Streaming while gaming benefits from the 24 threads, as the Passmark multithread score of 39931 and Cinebench R23 multi-core score of 33573 allow for simultaneous encoding and gameplay without significant performance degradation. Video editing workloads, such as rendering timelines and exporting projects, are well-served by the multi-core throughput, with Cinebench R20 multi-core at 14100 indicating strong scaling across cores for tasks like color grading and effects processing. 3D rendering in applications like Blender or Cinema 4D will leverage the 24 threads effectively, and the data shows the CPU performs within 0.8% of the Intel Core i9-13900F, a known rendering workhorse, making it a capable choice for such tasks. Software development, including compilation of large codebases, benefits from the balanced integer and floating-point performance, with Passmark integer math at 132433 and floating-point math at 137923, reducing build times. For student and office work, the 35 W TDP and integrated graphics allow for a compact, low-power system that can handle spreadsheets, document editing, and web browsing with ease, while the high single-core score ensures snappy application launches and multitasking.

Balance and Bottleneck

The Intel Core Ultra 9 285T’s performance profile, with a 91st percentile CPU ranking, suggests it is unlikely to be the limiting factor in most workloads when paired with a mid-range GPU like the AMD Radeon RX 6600, which sits at the 63rd percentile among all GPUs. In gaming, the CPU’s high single-core score of 4739 in Cinebench R23 indicates that it can feed frames to the GPU efficiently, but the RX 6600’s lower relative performance means the GPU will typically be the bottleneck at higher resolutions. For CPU-bound scenarios, such as physics simulations or AI-driven game logic, the Ultra 9 285T’s 24 threads provide ample headroom, and its Passmark multithread score of 39931 shows it can handle heavy background tasks without impacting foreground performance. In content creation, the balance shifts depending on the application: rendering workloads will be bottlenecked by the GPU if using GPU-accelerated renderers, but CPU-based rendering will fully utilize the 24 threads, with the Cinebench R23 multi-core score of 33573 being the primary driver. The memory bandwidth of 102.4 GB/s is sufficient for the CPU’s needs, but the GPU’s 224.0 GB/s bandwidth is separate and could be a limiting factor in texture-heavy scenarios. The data shows that the CPU’s performance is within 1.2% of its nearest rivals, meaning that any bottleneck analysis must focus on the GPU or memory subsystem rather than the processor itself.

Upgrade Path and Platform

The Intel Core Ultra 9 285T uses the Intel Socket 1851, which is the platform for the Core Ultra Series 2 processors. It supports DDR5 memory with a dual-channel bus, and the memory bandwidth of 102.4 GB/s is fixed by the memory controller, so upgrading to higher-speed DDR5 modules will not increase bandwidth beyond this figure. The CPU provides PCIe Gen 5 with 20 lanes, which is available for high-speed storage and graphics cards, though the Radeon RX 6600 in this build uses PCIe 4.0 x8, meaning the GPU’s bandwidth is limited to that interface. The CPU’s TDP is 35 W, which is remarkably low, so the power delivery requirements are modest; however, the suggested PSU for the GPU is 300 W, so the total system power draw will be dominated by the graphics card. A sensible next upgrade for this platform would be a more powerful GPU, as the CPU’s 91st percentile ranking and high multi-core scores (e.g., Cinebench R23 multi-core at 33573) mean it can handle significantly faster graphics cards without becoming a bottleneck. The memory support for ECC is a feature that may appeal to workstation users, and the integrated graphics provide a fallback for troubleshooting or low-power operation. The platform supports PCIe Gen 5, so upgrading to a Gen 5 NVMe SSD would improve storage bandwidth, though the CPU’s 20 lanes must be shared between the GPU and other devices.

Who Should Build It

This build is suited for gamers who play at 1080p or 1440p with medium to high settings, as the Radeon RX 6600’s 63rd percentile GPU ranking indicates it can handle those resolutions, and the CPU’s high single-core score ensures consistent frame pacing. Content creators who work with video editing or 3D rendering will find the 24 threads useful for reducing export times, with the Cinebench R23 multi-core score of 33573 providing a clear performance advantage over lower-core-count CPUs. Developers compiling large codebases will benefit from the Passmark integer math score of 132433, which speeds up compilation, and the 35 W TDP allows for a quiet, efficient build that can run continuously. Students and office workers need a reliable system for productivity tasks, and the integrated graphics plus low power draw make this a practical choice for a compact desktop. Small business workstations that run virtual machines or database applications will appreciate the 24 threads and ECC memory support, ensuring data integrity. The CPU’s 91st percentile ranking means it is a top-tier part, and the build is best for users who prioritize CPU performance over GPU performance, as the RX 6600 is a mid-range card that will limit high-end gaming or GPU-accelerated workloads.

Benchmark Performance

The Intel Core Ultra 9 285T achieves an average benchmark score of 51310, placing it at the 91st percentile among all CPUs. Its nearest rival, the Intel Core i9-14900T, scores 51015, which is 0.6% lower, while the Intel Core i9-13900F scores 51730, which is 0.8% higher. In specific tests, the CPU scores 33573 in Cinebench R23 multi-core and 4739 in single-core, indicating strong performance in both parallel and single-threaded workloads. The Passmark suite shows a multithread score of 39931 and a single-thread score of 4576, confirming the balanced performance profile. The GPU, AMD Radeon RX 6600, has an average benchmark score of 19036 and sits at the 63rd percentile among all GPUs. Its nearest rival is the NVIDIA Quadro K6000 with a score of 19030 (0% delta), and the NVIDIA GeForce RTX 4050 Mobile scores 19049 (-0.1% delta), showing the RX 6600 is competitive with those parts. The combined percentile for this CPU+GPU pairing is 77, indicating that the system as a whole is above average. The GPU’s Passmark G3D score is 15096, and its 3DMark Steel Nomad DX12 score is 1492, providing a reference for its DirectX 12 performance. The data shows that the CPU significantly outperforms the GPU in relative percentile terms, meaning the system’s overall performance is more limited by the graphics card than the processor.

Build Overview

This is a desktop build combining the Intel Core Ultra 9 285T processor with the AMD Radeon RX 6600 graphics card. The CPU is a high-end 24-thread part with a 91st percentile ranking, while the GPU is a mid-range card at the 63rd percentile. The combined percentile for the pair is 77, which places the system in the upper-middle tier of desktop configurations. The CPU’s average benchmark score of 51310 is significantly higher than the GPU’s average score of 19036, reflecting the disparity in their relative performance classes. This pairing is unusual because the CPU is capable of driving much faster GPUs, but the RX 6600 provides a cost-effective graphics solution. The build class is desktop, and the data indicates that the system is well-suited for productivity tasks that leverage the CPU’s multi-core strength, while gaming performance will be constrained by the GPU. The processor’s 35 W TDP and the GPU’s 132 W TDP suggest a system that is power-efficient for its performance level, and the suggested 300 W PSU is adequate for this configuration.

Gaming Performance

No measured FPS data exists for this exact CPU+GPU combination, so all frame rate discussions are estimates based on the benchmark scores. The AMD Radeon RX 6600, with a Passmark G3D score of 15096 and a 3DMark Steel Nomad DX12 score of 1492, is expected to deliver playable frame rates at 1080p with medium to high settings in most modern games. At 1440p, the GPU’s 63rd percentile ranking suggests that performance will be more variable, with demanding titles potentially requiring lower settings to maintain 60 FPS. The CPU’s high single-core score of 4739 in Cinebench R23 ensures that it will not be a limiting factor in CPU-bound scenarios, such as open-world games with complex AI. For esports titles like Counter-Strike or Valorant, the RX 6600 can likely push high frame rates at 1080p, but the lack of measured data means these are speculative figures. The GPU’s 8 GB of GDDR6 memory with 224.0 GB/s bandwidth is sufficient for 1080p gaming, but may be a constraint at higher resolutions or with high-resolution texture packs. The CPU’s integrated graphics are not intended for gaming, so the discrete GPU is essential. Overall, the estimated gaming performance is consistent with a mid-range GPU paired with a high-end CPU, where the GPU determines the frame rate ceiling.

GPU Analysis

The AMD Radeon RX 6600 is built on the RDNA 2.0 architecture with the Navi 23 chip, manufactured on a 7 nm process at TSMC with 11,060 million transistors on a 237 mm² die. It has 8 GB of GDDR6 memory on a 128-bit bus, providing a bandwidth of 224.0 GB/s. The GPU’s base clock is 1626 MHz, with a boost clock of 2491 MHz and a game clock of 2044 MHz, and its TDP is 132 W. It features 1792 shading units, 112 TMUs, and 64 ROPs, along with 28 ray tracing cores, but no tensor cores, indicating that it lacks dedicated AI acceleration hardware. The FP32 performance is 8.928 TFLOPS, and FP16 is 17.86 TFLOPS (2:1), which is adequate for general compute tasks. The GPU’s benchmark scores include a Passmark G3D score of 15096, a Geekbench OpenCL score of 28850, and a Vulkan score of 67623, placing it at the 63rd percentile among all GPUs. Its nearest rival, the NVIDIA Quadro K6000, has a nearly identical average score of 19030 (0% delta), while the RTX 4050 Mobile is 0.1% faster. The GPU supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4, and features display outputs of 1x HDMI 2.1 and 3x DisplayPort 1.4a. The texture rate is 279.0 GTexel/s, and the pixel rate is 159.4 GPixel/s, which are moderate figures for a mid-range card. The GPU is end-of-life, and its predecessor is Navi, with the successor being Navi III. The ray tracing performance, as indicated by the 28 RT cores, is present but limited, meaning that ray-traced effects will likely require lower resolutions or settings to maintain playable frame rates. The GPU’s memory bandwidth of 224.0 GB/s is a potential bottleneck in high-resolution textures, but for 1080p gaming, it is sufficient. The 3DMark Steel Nomad DX12 score of 1492 provides a reference for modern DirectX 12 workloads, and the Passmark DirectX 11 score of 152 suggests that older APIs are well-supported. The GPU’s combined system percentile of 77 with the CPU indicates that it is the weaker component in this pairing, and upgrading it would yield the most significant performance gains in gaming and GPU-accelerated applications.