SYSTEM ANALYZER

Rate My PC: Intel Core i7-12800H + NVIDIA GeForce RTX 5070 Mobile

Get a comprehensive performance analysis of your gaming rig with detailed benchmarks, bottleneck detection, and upgrade recommendations

92 / 100
ULTIMATE READY

Apex Performer

Top 8% of systems. Capable of 4K Ultra gaming and advanced rendering.

4K 60+ FPSVR ReadyRay Tracing

System Balance Analysis

CPU vs GPU performance ratio
Well Balanced
CPU
90%
VS
GPU
94%
PROCESSOR

Intel Core i7-12800H

32,121 Benchmark Score
Top 10% Market Ranking
View Full Specs →
GRAPHICS CARD

NVIDIA GeForce RTX 5070 Mobile

29,928 Benchmark Score
Top 6% Market Ranking
View Full Specs →

Market Position

How your build compares to others
Budget
0-30
Mid-Range
30-60
High-End
60-85
Enthusiast
85-100
Your Build

Game Performance Benchmarks

Real-world 4K FPS in popular titles
View All Games →

Performance Insights

Tips to maximize your system

Optimal Performance

Your system is in the top tier. You can run any modern game at maximum settings.

4K Gaming Ready

Consider a 4K 144Hz monitor to fully utilize your hardware capabilities.

Compatible Games See what you can play Compare CPUs Find upgrades Compare GPUs Find upgrades

Performance Tiers Explained

90-100

Ultimate

4K Ultra gaming, VR ready, ray tracing enabled, professional workloads

4K 60+ FPS VR Ready
70-89

High-End

1440p Ultra or 4K High settings, excellent for modern AAA titles

1440p Ultra 4K High
50-69

Mid-Range

1080p Ultra or 1440p Medium, great value for most gamers

1080p Ultra 1440p Med
30-49

Entry Level

1080p Medium settings, suitable for eSports and older titles

1080p Med eSports
0-29

Legacy

Basic gaming, older titles, consider upgrading for modern games

720p-1080p Low Older Games

# GPU Analysis — VRAM, bandwidth, clocks, RT/tensor hardware, what the benchmark scores mean for rendering

The NVIDIA GeForce RTX 5070 Mobile pairs a Blackwell 2.0 architecture GPU (chip GB206) with 8 GB of GDDR7 memory on a 128-bit bus, yielding 384.0 GB/s of bandwidth. The GPU’s memory clock runs at 1500 MHz (24 Gbps effective), while the base and boost clocks sit at 907 MHz and 1425 MHz, respectively. This is a 5 nm part fabricated by TSMC, with 21,900 million transistors packed into a 181 mm² die, producing a transistor density of 121.0M per mm².

The RTX 5070 Mobile contains 4608 shading units, 144 texture mapping units, 48 raster output pipelines, 36 RT cores, and 144 tensor cores. Pixel rate is 68.40 GPixel/s, texture rate is 205.2 GTexel/s, and raw FP32 throughput is 13.13 TFLOPS (with FP16 at the same 1:1 rate). These figures place the GPU in the upper-midrange tier of mobile graphics. Benchmark data shows a Geekbench OpenCL score of 122238, a Geekbench Vulkan score of 116960, and a Passmark G3D score of 20355. The Passmark GPU compute score is 8279, while DirectX 12 and DirectX 11 scores are 93 and 192, respectively, with DirectX 10 at 129 and DirectX 9 at 214. The 2D score (Passmark G2D) is 896.

For rendering workloads, the 36 RT cores and 144 tensor cores are the key enablers of ray-traced effects and DLSS-style upscaling. The FP32 throughput of 13.13 TFLOPS indicates strong raw compute for rasterized rendering tasks, but the 8 GB VRAM capacity is a limiting factor for high-resolution textures and complex scenes. The 384.0 GB/s bandwidth is sufficient for 1080p and 1440p gaming, though 4K rendering may strain the memory subsystem. The GPU’s percentile ranking of 75 versus all GPUs means it outperforms roughly three-quarters of the field. Its nearest rivals in average score — the RTX 3070 Ti (29945, deltaPct -0.1), RTX 2080 Ti (29783, deltaPct 0.5), RX 6800 (30095, deltaPct -0.6), and RX 6700 (30433, deltaPct -1.7) — all have average scores within about 1.7% of this GPU’s 29928 average. This indicates the RTX 5070 Mobile performs essentially on par with these desktop-class parts from previous generations, which is notable for a mobile chip with a 50 W TDP.

The GPU supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4, covering modern graphics APIs comprehensively. The PCIe 5.0 x16 bus interface ensures ample bandwidth for data transfer, though the mobile form factor (slot width IGP, no power connectors) means it is integrated into a laptop motherboard rather than a discrete card.

# Usage Scenarios

High-refresh gaming: The RTX 5070 Mobile’s Passmark G3D score of 20355 and 75th percentile rank suggest it can drive high-refresh 1080p gaming comfortably. The 13.13 TFLOPS FP32 throughput and 68.40 GPixel/s pixel rate provide the fill rate needed for 144 Hz panels, though the 8 GB VRAM may cap texture quality at higher resolutions. The GPU’s parity with the RTX 3070 Ti and RTX 2080 Ti in average score indicates it matches the performance of those desktop cards, which were themselves capable of high-refresh 1080p and solid 1440p play.

Streaming: The 144 tensor cores provide hardware acceleration for encoding and AI-based features, while the 36 RT cores handle any real-time ray-traced effects during broadcasts. The Passmark GPU compute score of 8279 indicates strong parallel processing for encoding overlays and scene composition. The 50 W TDP means the GPU can sustain workloads without excessive thermal throttling, which is critical for long streaming sessions.

Video editing: Geekbench OpenCL and Vulkan scores of 122238 and 116960, respectively, demonstrate strong compute performance for video effects and color grading. The 8 GB GDDR7 memory with 384.0 GB/s bandwidth is adequate for 4K timelines, though multi-stream 8K projects may exceed capacity. The 4608 shading units provide enough parallel throughput for real-time previews of effects stacks.

3D rendering: The 36 RT cores accelerate ray-traced renders in applications that use DXR or OptiX, while the 144 tensor cores handle AI denoising. The 13.13 TFLOPS FP32 throughput is roughly in line with desktop GPUs from the previous generation, meaning render times for CPU-bound scenes will be dictated more by the CPU. The 8 GB VRAM is the primary constraint for large scenes, as texture-heavy assets may spill into system memory.

Software development: For developers working on GPU compute, the CUDA core count of 4608 and the 50 W TDP make this a capable platform for prototyping and testing. The PCIe 5.0 x16 interface supports fast data transfer for iterative builds. The Passmark DirectX 12 score of 93 and Vulkan 1.4 support allow low-level API development, while the 144 tensor cores enable experimentation with machine learning workloads.

Student and office work: The integrated Iris Xe 96EU GPU in the CPU handles everyday tasks, but the RTX 5070 Mobile provides headroom for more demanding applications like CAD or data visualization. The 8 GB VRAM is sufficient for most academic software, and the 75th percentile GPU rank means it outperforms most integrated solutions by a wide margin.

# CPU Analysis

The Intel Core i7-12800H is a 14-core, 20-thread processor based on Alder Lake architecture (codename Alder Lake-H), built on Intel’s 10 nm process node with a die size of 217 mm². It has a base clock of 2.40 GHz and a boost clock of 4.80 GHz, with a TDP of 45 W. The cache hierarchy includes 80 KB of L1 per core, 1.25 MB of L2 per core, and 24 MB of shared L3 cache. It supports DDR4 and DDR5 memory in a dual-channel configuration, and has 20 PCIe Gen 4 lanes from the CPU. The integrated graphics are Iris Xe with 96 execution units.

Benchmark results show strong multi-threaded performance: Cinebench R15 multicore scores 2222, Cinebench R20 multicore scores 8463, and Cinebench R23 multicore scores 15283. Single-core results are equally robust, with Cinebench R15 single-core at 265, R20 at 1194, and R23 at 1828. Passmark tests reinforce this: multithread score is 24346, single-thread is 3440, integer math is 86488, floating-point math is 60961, data compression is 273247, and data encryption is 16234. Extended instructions score 16408, find prime numbers scores 102, random string sorting scores 30453, and physics scores 1682.

The CPU’s percentile ranking versus all CPUs is 82, meaning it outperforms 82% of all processors in the database. Its average benchmark score is 32121, with nearest rivals including the Intel Core i5-14400 (avg score 32115, deltaPct 0), the Intel Core i7-13705H (avg score 32076, deltaPct 0.1), the Intel Core i5-14450HX (avg score 32040, deltaPct 0.3), and the Intel Core i9-11900 (avg score 32226, deltaPct -0.3). The near-zero deltaPct values indicate these processors are statistically indistinguishable in average performance.

The Alder Lake architecture uses a hybrid design typical of 12th-generation Intel parts, though the FACT PACK does not specify the exact P-core/E-core split. The 14 cores and 20 threads imply 6 performance cores and 8 efficiency cores (6+8=14 cores, 6×2+8×1=20 threads). The 4.80 GHz boost clock on the performance cores provides strong single-threaded responsiveness, as evidenced by the 3440 Passmark single-thread score. The 24 MB L3 cache is shared across all cores, which aids in multi-threaded workloads that access common data. The 45 W TDP is typical for a high-performance mobile processor, and the 10 nm process node balances power efficiency with clock speeds.

For real workloads, the Cinebench R23 multicore score of 15283 indicates this CPU handles video encoding, 3D rendering, and compilation tasks well, competing with desktop processors like the i5-14400. The single-core score of 1828 in R23 ensures snappy application launches and responsive UI. The Passmark data compression score of 273247 highlights strong integer performance for file archiving and database operations.

# Gaming Performance

No measured FPS rows exist for this exact combination — the FACT PACK contains no measuredFps data. Therefore, all frame rate figures below are estimates derived from the benchmark scores and should be treated as approximations rather than empirical results.

Based on the GPU’s Passmark G3D score of 20355 and its parity with the RTX 3070 Ti (deltaPct -0.1), the RTX 5070 Mobile should deliver roughly 60-90 FPS at 1440p ultra settings in modern AAA titles, with lighter esports titles exceeding 144 FPS at 1080p. The CPU’s Cinebench R23 single-core score of 1828 and 82nd percentile rank ensure that the i7-12800H will not bottleneck the GPU at these frame rates in most games. At 1080p ultra, the GPU’s 68.40 GPixel/s pixel rate and 205.2 GTexel/s texture rate suggest the system can push well above 100 FPS in optimized titles. At 4K ultra, the 8 GB VRAM and 384.0 GB/s bandwidth become limiting factors, with estimated frame rates dropping to 30-50 FPS depending on the game’s memory footprint.

The 144 tensor cores enable DLSS frame generation and upscaling, which can substantially boost effective frame rates in supported titles — potentially adding 50-100% performance in GPU-bound scenarios. The 36 RT cores provide hardware ray tracing support, though enabling ray tracing at 1440p ultra may reduce frame rates by 30-50% without DLSS intervention. Given the GPU’s 75th percentile rank, expectations should be set at high-refresh 1080p gaming or solid 1440p gaming, with 4K reserved for less demanding titles or with upscaling enabled.

# Balance and Bottleneck

The combined percentile rank of this CPU+GPU pairing is 79, indicating a well-matched system near the top quartile of all builds. The CPU’s 82nd percentile and GPU’s 75th percentile are close, suggesting neither component wildly outclasses the other. In CPU-bound workloads like physics simulation (Passmark physics score 1682) or data compression (273247), the i7-12800H is the primary driver, and the GPU has headroom to spare. In GPU-bound workloads like ray-traced rendering or high-resolution gaming, the RTX 5070 Mobile becomes the limiting factor, with the CPU waiting on the GPU’s output.

The FPS scaling evidence, though estimated, points to a balanced system at 1080p and 1440p. At 1080p, the CPU’s strong single-thread score (3440 Passmark) can feed the GPU adequately, but at lower resolutions and high frame rates, the CPU may become the bottleneck in lightly-threaded games. At 1440p and above, the GPU’s rendering load increases, shifting the bottleneck to the GPU. The CPU’s 20 threads ensure that multi-threaded games and background tasks (like streaming) do not starve the GPU of data.

The 45 W CPU TDP and 50 W GPU TDP create a combined thermal envelope that is manageable in a laptop chassis, but sustained loads may trigger thermal throttling that slightly reduces performance. The near-parity of the CPU’s rivals — the i5-14400 (deltaPct 0), i7-13705H (deltaPct 0.1), and i5-14450HX (deltaPct 0.3) — suggests that this CPU is not a performance outlier, but it is well-matched to a GPU that sits in a similar tier relative to its own rivals.

# FAQ

Q: What is the CPU’s core and thread count?

A: The Intel Core i7-12800H has 14 cores and 20 threads, with a base clock of 2.40 GHz and a boost clock of 4.80 GHz.

Q: How much VRAM does the RTX 5070 Mobile have, and what type?

A: The GPU has 8 GB of GDDR7 memory on a 128-bit bus, providing 384.0 GB/s of bandwidth.

Q: What is the GPU’s percentile rank, and which desktop GPUs does it compare to?

A: The RTX 5070 Mobile ranks in the 75th percentile of all GPUs. Its nearest rivals are the RTX 3070 Ti (deltaPct -0.1), RTX 2080 Ti (deltaPct 0.5), RX 6800 (deltaPct -0.6), and RX 6700 (deltaPct -1.7), all within about 2% of its average score.

Q: What is the CPU’s Cinebench R23 multicore score?

A: The i7-12800H scores 15283 in Cinebench R23 multicore and 1828 in single-core.

Q: Does the CPU support DDR5 memory?

A: Yes, the i7-12800H supports both DDR4 and DDR5 memory in a dual-channel configuration.

Q: What is the GPU’s TDP and slot width?

A: The RTX 5070 Mobile has a TDP of 50 W and a slot width of IGP (integrated graphics package), meaning it is soldered to the motherboard.

Q: Is the CPU’s multiplier unlocked for overclocking?

A: No, the multiplier is not unlocked (multiplierUnlocked is false).

# Benchmark Performance

The CPU’s average benchmark score is 32121, placing it in the 82nd percentile of all CPUs. Its Cinebench R23 multicore score is 15283, with a single-core score of 1828. Passmark multithread score is 24346, and single-thread is 3440. The GPU’s average benchmark score is 29928, placing it in the 75th percentile of all GPUs. Its Passmark G3D score is 20355, with Geekbench OpenCL at 122238 and Vulkan at 116960. The combined percentile for this pairing is 79.

The CPU’s nearest rival, the i5-14400, has an average score of 32115 with a deltaPct of 0, meaning the two are effectively tied. The i7-13705H (32076, deltaPct 0.1) and i5-14450HX (32040, deltaPct 0.3) are also within a fraction of a percent. The i9-11900 (32226, deltaPct -0.3) is marginally ahead. The GPU’s nearest rival, the RTX 3070 Ti, scores 29945 with a deltaPct of -0.1, indicating the RTX 5070 Mobile is slightly behind but within noise. The RTX 2080 Ti (29783, deltaPct 0.5) is slightly behind, while the RX 6800 (30095, deltaPct -0.6) and RX 6700 (30433, deltaPct -1.7) are ahead by less than 2%.

This combined picture shows a system where both components sit in the upper-middle tier of their respective categories. The CPU is slightly stronger relative to its field (82nd vs 75th percentile), but the deltaPct values against rivals are all within 2%, suggesting that neither component is a decisive outlier. The overall build performs at the 79th percentile of all systems, indicating a high-end laptop that competes with desktop configurations from a few years ago.

# Build Overview

This build pairs the Intel Core i7-12800H with the NVIDIA GeForce RTX 5070 Mobile in a laptop form factor (buildClass: laptop). The CPU is a 14-core, 20-thread Alder Lake-H processor with a 45 W TDP, while the GPU is a 50 W Blackwell 2.0 part with 8 GB GDDR7. The system’s combined percentile is 79, meaning it outperforms 79% of all recorded builds.

This is a high-performance mobile platform designed for users who need desktop-class performance in a portable chassis. The CPU’s 82nd percentile ranking and the GPU’s 75th percentile ranking indicate that this is a well-above-average configuration, though not at the absolute top tier. The near-parity of both components with their nearest rivals (all within 2%) suggests a balanced system without significant weak points. The 10 nm CPU and 5 nm GPU process nodes contribute to power efficiency, allowing both components to operate within their respective TDPs in a laptop thermal envelope.

# Who Should Build It

Gamers targeting 1080p high-refresh or 1440p 60+ FPS gaming will find this build well-suited, given the GPU’s 75th percentile rank and the CPU’s strong single-thread score of 3440. Content creators working with 4K video editing or 3D rendering can leverage the CPU’s Cinebench R23 multicore score of 15283 and the GPU’s 36 RT cores for accelerated workflows. Software developers who rely on parallel compilation, data processing, or GPU compute will benefit from the 20 threads and the 144 tensor cores. Students in engineering or data science fields running CAD, MATLAB, or machine learning frameworks will find the combination of 8 GB VRAM and 24 MB L3 cache adequate for their coursework. Small business workstations handling data compression (Passmark score 273247), encryption (16234), or database operations will see strong throughput from the CPU’s integer math performance (86488).

The system is less ideal for users requiring 4K gaming at ultra settings or heavy multi-GPU workloads, as the 8 GB VRAM and 50 W TDP are limiting factors. Similarly, users who need maximum portability or battery life may find the 45 W CPU and 50 W GPU TDPs demanding on power resources.

# Upgrade Path and Platform

The CPU uses the Intel BGA 1744 socket, which is a soldered mobile platform, meaning the processor cannot be upgraded without replacing the entire motherboard. The system supports DDR4 and DDR5 memory in a dual-channel configuration, allowing for memory upgrades up to the laptop’s maximum capacity (not specified in the FACT PACK). The CPU provides 20 PCIe Gen 4 lanes, while the GPU connects via PCIe 5.0 x16, ensuring ample bandwidth for current and near-future peripherals.

The GPU is an integrated package (slot width IGP) with no power connectors, so it is not upgradeable in a traditional sense. The 50 W TDP is fixed, and the suggested PSU is null, indicating that the laptop’s power delivery is pre-configured. The lack of a suggested PSU and the IGP form factor mean that any performance upgrade would require a new laptop rather than component swaps.

A sensible next upgrade would be increasing system memory to the maximum supported capacity, as the dual-channel DDR4/DDR5 support provides headroom for memory-intensive applications. Storage upgrades via the 20 PCIe Gen 4 lanes are also viable, allowing for faster NVMe SSDs. For users seeking more GPU performance, the only path forward is a full system replacement with a newer mobile platform, as the RTX 5070 Mobile’s 8 GB VRAM and 50 W TDP are fixed constraints. The CPU’s production status is active, and the GPU’s release date is 2025-04-14, indicating this is a current-generation platform with software support expected for several years. The PCIe 5.0 x16 bus on the GPU and PCIe Gen 4 on the CPU ensure compatibility with future external GPU enclosures, though the laptop form factor limits practical use of such solutions.