To The Core

To The Core

AVERAGE FPS
158
excellent

This combination delivers exceptional performance with an average of 158 FPS, perfect for high refresh rate gaming and competitive play.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 66 82 94 112
1440p QHD 115 143 165 195
1080p Full HD 171 213 246 290

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 112
3840x2160 Medium 94
3840x2160 High 82
3840x2160 Ultra 66
2560x1440 Low 195
2560x1440 Medium 165
2560x1440 High 143
2560x1440 Ultra 115
1920x1080 Low 290
1920x1080 Medium 246
1920x1080 High 213
1920x1080 Ultra 171

To The Core with Intel Core i5-11400F + AMD Radeon RX 9060, In-Depth Analysis

Intel Core i5-11400F and AMD Radeon RX 9060 is a pairing that targets high-refresh 1080p and solid 1440p play in To The Core, an Idle game that scales surprisingly well with hardware. The benchmark data shows a combo that delivers playable frame rates even at 4K Ultra, though the scaling patterns reveal where the bottleneck shifts between the CPU and GPU. With a combo rank of 1719 out of 2991 tested combinations, this setup sits in the upper-middle tier of the database, performing consistently across resolutions but never dominating the charts. The measured FPS figures indicate that the RX 9060 is the primary driver of performance in this title, with the i5-11400F providing sufficient headroom to avoid holding back the GPU at lower resolutions.

Resolution Scaling

The transition from 1080p to 4K produces a predictable but steep decline in average frame rates across all settings, highlighting the GPU-bound nature of To The Core at higher resolutions. At Low settings, the average FPS drops from 290 at 1920x1080 to 195 at 2560x1440, then to 112 at 3840x2160. That represents a 33% reduction moving from 1080p to 1440p, and another 43% drop from 1440p to 4K. The pattern is similar for High settings, where averages fall from 213 at 1080p to 143 at 1440p to 82 at 4K — a 33% and 43% decline respectively. This consistent scaling suggests the RX 9060's rendering load is the limiting factor as pixel count increases, with the CPU keeping pace even at the highest resolution tested.

Medium settings show the same trend, with averages of 246 at 1080p, 165 at 1440p, and 94 at 4K. The Ultra preset follows, delivering 171, 115, and 66 FPS across the three resolutions. The drop from 1080p to 1440p at Ultra is 33%, while the 1440p to 4K reduction is 43% — identical to the other presets. This uniformity across all settings indicates that resolution scaling is purely a function of GPU workload, with no unexpected CPU-related stalls appearing at higher resolutions. The minimum FPS values recorded only for Medium settings (209 at 1080p, 140 at 1440p, 80 at 4K) show that frame pacing remains stable, with the gap between average and minimum FPS widening slightly at higher resolutions — a 15% difference at 1080p versus a 15% difference at 4K, suggesting consistent rendering times rather than sporadic spikes.

The fact that 4K Ultra still averages 66 FPS is notable for an Idle game, indicating that this combo can handle demanding visual settings at high resolutions without dropping into unplayable territory. However, the data also shows that the RX 9060's 8 GB GDDR6 memory and 128-bit bus width begin to show limitations at 4K, where the performance gap between settings narrows — from a 70% difference between Low and Ultra at 1080p to a 70% difference at 4K, but with absolute numbers compressing. The 82 FPS at 4K High versus 112 FPS at 4K Low represents a 37% uplift from lowering settings, which is less than the 41% gain seen at 1440p and the 36% gain at 1080p, suggesting the GPU is becoming the dominant constraint regardless of preset choice.

How This Combo Ranks

With a combo rank of 1719 out of 2991 tested combos, this pairing places in the 57th percentile of all CPU-GPU combinations in the database for To The Core. This positioning is slightly lower than what the individual component percentiles might suggest — the i5-11400F ranks in the 71st percentile among all CPUs, while the RX 9060 sits in the 59th percentile among GPUs. The combination underperforms relative to the CPU's standalone strength, indicating that the GPU is the limiting factor in this title, which aligns with the resolution scaling data showing GPU-bound behavior.

The i5-11400F's nearest rivals in the CPU benchmark database provide context for its role. The AMD EPYC 7H12 scores 17120, which is 0.3% below the i5-11400F's 17177 average benchmark score, while the Intel Core i5-12450H scores 17239, just 0.4% above. The AMD Ryzen 3 PRO 8300G and Intel Core Ultra 7 164U are similarly close, with deltas of -0.6% and +0.6% respectively. This tight grouping means the i5-11400F's performance in To The Core is unlikely to differ meaningfully from these alternatives, as they all occupy the same performance tier. The GPU side shows a similar clustering, with the RX 9060's 16014 average benchmark score sitting just 0.7% below the NVIDIA GeForce RTX 3060 Ti's 16129, and 1% above both the AMD Radeon R9 370X and RX 7700.

The rank of 1719 suggests that while this combo handles To The Core well, there are 1272 other tested combinations that achieve higher FPS. Given the measured data showing 4K Ultra at 66 FPS, the combos ranking higher likely feature more powerful GPUs that push frame rates even further at 4K, or CPUs that better feed high-end graphics cards at lower resolutions. The 2991 total combos mean this pairing sits in the upper half of the database, but the Idle genre's modest graphical demands mean even mid-range hardware can achieve high frame rates, making the competition for top ranks intense. The data indicates that this combo's performance is solid but not exceptional, with the GPU's mid-tier positioning preventing it from breaking into the top quartile.

CPU Role

The Intel Core i5-11400F brings six cores and 12 threads to the pairing, with a base clock of 2.60 GHz and a boost clock of 4.40 GHz. This Rocket Lake processor, built on Intel's 14 nm process, has a 65 W TDP and supports DDR4 memory in dual-channel configuration with 51.2 GB/s bandwidth. The CPU's benchmark scores paint a picture of a balanced mid-range part: the Cinebench R23 multicore score of 14340 and single-core score of 2024 indicate strong thread utilization, while the Geekbench multicore of 7737 and single-core of 1777 confirm solid computational throughput.

In To The Core, an Idle game, the CPU's role is less demanding than in action-heavy titles, but the data shows it still matters. The 3DMark scores reveal the thread scaling characteristics: 5619 with 16 threads, 4691 with 8 threads, 3171 with 4 threads, and 1691 with 2 threads. This scaling from 2 to 16 threads shows a 3.3x improvement, indicating good multi-threading efficiency that benefits games using multiple cores. The Passmark multithread score of 16908 and single-thread score of 2981 further confirm that the CPU handles both lightly-threaded and heavily-threaded workloads competently.

The measured FPS data suggests the i5-11400F is not the bottleneck in this pairing. At 1080p Low, the combo achieves 290 FPS, which is well above what the RX 9060 alone would deliver if CPU-limited. The fact that FPS scales consistently with resolution — dropping by roughly 33% from 1080p to 1440p and 43% from 1440p to 4K across all settings — indicates that the GPU is fully utilized at each resolution, with the CPU providing frames faster than the GPU can render them. The boost clock of 4.40 GHz helps maintain high single-thread performance, which is often critical for game logic and frame pacing, and the 12 MB of shared L3 cache provides ample working set for game data.

The CPU's 71st percentile ranking among all CPUs, with an average benchmark score of 17177, places it above the median but not in enthusiast territory. Its nearest rivals — the EPYC 7H12, Core i5-12450H, Ryzen 3 PRO 8300G, and Core Ultra 7 164U — all score within 0.6% of each other, meaning the i5-11400F is effectively interchangeable with these parts for gaming purposes. The 65 W TDP and PCIe Gen 4 support with 20 lanes ensure the RX 9060 can communicate at full bandwidth, though the GPU's PCIe 5.0 x16 interface means it runs at PCIe 4.0 speeds in this configuration, which has no practical impact on gaming performance.

Measured FPS Breakdown

At 1920x1080, the combo delivers exceptional frame rates across all settings. Low settings average 290 FPS, Medium averages 246 FPS with a minimum of 209 and maximum of 282, High averages 213 FPS, and Ultra averages 171 FPS. These numbers mean even the most demanding preset at 1080p exceeds the refresh rate of all but the fastest gaming monitors, making this resolution ideal for competitive play or high-refresh displays. The gap between Low and Ultra is 119 FPS, or 70% higher performance from the lowest settings, which shows the GPU has significant headroom at this resolution.

Moving to 2560x1440, the averages remain strong but show the expected decline. Low settings produce 195 FPS, Medium averages 165 FPS with a minimum of 140 and maximum of 190, High averages 143 FPS, and Ultra averages 115 FPS. The 1440p results are still smooth for most displays, with even Ultra maintaining triple-digit frame rates. The difference between Low and Ultra narrows to 80 FPS, or 70% improvement, identical to the 1080p ratio. The Medium preset's minimum of 140 FPS ensures consistent frame delivery without drops below the 144 Hz threshold many gamers target.

At 3840x2160, the combo starts to show its limits. Low settings average 112 FPS, Medium averages 94 FPS with a minimum of 80 and maximum of 109, High averages 82 FPS, and Ultra averages 66 FPS. While all of these are technically playable, the Ultra preset falls below the 70 FPS threshold that many consider smooth, and the High preset hovers around the 60-80 FPS range typical of mid-range GPU performance. The scaling from 1080p to 4K shows a 61% reduction at Low, 62% at Medium, 62% at High, and 61% at Ultra, confirming consistent GPU-bound behavior irrespective of settings.

The Medium settings rows are the only ones with complete min/max data, providing insight into frame time consistency. At 1080p, the 209 FPS minimum versus 246 average shows a 15% variance, while at 1440p the 140 minimum versus 165 average is also 15%, and at 4K the 80 minimum versus 94 average is 15%. This consistent 15% variance across resolutions indicates stable performance without sudden spikes, which is typical for an Idle game with predictable rendering loads.

FAQ

Q: Can this combo handle 4K gaming in To The Core?

A: Yes, but with caveats. At 4K Ultra, the average FPS is 66, which is playable but close to the edge of smoothness. Dropping to High settings yields 82 FPS, while Low settings produce 112 FPS. For the best 4K experience, the data suggests using High or Medium settings to maintain frame rates above 80 FPS.

Q: Is the Intel Core i5-11400F a bottleneck for the RX 9060 in this game?

A: No, the data indicates the GPU is the limiting factor. The consistent FPS scaling across resolutions — roughly 33% drop from 1080p to 1440p and 43% from 1440p to 4K — shows the RX 9060 is fully utilized. The CPU's 3DMark scores (5619 at 16 threads) and Passmark multithread score of 16908 demonstrate sufficient processing power to feed the GPU.

Q: What is the best settings preset for 1440p gaming?

A: For 1440p, the Ultra preset averages 115 FPS, which is smooth for most displays. The High preset at 143 FPS offers a 24% improvement over Ultra, while Medium at 165 FPS provides 43% more performance than Ultra. The data shows that even Ultra is playable, but High or Medium offer better frame rates with likely minimal visual differences in an Idle game.

Q: How does this combo compare to similar hardware in the database?

A: The combo ranks 1719 out of 2991 tested combinations. The CPU's nearest rivals — including the AMD EPYC 7H12 and Intel Core i5-12450H — score within 0.6% of the i5-11400F, making them interchangeable. The GPU's nearest rival, the NVIDIA GeForce RTX 3060 Ti, scores just 0.7% higher, suggesting similar overall performance.

Q: Does lowering settings from Ultra to Low provide a significant FPS boost?

A: Yes, the improvement is substantial. At 1080p, Low settings deliver 290 FPS versus 171 FPS at Ultra, a 70% increase. At 1440p, the gain is 80 FPS (195 vs 115), and at 4K, it's 46 FPS (112 vs 66). This makes Low settings particularly useful for maximizing refresh rates on high-frequency monitors.

Q: Is the 65 W TDP CPU sufficient for this GPU pairing?

A: Yes, the i5-11400F's 65 W TDP is adequate for gaming workloads. The CPU's benchmark scores — Cinebench R23 multicore of 14340 and single-core of 2024 — show it can sustain high clocks under load, and the measured FPS data confirms no CPU-related performance drops even at 1080p where frame rates exceed 200 FPS.

Settings Recommendations

The measured data provides clear guidance on which settings preset offers the best experience depending on resolution and performance priorities. For 1080p, the Ultra preset at 171 FPS is the recommended choice for most users, as it exceeds the refresh rate of 144 Hz monitors and provides the best visual quality. If targeting a 240 Hz display, the High preset at 213 FPS or Medium at 246 FPS would be more appropriate, with Low at 290 FPS reserved for maximum competitive advantage.

At 1440p, the Ultra preset at 115 FPS is the best balance of visual fidelity and smoothness for users with 120 Hz displays, while the High preset at 143 FPS suits 144 Hz monitors. The Medium preset at 165 FPS offers the highest frame rates without sacrificing too much quality, making it the recommended choice for users with 165 Hz or higher refresh rate displays. The Low preset at 195 FPS is excessive for most 1440p monitors but useful for those with 200 Hz+ panels.

At 4K, the recommendations shift toward lower settings to maintain playable frame rates. The Ultra preset at 66 FPS is acceptable for cinematic games but may feel sluggish for action sequences. The High preset at 82 FPS offers a 24% improvement and is the recommended choice for 60 Hz displays. The Medium preset at 94 FPS provides the best balance for 4K, delivering smooth performance that exceeds 60 FPS comfortably. The Low preset at 112 FPS is recommended for users with 100 Hz+ 4K displays, though the visual compromise may be significant.

The data's consistent 15% variance between average and minimum FPS on Medium settings across all resolutions suggests this preset offers the most stable frame pacing, making it a safe choice for users who prioritize consistency over maximum frame rates. For users with adaptive sync displays, the High preset at 4K (82 FPS) and Ultra at 1440p (115 FPS) provide good headroom above typical refresh rate thresholds, ensuring smooth operation without excessive GPU load. The Ultra preset at 1080p (171 FPS) remains the best overall choice for the majority of users, as it combines high visual quality with frame rates that exceed all but the most extreme refresh rate displays.

Hardware Specifications

Intel Core i5-11400F

Cores / Threads 6 / 12
Base Clock 2600 MHz
Boost Clock 4400 MHz
TDP 65W
Socket Intel Socket 1200
View Full CPU Details →

AMD Radeon RX 9060

VRAM 8 GB GDDR6
Base Clock —
Boost Clock 2990 MHz MHz
TDP 132 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core i5-11400F + AMD Radeon RX 9060 in To The Core

Resolution Settings Avg FPS
3840x2160 Low 112.0
3840x2160 Medium 94.0
3840x2160 High 82.0
3840x2160 Ultra 66.0
2560x1440 Low 195.0
2560x1440 Medium 165.0
2560x1440 High 143.0
2560x1440 Ultra 115.0
1920x1080 Low 290.0
1920x1080 Medium 246.0
1920x1080 High 213.0
1920x1080 Ultra 171.0

To The Core with ii5-11400F + Other GPUs

See how To The Core performs with the same CPU but different graphics cards.

To The Core with RX 9060 + Other CPUs

See how To The Core performs with the same GPU but different processors.

Other Games with ii5-11400F + RX 9060

Explore FPS benchmarks for other games using this same hardware combination.