To The Core

The AMD Ryzen 5 7500F paired with the NVIDIA GeForce RTX 2060 delivers a performance profile in To The Core that is defined by the CPU’s exceptional headroom and the GPU’s role as the primary scaling bottleneck. Across the measured data, this combo achieves playable to highly fluid frame rates at every tested setting, with the strongest results at 1080p where the RTX 2060’s 6 GB of GDDR6 memory and 336.0 GB/s bandwidth are sufficient to push past 200 FPS on medium settings. The pairing ranks 1447th out of 1756 tested combos, placing it in the lower-middle tier of the database, yet the actual FPS figures reveal a system that can comfortably handle the game’s demands, particularly when settings are tuned to balance load.

FAQ

Q: What is the average FPS at 1080p with Ultra settings?

A: The measured average frame rate at 1920x1080 with Ultra settings is 144 FPS, which is the lowest result at that resolution but still well above the 60 FPS threshold for smooth gameplay.

Q: How does the CPU’s multi-threaded performance compare to its nearest rivals?

A: The Ryzen 5 7500F’s average benchmark score of 24993 is 0.1% higher than the Intel Core i7-11850H and 0.4% higher than the AMD Ryzen 9 6900HX, while being 0.3% lower than both the AMD Ryzen 7 2700X and AMD Ryzen 5 8400F.

Q: What is the GPU’s VRAM capacity and memory bandwidth?

A: The NVIDIA GeForce RTX 2060 features 6 GB of GDDR6 memory on a 192-bit bus, providing a memory bandwidth of 336.0 GB/s, which is sufficient for the game’s settings at 1080p and 1440p.

Q: What is the best measured FPS result for this combo?

A: The highest average FPS recorded is 239.2 FPS, achieved at 1920x1080 with Low settings, showcasing the system’s ability to deliver very high frame rates when graphical load is minimized.

Q: How does the combo rank among all tested configurations?

A: This combo ranks 1447th out of 1756 tested combos in To The Core, indicating it sits in the lower half of the performance distribution, though the measured FPS suggests it is more than adequate for this title.

Q: What is the FPS drop from 1080p to 4K at High settings?

A: At High settings, the average FPS drops from 176.6 at 1920x1080 to 65.3 at 3840x2160, a reduction of 111.3 FPS, which demonstrates the significant impact of resolution on the GPU’s workload.

CPU Role

The AMD Ryzen 5 7500F is a 6-core, 12-thread processor based on the Zen 4 architecture, with a base clock of 3.70 GHz and a boost clock of 5.00 GHz. In To The Core, an idle genre game, the CPU’s role is to maintain a stable frame delivery pipeline, and the data suggests it excels at this task. The processor’s single-thread performance, evidenced by a 3DMark single-thread score of 974 and a Cinebench R23 single-core score of 3218, is critical for handling game logic and frame pacing, which is reflected in the high average FPS numbers even at lower resolutions where the CPU is more likely to be the limiting factor.

The 7500F’s multi-threaded capabilities, such as a Geekbench multicore score of 12686 and a Passmark multithread score of 26825, ensure that background tasks do not interfere with gameplay. Its 32 MB of shared L3 cache and 83.2 GB/s memory bandwidth provide ample data throughput for the game’s demands. The CPU’s percentile ranking of 82 among all CPUs indicates it outperforms the vast majority of processors in general benchmarks, and its nearest rivals, including the Intel Core i7-11850H and AMD Ryzen 9 6900HX, are all within a 0.4% delta of its average score, confirming that the 7500F is a top-tier performer in its class.

At 1080p, the CPU’s influence is most apparent. The jump from 144 FPS at Ultra to 239.2 FPS at Low settings suggests that the CPU can feed frames faster than the GPU can render them when graphics settings are reduced. The 7500F’s high boost clock of 5.00 GHz ensures that single-threaded tasks are executed with minimal latency, which is essential for maintaining the high frame rates seen in the measured data. The processor’s 65 W TDP and 5 nm process node from TSMC also indicate efficient operation, allowing sustained performance without thermal throttling that could affect frame times.

GPU Role

The NVIDIA GeForce RTX 2060 is the primary component determining graphical fidelity in this combo, and its 6 GB of GDDR6 memory is a key factor in the measured results. With a memory bandwidth of 336.0 GB/s and a 192-bit bus width, the GPU can handle texture streaming and frame buffer operations effectively at 1080p and 1440p. The GPU’s boost clock of 1680 MHz and base clock of 1365 MHz provide a solid foundation for rendering, while its 1920 shading units and 120 texture mapping units process the graphical data.

The RTX 2060’s performance in To The Core is characterized by a clear scaling pattern tied to resolution. At 1080p, the GPU delivers 176.6 FPS on High settings, which drops to 121.8 FPS at 1440p and 65.3 FPS at 4K. This indicates that the GPU becomes increasingly stressed as resolution increases, with the 4K results showing a significant performance penalty. The GPU’s percentile rank of 58 among all GPUs places it in the mid-range, and its average benchmark score of 16074 is only 0.5% higher than the AMD Radeon RX 7600S and 1.8% higher than the AMD Radeon Pro W5500, showing that it is competitive with other mid-range options.

The VRAM capacity of 6 GB is a potential limiting factor at higher resolutions and settings. At 4K Ultra, the average FPS drops to 55.3, which is the lowest measured result and suggests that the GPU is struggling to maintain performance with the increased memory demands. The GPU’s 12 nm process node and 160 W TDP indicate it is a power-hungry component, but its performance in this idle game is more than sufficient for 1080p and 1440p gaming. The data shows that the RTX 2060 is the bottleneck in this system, as the CPU is clearly capable of higher frame rates, evidenced by the FPS differences between low and ultra settings at the same resolution.

How This Combo Ranks

The combo of the Ryzen 5 7500F and RTX 2060 ranks 1447th out of 1756 tested combinations in To The Core, placing it in the 18th percentile of all tested systems. This ranking might suggest a weak performer, but the measured FPS data tells a different story. The low rank is likely due to the GPU’s mid-range status, as the RTX 2060’s percentile of 58 among all GPUs is significantly lower than the CPU’s percentile of 82. The combination of a high-performing CPU with a mid-range GPU creates an imbalance where the GPU is the limiting factor.

In the context of the full database, this combo sits below the median, but the actual gameplay experience is far from poor. At 1080p, the system delivers over 144 FPS at Ultra settings, which is competitive with many higher-ranked configurations. The rank of 1447 is more reflective of the GPU’s limited capacity for 4K rendering, where the combo produces 65.3 FPS at High settings and 55.3 FPS at Ultra, numbers that are below average for top-tier systems. The CPU’s strength is evident in the consistency of frame rates across settings, but the GPU’s 6 GB VRAM and 12 nm architecture prevent the combo from achieving higher ranks.

The deltaPct values for the CPU and GPU’s nearest rivals show that both components are closely matched with their peers. The CPU’s average score is nearly identical to the Intel Core i7-11850H and AMD Ryzen 7 2700X, while the GPU is within 1.8% of the AMD Radeon Pro W5500. This indicates that the combo’s rank is not due to any single component being a poor performer, but rather the combination of a high-end CPU with a mid-range GPU that limits overall system potential in a game that scales heavily with GPU load at higher resolutions.

Measured FPS Breakdown

The measured FPS data provides a comprehensive view of the combo’s performance across three resolutions and four settings presets. At 1920x1080, the system achieves its highest frame rates, with an average of 239.2 FPS at Low settings, 201.7 FPS at Medium, 176.6 FPS at High, and 144 FPS at Ultra. These numbers indicate that the combo is well-suited for high-refresh-rate monitors at 1080p, with even the most demanding settings providing a smooth experience.

Moving to 2560x1440, the average FPS drops across all settings, but remains highly playable. The system delivers 160.1 FPS at Low, 135.9 FPS at Medium, 121.8 FPS at High, and 92.4 FPS at Ultra. The 1440p results show a more pronounced difference between Low and Ultra settings, with a 67.7 FPS gap, indicating that the GPU is becoming a more significant bottleneck as resolution increases. At 3840x2160, the performance degrades further, with average FPS of 92.5 at Low, 80.8 at Medium, 65.3 at High, and 55.3 at Ultra. The 4K results are the weakest, but even the lowest recorded FPS of 55.3 is above the 30 FPS threshold for basic playability, though it may not be ideal for fast-paced action.

The data reveals a consistent pattern: the combo excels at 1080p, delivers solid performance at 1440p, and struggles at 4K. The FPS drops from 1080p to 4K are substantial, with the High setting showing a 111.3 FPS reduction, which is a 63% decrease. This pattern confirms that the RTX 2060 is the primary limiting factor, as the CPU’s performance headroom is not fully utilized at higher resolutions.

Settings Recommendations

Based on the measured FPS data, the optimal settings for this combo depend on the target resolution and desired frame rate. At 1920x1080, the Ultra preset delivers 144 FPS, which is excellent for most users, but the High preset at 176.6 FPS offers a better balance of visual quality and performance. For users with high-refresh-rate monitors (144Hz or higher), the Medium preset at 201.7 FPS is the recommended choice, as it provides a significant FPS boost over High while maintaining acceptable visual fidelity. The Low preset at 239.2 FPS is only recommended for competitive play where maximum frame rate is prioritized over visuals.

At 2560x1440, the High preset at 121.8 FPS is the best overall choice, offering a smooth experience that is well above the 60 FPS threshold. The Ultra preset at 92.4 FPS is also viable for users who prioritize visual quality, but the Medium preset at 135.9 FPS is a better option for those seeking higher frame rates. For 3840x2160, the Medium preset at 80.8 FPS is the recommended setting, as it provides a playable frame rate while maintaining a reasonable level of graphical detail. The High preset at 65.3 FPS is acceptable, but the Ultra preset at 55.3 FPS should be avoided due to the risk of frame rate drops below 60 FPS.

The data suggests that the combo is best utilized at 1080p or 1440p, where the GPU can deliver high frame rates without being overly stressed. At 4K, users should stick to Medium or High settings to ensure a consistent experience. The measured results show that the system offers the best balance of performance and quality at 1440p High, which is the recommended configuration for most users.

Resolution Scaling

The FPS scaling from 1080p to 4K is steep, and the data reveals a clear pattern of GPU limitation. At Low settings, the average FPS drops from 239.2 at 1080p to 160.1 at 1440p and 92.5 at 4K, representing a 61.3% reduction from 1080p to 4K. At Ultra settings, the drop is from 144 FPS to 92.4 FPS to 55.3 FPS, a 61.6% reduction. This consistent percentage drop across settings indicates that the GPU is the bottleneck, as the CPU’s performance does not scale with resolution.

The RTX 2060’s 6 GB VRAM and 336.0 GB/s bandwidth are likely the limiting factors at higher resolutions, as the increased pixel count demands more memory and bandwidth. The GPU’s 12 nm process node and 1920 shading units are also insufficient for 4K rendering, as evidenced by the sub-60 FPS results at Ultra. The CPU, on the other hand, shows no signs of limitation, as the FPS drops are proportional to the GPU workload increase.

The scaling behavior suggests that the combo is best suited for 1080p and 1440p gaming, where the GPU can maintain high frame rates. At 4K, the system is clearly GPU-bound, and the FPS results indicate that the RTX 2060 is not capable of delivering a consistently smooth experience at that resolution, even at Low settings. The data confirms that the Ryzen 5 7500F is not the limiting component, as its performance headroom is evident in the 1080p results, where the CPU can push the GPU to its maximum output.