SYSTEM ANALYZER

Rate My PC: Intel Core i5-13600T + NVIDIA GeForce RTX 5070 Ti

Get a comprehensive performance analysis of your gaming rig with detailed benchmarks, bottleneck detection, and upgrade recommendations

94 / 100
ULTIMATE READY

Apex Performer

Top 6% of systems. Capable of 4K Ultra gaming and advanced rendering.

4K 60+ FPSVR ReadyRay Tracing

System Balance Analysis

CPU vs GPU performance ratio
Well Balanced
CPU
91%
VS
GPU
96%
PROCESSOR

Intel Core i5-13600T

35,305 Benchmark Score
Top 9% Market Ranking
View Full Specs →
GRAPHICS CARD

NVIDIA GeForce RTX 5070 Ti

49,957 Benchmark Score
Top 4% Market Ranking
View Full Specs →

Market Position

How your build compares to others
Budget
0-30
Mid-Range
30-60
High-End
60-85
Enthusiast
85-100
Your Build

Game Performance Benchmarks

Real-world 4K FPS in popular titles
View All Games →

Performance Insights

Tips to maximize your system

Optimal Performance

Your system is in the top tier. You can run any modern game at maximum settings.

4K Gaming Ready

Consider a 4K 144Hz monitor to fully utilize your hardware capabilities.

Compatible Games See what you can play Compare CPUs Find upgrades Compare GPUs Find upgrades

Performance Tiers Explained

90-100

Ultimate

4K Ultra gaming, VR ready, ray tracing enabled, professional workloads

4K 60+ FPS VR Ready
70-89

High-End

1440p Ultra or 4K High settings, excellent for modern AAA titles

1440p Ultra 4K High
50-69

Mid-Range

1080p Ultra or 1440p Medium, great value for most gamers

1080p Ultra 1440p Med
30-49

Entry Level

1080p Medium settings, suitable for eSports and older titles

1080p Med eSports
0-29

Legacy

Basic gaming, older titles, consider upgrading for modern games

720p-1080p Low Older Games

The Intel Core i5-13600T paired with the NVIDIA GeForce RTX 5070 Ti is a desktop combination that sits at the 86th percentile overall, indicating a high-tier system for demanding workloads. The CPU, a 14-core Raptor Lake part, and the GPU, a Blackwell 2.0 architecture card, present a distinct performance profile. This analysis examines the benchmark data to clarify the strengths and limitations of this pairing, focusing on what the scores indicate for specific tasks and where the system’s balance lies.

GPU Analysis — VRAM, bandwidth, clocks, RT/tensor hardware, what the benchmark scores mean for rendering

The NVIDIA GeForce RTX 5070 Ti is a substantial piece of hardware built on the Blackwell 2.0 architecture using a 5 nm process at TSMC. The chip, designated GB203, contains 45,600 million transistors on a 378 mm² die, yielding a transistor density of 120.6M per mm². The GPU operates with a base clock of 2295 MHz and a boost clock of 2452 MHz. Memory is a key feature: the card has 16 GB of GDDR7 on a 256-bit bus, delivering a bandwidth of 896.0 GB/s. The memory clock runs at 1750 MHz with 28 Gbps effective speed. This memory configuration provides ample capacity and high throughput for large textures and complex scenes.

The GPU’s compute resources are extensive. It features 8960 shading units, 280 TMUs, and 96 ROPs. For accelerated workloads, it includes 70 RT cores and 280 tensor cores. The theoretical performance metrics are a pixel rate of 235.4 GPixel/s and a texture rate of 686.6 GTexel/s. Raw compute power is rated at 43.94 TFLOPS for both FP32 and FP16, the latter at a 1:1 ratio. The card supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4, covering the full range of modern graphics APIs.

Benchmark results for the GPU show a mixed picture across different test types. The 3DMark Steel Nomad DX12 score is 6604, which is a modern test targeting DirectX 12 performance. Geekbench results are strong, with an OpenCL score of 212363 and a Vulkan score of 225122. The Passmark suite shows a G3D score of 32974 and a GPU compute score of 20203. Notably, the older DirectX tests show lower scores: DirectX 9 at 351, DirectX 10 at 192, DirectX 11 at 300, and DirectX 12 at 127. The G2D score is 1332.

The data indicates that the RTX 5070 Ti is optimized for modern, compute-heavy rendering workloads rather than legacy API performance. The high Vulkan and OpenCL scores suggest strong performance in applications that leverage these interfaces, such as professional 3D rendering and compute tasks. The 3DMark Steel Nomad score, while a single data point, indicates robust DX12 performance. The substantial VRAM capacity and bandwidth make the card well-suited for high-resolution textures and complex geometry. The 70 RT cores and 280 tensor cores provide dedicated hardware for ray tracing and AI-accelerated features, which are increasingly common in professional rendering pipelines. The FP32 throughput of 43.94 TFLOPS is a strong indicator for general compute and simulation workloads.

Benchmark Performance — exact CPU and GPU scores, percentile positions, and what the combined picture is

The combined system holds an 86th percentile ranking, which places it well above the median for all tested configurations. The CPU’s average benchmark score is 35305, placing it at the 85th percentile among all CPUs tested. The GPU’s average benchmark score is 49957, placing it at the 86th percentile among all GPUs. The alignment of these percentiles suggests a well-matched pair, with neither component being an outlier relative to the other in terms of overall standing.

Specific CPU benchmark scores include a Cinebench R23 multi-core score of 23571 and a single-core score of 3327. In Geekbench, the CPU scores 10851 multi-core and 2385 single-core. The Passmark multithread score is 27098, with a single-thread score of 3728. The GPU’s 3DMark Steel Nomad score is 6604. Geekbench OpenCL and Vulkan scores are 212363 and 225122, respectively. The Passmark G3D score is 32974.

Looking at the CPU’s nearest rivals, the Intel Core i7-12700K has an average score of 35287, a 0% delta. The Intel Core i7-12700KF scores 35365, a -0.2% delta. The Intel Core i7-13700T scores 35403, a -0.3% delta. The Intel Core 5 213PE scores 35428, a -0.3% delta. This places the i5-13600T essentially on par with these higher-tier or similar-tier parts, showing it punches above its expected weight class.

On the GPU side, the nearest rivals are surprising. The AMD Radeon RX Vega 64 has an average score of 50001, a -0.1% delta. The Intel Arc A550M scores 49737, a 0.4% delta. The AMD Radeon RX 6900 XT scores 50951, a -2% delta. The AMD Radeon RX 6800 XT scores 48477, a 3.1% delta. The RTX 5070 Ti is statistically tied with the RX Vega 64 and slightly ahead of the RX 6800 XT, but slightly behind the RX 6900 XT in this aggregate benchmark metric. The combined picture is one of a high-tier system where the CPU and GPU both perform near the 85th-86th percentile, indicating a balanced high-end configuration.

CPU Analysis — cores, clocks, architecture, what the benchmark scores mean for real workloads

The Intel Core i5-13600T is a 14-core, 20-thread processor based on the Raptor Lake architecture, specifically the Raptor Lake-S codename. It belongs to the Core 13th Gen series and is manufactured on Intel’s 10 nm process with a die size of 215 mm². The base clock is 1800.00 MHz, which is low, but the boost clock reaches 4.80 GHz. The TDP is rated at 35 W, which is notably low for a desktop part with this core count. The CPU supports both DDR4 and DDR5 memory in a dual-channel configuration and includes ECC memory support. It has 80 KB of L1 cache per core, 1.25 MB of L2 cache per core, and 24 MB of shared L3 cache. The processor uses the Intel Socket 1700 and provides PCIe Gen 5 with 16 lanes from the CPU. It includes integrated UHD Graphics 770. The launch MSRP is $255.

Benchmark results show a processor that excels in multi-threaded tasks relative to its power envelope. The Cinebench R23 multi-core score of 23571 is strong. In comparison, the single-core score of 3327 is also competitive. The Passmark data shows high throughput in specific tasks: data compression scores 337893, data encryption scores 19320, extended instructions score 20651, floating point math scores 70152, and integer math scores 96299. The find prime numbers score is 82, and random string sorting scores 36413.

Real workload implications follow from these numbers. The high multi-core scores in Cinebench and Passmark multithread (27098) indicate strong performance for video encoding, 3D rendering, and software compilation where all cores are utilized. The single-core scores suggest responsive performance for everyday tasks and applications that rely on fewer threads. The low 35 W TDP is a critical differentiator; this CPU offers performance on par with the Intel Core i7-12700K (which has a 0% delta in average score) while consuming significantly less power. This makes it an efficient choice for workloads that run for extended periods. The data encryption and compression scores are high, indicating suitability for archival tasks and security-related processing. The floating-point and integer math scores are robust, which is beneficial for scientific computing and financial modeling. The CPU’s percentile ranking at 85% places it in the top tier of all processors, confirming its capability for heavy workloads.

Balance and Bottleneck — which component limits which workload, using percentiles and FPS scaling as evidence

The balance between the Intel Core i5-13600T and the NVIDIA GeForce RTX 5070 Ti is a key consideration. The CPU is at the 85th percentile, and the GPU is at the 86th percentile. This near-identical standing suggests a system where neither component is a clear bottleneck in the aggregate. However, workload-specific behavior will vary.

For gaming, the GPU is typically the limiting factor at higher resolutions. The RTX 5070 Ti, with its 86th percentile ranking and high compute scores, is likely to be the primary driver of frame rates in graphically intensive titles. The CPU’s single-core performance, scoring 3327 in Cinebench R23, is adequate to feed the GPU in most scenarios, but at lower resolutions and high frame rates, the CPU could become the limiting factor. The low base clock of 1800 MHz is offset by the 4.80 GHz boost clock, but sustained all-core loads might see the CPU throttle to stay within its 35 W TDP, potentially limiting performance in CPU-bound scenarios.

For productivity workloads, the CPU’s multi-core performance is the deciding factor. The Cinebench R23 multi-core score of 23571 indicates that the CPU can handle demanding rendering and encoding tasks. The GPU’s compute capabilities, as shown by its Geekbench OpenCL score of 212363, can accelerate certain tasks like GPU-accelerated rendering or video encoding. The bottleneck in these scenarios depends on the software. If an application is optimized for GPU compute, the RTX 5070 Ti will carry the load. If it relies on CPU cores, the i5-13600T’s performance, constrained by its 35 W TDP, will be the ceiling.

The FPS scaling evidence is not available from measured data, as the FACT PACK contains no measured FPS rows for this combination. As an estimate based on the benchmark scores, the system is likely to be GPU-bound at 4K resolution, where the GPU’s 896.0 GB/s bandwidth and 16 GB VRAM are critical. At 1080p, the CPU’s single-thread performance and the system’s overall balance become more important, and the CPU may occasionally limit the GPU. The deltaPct values for the CPU’s rivals (all within -0.3% to 0%) show that the CPU is firmly in a performance class with other high-end parts, meaning it will not hold back the GPU in most scenarios, but the power constraint is a unique factor that could affect sustained performance.

FAQ

Q: What is the overall performance tier of the Intel Core i5-13600T and RTX 5070 Ti combination?

A: The combined system is at the 86th percentile. The CPU is at the 85th percentile among all CPUs, and the GPU is at the 86th percentile among all GPUs.

Q: How does the CPU compare to the Intel Core i7-12700K?

A: The Intel Core i5-13600T has an average benchmark score of 35305, while the Intel Core i7-12700K has a score of 35287, resulting in a 0% delta. They are statistically tied in performance.

Q: How does the GPU compare to the AMD Radeon RX 6900 XT?

A: The RTX 5070 Ti has an average score of 49957, while the AMD Radeon RX 6900 XT has a score of 50951, a -2% delta. The RX 6900 XT is slightly faster in this aggregate metric.

Q: What is the memory configuration of the GPU?

A: The RTX 5070 Ti has 16 GB of GDDR7 memory on a 256-bit bus, with a bandwidth of 896.0 GB/s.

Q: What is the TDP of the CPU and GPU?

A: The CPU has a TDP of 35 W, and the GPU has a TDP of 300 W.

Q: Does the CPU support ECC memory?

A: Yes, the Intel Core i5-13600T has ECC memory support.

Q: What is the launch MSRP of the CPU?

A: The launch MSRP for the Intel Core i5-13600T is $255.

Upgrade Path and Platform

The platform is based on the Intel Socket 1700 for the CPU and PCIe 5.0 x16 for the GPU. The CPU supports both DDR4 and DDR5 memory in a dual-channel configuration, offering flexibility in memory choice. The CPU provides 16 PCIe Gen 5 lanes, which are used for the GPU. The RTX 5070 Ti uses a PCIe 5.0 x16 interface, so it is fully compatible with the CPU’s lanes. The motherboard must have a Socket 1700 and support for the 13th Gen Core series to be compatible. The integrated UHD Graphics 770 in the CPU can serve as a fallback display output if the discrete GPU is not installed.

The power requirements are a key consideration. The CPU has a TDP of 35 W, and the GPU has a TDP of 300 W. The suggested PSU for the GPU is 700 W. This leaves headroom for the rest of the system components, such as storage and cooling. The GPU requires a single 16-pin power connector. The CPU’s low TDP means a capable air cooler is sufficient for the processor, reducing overall system cooling demands. The GPU is a dual-slot design, requiring adequate case space; its dimensions are 304 mm in length, 137 mm in height, and 48 mm in width.

A sensible next upgrade path would focus on the GPU, as the CPU is already performing at the 85th percentile and is tied with the Intel Core i7-12700K. The RTX 5070 Ti, at the 86th percentile, is similarly well-positioned, but future GPU generations would likely offer a more significant upgrade in graphics performance. The platform’s memory support for both DDR4 and DDR5 allows for a memory upgrade without changing the motherboard, provided the board supports the chosen type. The CPU’s 35 W TDP means there is no need for a high-end cooling solution, so the upgrade path is primarily defined by the GPU slot and PSU capacity.

Usage Scenarios

High-refresh gaming: The RTX 5070 Ti’s 86th percentile ranking and strong compute scores suggest it can handle high refresh rates at 1440p. The CPU’s single-core score of 3327 in Cinebench R23 is sufficient for most game engines, though the 35 W TDP may limit sustained all-core boosts in CPU-intensive titles.

Streaming: The GPU’s 280 tensor cores and support for modern APIs like DirectX 12 Ultimate provide hardware acceleration for encoding and streaming workloads. The CPU’s 14 cores and 20 threads can handle the encoding overhead alongside game logic, though the power constraint may require careful setting management.

Video editing: The CPU’s Cinebench R23 multi-core score of 23571 indicates strong performance for timeline editing and export. The GPU’s 16 GB VRAM and high bandwidth are beneficial for effects processing and GPU-accelerated rendering in software that supports it.

3D rendering: The GPU’s 43.94 TFLOPS FP32 performance and dedicated RT cores make it a capable renderer for GPU-accelerated engines. The CPU’s multi-core score supports CPU-based rendering, though the GPU will be the primary workhorse in most modern pipelines.

Software development: The CPU’s Passmark integer math score of 96299 and data compression score of 337893 indicate strong performance for code compilation and build tasks. The high thread count allows for parallel builds, improving iteration times.

Student and office work: The CPU’s single-core score of 3327 in Cinebench R23 ensures responsive performance for daily tasks like web browsing and document editing. The integrated UHD Graphics 770 provides a fallback if the GPU is not needed, though the discrete GPU is overkill for this use case. The 35 W CPU TDP contributes to a system that runs cool and quiet.

Build Overview

This is a desktop build combining the Intel Core i5-13600T with the NVIDIA GeForce RTX 5070 Ti. The CPU is a 14-core, 20-thread Raptor Lake part with a 35 W TDP, and the GPU is a Blackwell 2.0 architecture card with 16 GB of GDDR7 memory. The combined percentile is 86, placing the system in the top tier of performance. The CPU’s average benchmark score is 35305, placing it at the 85th percentile among all CPUs. The GPU’s average benchmark score is 49957, placing it at the 86th percentile among all GPUs. The system is a high-performance desktop configuration suitable for demanding applications. The CPU’s performance is tied with the Intel Core i7-12700K, showing it delivers high-end CPU performance in a low-power package. The GPU, while statistically tied with older high-end cards like the RX Vega 64 in this aggregate metric, offers modern features and a large VRAM buffer.

Who Should Build It

The system targets users who need high multi-threaded CPU performance and strong GPU compute capabilities. Gamers at 1440p or 4K will benefit from the GPU’s 16 GB VRAM and high bandwidth, which are suited for high-resolution textures. Content creators working with video editing or 3D rendering will find the CPU’s multi-core scores and the GPU’s compute performance valuable for reducing export and render times. Software developers compiling large codebases will benefit from the CPU’s 14 cores and 20 threads, as indicated by the high integer math and data compression scores. Students in engineering or data science fields will find the system capable for simulation and analysis workloads. Small business workstations requiring reliable performance for office applications, financial modeling, or light CAD work will be well-served by the CPU’s efficiency and the GPU’s capability, though the GPU may be more than necessary for basic office tasks.

Gaming Performance

No measured FPS data exists for this exact CPU and GPU combination. The FACT PACK contains no measured FPS rows, so the following figures are estimates based on the benchmark scores. The data is not measured but projected from the synthetic benchmarks.

For gaming, the RTX 5070 Ti’s 3DMark Steel Nomad score of 6604 indicates strong DirectX 12 performance. The GPU’s 86th percentile ranking suggests it will perform well in modern titles. At 4K resolution, the GPU is expected to be the primary bottleneck. The 16 GB VRAM is sufficient for high-resolution textures, and the 896.0 GB/s bandwidth supports high data throughput. At 1440p, the system is expected to be well-balanced, with the CPU’s single-core performance of 3327 in Cinebench R23 being adequate for most game engines. At 1080p, the CPU may become a limiting factor in CPU-intensive games due to its 35 W TDP, which could restrict sustained boost clocks. The GPU’s Passmark G3D score of 32974 is a high score, reinforcing its capability. The estimated FPS will vary by title, but the system is expected to deliver high frame rates at 1440p and playable frame rates at 4K in most games. The lack of measured data means these are qualitative expectations from the benchmark scores.