To The Core
This combination delivers exceptional performance with an average of 343 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 143 | 177 | 203 | 244 |
| 1440p QHD | 251 | 311 | 360 | 427 |
| 1080p Full HD | 372 | 465 | 535 | 633 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
To The Core with AMD Ryzen 5 9600X + NVIDIA GeForce RTX 5090, In-Depth Analysis
The AMD Ryzen 5 9600X paired with the NVIDIA GeForce RTX 5090 delivers exceptional frame rates in To The Core, an Idle genre title. The data shows a system that is overwhelmingly GPU-bound at lower resolutions, with the CPU’s 6-core/12-thread configuration proving more than sufficient to feed one of the fastest consumer graphics cards available. This analysis breaks down the measured performance across resolutions, settings, and the underlying hardware characteristics.
Resolution Scaling
The performance scaling from 1080p to 4K reveals a classic GPU-bound scenario, particularly at lower graphical presets. At 1080p with Low settings, the combo achieves 632.7 FPS. Moving to 1440p Low drops this to 426.8 FPS, a reduction of approximately 32.5%. At 4K Low, the frame rate falls further to 243.6 FPS, which is a 61.5% decrease from the 1080p figure. This steep decline as resolution increases is the hallmark of a system where the RTX 5090’s rendering load is the primary constraint; the CPU is not the bottleneck at these settings.
However, the scaling pattern shifts when the graphical preset is raised. At Ultra settings, the frame rates are 372 FPS at 1080p, 250.7 FPS at 1440p, and 142.9 FPS at 4K. The percentage drop from 1080p to 4K at Ultra is 61.6%, nearly identical to the Low preset’s drop. Yet the absolute values are much lower, indicating that the increased shading, texture, and effects workload of Ultra settings places a heavier burden on the GPU’s compute units, which scales directly with pixel count. The data suggests that the RTX 5090’s raw throughput is the limiting factor across all tested configurations, as even at 1080p Ultra, the CPU is not holding the system back from exceeding 370 FPS.
Interestingly, the scaling from 1440p to 4K is steeper than from 1080p to 1440p. For High settings, 1440p yields 311.1 FPS while 4K yields 176.7 FPS, a 43.2% reduction. In contrast, moving from 1080p High (464.8 FPS) to 1440p High (311.1 FPS) is a 33.1% reduction. This non-linear scaling is expected, as 4K contains 2.25 times the pixels of 1440p, whereas 1440p contains 1.78 times the pixels of 1080p. The benchmark results align with this geometric progression, confirming that the GPU’s pixel processing rate is the dominant variable in To The Core.
How This Combo Ranks
Within the database of tested combinations, this specific CPU-GPU pairing achieves a combo rank of 14 out of 1756 combos. This places it in the top 0.8% of all tested systems for To The Core, a remarkable position that underscores the synergy between the Ryzen 5 9600X and the RTX 5090. The rank reflects that only 13 other combinations of processors and graphics cards deliver higher average frame rates in this specific title.
The CPU’s individual benchmark percentile is 85, meaning it outperforms 85% of all tested CPUs across a broad suite of tests. Its average benchmark score is 28,246. This score places it in close competition with several rivals: the Intel Core i5-13490F (28,173, a 0.3% difference), the AMD Ryzen 5 230 (28,164, a 0.3% difference), the AMD Ryzen 7 8845HS (28,369, a -0.4% difference), and the Intel Core i5-14500T (28,377, a -0.5% difference). The delta percentages are all within a fraction of a percent, indicating that the 9600X’s processing power is statistically equivalent to these other models for general workloads.
For the GPU, the RTX 5090 sits in the 94th percentile of all tested GPUs, with an average benchmark score of 84,306. Its nearest rivals include the NVIDIA GeForce RTX 5090 D (84,241, 0.1% higher), the NVIDIA GeForce RTX 5050 Mobile (84,171, 0.2% higher), the AMD Radeon PRO W6600 (83,209, 1.3% higher), and the NVIDIA CMP 40HX (85,637, 1.6% lower). The near-identical scores among the top contenders show that the 5090 is at the very apex of GPU performance, and its 94th percentile ranking confirms that only a handful of specialized or newer cards surpass it. The combo’s 14th place finish is therefore a direct consequence of pairing a top-6% GPU with a CPU that, while in the 85th percentile, is more than capable of keeping up in this idle-genre title.
FAQ
Q: What is the highest average frame rate recorded for this combo?
A: The highest recorded average frame rate is 632.7 FPS, achieved at 1920x1080 resolution with Low settings.
Q: How does the CPU’s performance compare to its nearest rival, the Intel Core i5-13490F?
A: The AMD Ryzen 5 9600X has an average benchmark score of 28,246, which is 0.3% higher than the Intel Core i5-13490F’s score of 28,173. This indicates a negligible performance difference between the two processors in synthetic benchmarks.
Q: Does the RTX 5090 face stiff competition from other GPUs in its class?
A: The data shows the RTX 5090’s average benchmark score is 84,306. Its closest rival, the NVIDIA CMP 40HX, scores 85,637, which is 1.6% higher. Other rivals like the RTX 5090 D and RTX 5050 Mobile are within 0.2% of its score, indicating a very tight grouping at the top.
Q: What is the frame rate difference between 1080p and 4K at Medium settings?
A: At Medium settings, the combo produces 535.1 FPS at 1080p and 203.4 FPS at 4K. This represents a reduction of 331.7 FPS, or approximately 62% lower performance when moving to the higher resolution.
Q: Is the Ryzen 5 9600X considered a high-performance processor relative to all tested CPUs?
A: Yes, the Ryzen 5 9600X has a percentile ranking of 85 against all CPUs in the database, meaning it performs better than 85% of all processors that have been benchmarked.
Q: How many total combinations does the rank of 14 come from?
A: The combo ranks 14th out of a total of 1,756 tested combinations for To The Core.
Settings Recommendations
Based on the measured frame rates, the optimal settings depend heavily on the user’s display refresh rate and resolution preference. At 4K, the Ultra preset delivers 142.9 FPS, which is still exceptionally smooth for most displays, while High delivers 176.7 FPS. Given the minimal visual difference between High and Ultra in many titles, High at 4K offers a better balance of fidelity and headroom, providing a 23.7% performance increase over Ultra. For users with 144Hz displays, even the 4K Ultra setting exceeds the refresh rate, but High ensures that frame times remain consistently above typical VRR thresholds.
At 1440p, all presets are extremely fast. The Low preset hits 426.8 FPS, Medium reaches 359.7 FPS, and High achieves 311.1 FPS. Even Ultra manages 250.7 FPS. The recommendation here is to use Ultra, as the frame rate remains above 240 FPS, which is sufficient for the fastest gaming monitors. The CPU’s 6-core/12-thread design shows no signs of being a limiting factor, as the GPU is fully utilized to produce these high numbers.
At 1080p, the situation is similar but with even more headroom. Ultra produces 372 FPS, while High yields 464.8 FPS. The Low preset’s 632.7 FPS is far beyond what any current display can show, making it a pointless setting for actual play. The best experience at 1080p is to use Ultra, as the 372 FPS result still far exceeds all display capabilities, and the visual quality improvements are essentially free. In all cases, the data indicates that the RTX 5090 is the performance ceiling, and the Ryzen 5 9600X provides ample processing power to avoid introducing any CPU-side bottlenecks.
Measured FPS Breakdown
The complete set of measured average FPS values shows a consistent pattern across all settings. At 1920x1080, the results are: Low 632.7 FPS, Medium 535.1 FPS, High 464.8 FPS, and Ultra 372 FPS. The progression from Low to Ultra reduces performance by 41.2%, reflecting the increasing computational load of higher graphical presets.
At 2560x1440, the frame rates are: Low 426.8 FPS, Medium 359.7 FPS, High 311.1 FPS, and Ultra 250.7 FPS. The spread from Low to Ultra is 41.3%, nearly identical to the 1080p spread. This consistency suggests that the relative cost of each preset tier is uniform regardless of resolution.
At 3840x2160, the results are: Low 243.6 FPS, Medium 203.4 FPS, High 176.7 FPS, and Ultra 142.9 FPS. The Low-to-Ultra drop is 41.3% as well. This uniformity across all three resolutions is a strong indicator that the game’s settings apply a multiplicative scaling factor to the GPU workload, rather than adding a fixed cost. The absolute numbers confirm that even the most demanding configuration (4K Ultra) produces a playable frame rate above 140 FPS, making this combo a top-tier performer for To The Core.
CPU Role
The AMD Ryzen 5 9600X is a 6-core, 12-thread processor based on the Zen 5 architecture, codenamed Granite Ridge. It operates with a base clock of 3.90 GHz and a boost clock of 5.40 GHz. This high boost clock is critical for gaming performance, as it allows the processor to rapidly execute single-threaded tasks that are common in game logic and physics. The CPU’s cache hierarchy includes 80 KB of L1 per core, 1 MB of L2 per core, and 32 MB of shared L3 cache, which helps reduce latency when accessing frequently used data.
In the context of To The Core, an Idle genre game, the CPU’s role is less about brute-force multi-core throughput and more about maintaining high single-thread responsiveness. The 9600X’s single-thread benchmark scores are strong, with a geekbench single-core score of 3,363 and a cinebench r23 single-core score of 3,603. These scores indicate that the CPU can handle the game’s simulation and UI rendering without becoming a bottleneck. The multi-threaded performance, evidenced by a cinebench r23 multi-core score of 25,525, is also robust, but the game likely does not scale perfectly across all 12 threads.
The CPU’s 65W TDP and 4nm process node from TSMC mean it runs efficiently, producing less heat that could impact sustained boost clocks. With a memory bandwidth of 89.6 GB/s on a dual-channel DDR5 interface, the CPU can feed data to the GPU at a sufficient rate for the frame rates observed. The benchmark results show no indication of CPU limitation; the scaling from 1080p to 4K is purely a function of GPU rendering load. The Ryzen 5 9600X, with its 85th percentile ranking, provides just enough performance to unlock the full potential of the RTX 5090 in this title, making the combo’s 14th place ranking evidence of the CPU’s efficient architecture rather than its absolute core count.
Hardware Specifications
AMD Ryzen 5 9600X
NVIDIA GeForce RTX 5090
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 9600X + NVIDIA GeForce RTX 5090 in To The Core
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 243.6 |
| 3840x2160 | Medium | 203.4 |
| 3840x2160 | High | 176.7 |
| 3840x2160 | Ultra | 142.9 |
| 2560x1440 | Low | 426.8 |
| 2560x1440 | Medium | 359.7 |
| 2560x1440 | High | 311.1 |
| 2560x1440 | Ultra | 250.7 |
| 1920x1080 | Low | 632.7 |
| 1920x1080 | Medium | 535.1 |
| 1920x1080 | High | 464.8 |
| 1920x1080 | Ultra | 372.0 |
To The Core with Ryzen 5 9600X + Other GPUs
See how To The Core performs with the same CPU but different graphics cards.
To The Core with RTX 5090 + Other CPUs
See how To The Core performs with the same GPU but different processors.
Other Games with Ryzen 5 9600X + RTX 5090
Explore FPS benchmarks for other games using this same hardware combination.