To The Core
This combination delivers exceptional performance with an average of 293 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 144 | 178 | 204 | 246 |
| 1440p QHD | 253 | 315 | 335 | 357 |
| 1080p Full HD | 335 | 365 | 382 | 407 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
To The Core with AMD Ryzen 5 4600G + NVIDIA GeForce RTX 5090, In-Depth Analysis
The pairing of AMD’s Ryzen 5 4600G with NVIDIA’s GeForce RTX 5090 presents a striking study in system balance, particularly within the context of an idle game like To The Core. The measured frames per second (FPS) data reveals a configuration that is overwhelmingly GPU-bound at lower resolutions, yet shows the CPU’s influence tightening as the resolution and graphical load increase. This analysis breaks down the benchmark results, focusing on how the components interact across the tested spectrum.
Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component
The FPS deltas across resolutions tell a clear story of where the bottleneck lies. At the High preset, moving from 1920x1080 to 2560x1440 sees a drop from 364.5 FPS to 314.9 FPS, a reduction of roughly 13.6%. Pushing further to 3840x2160 yields 177.5 FPS, a 51.3% decrease from the 1440p figure. This pattern is consistent across all settings. For instance, at Ultra, the decline is from 335.2 FPS at 1080p, to 253.4 FPS at 1440p, and finally to 143.7 FPS at 4K. The massive leap in pixel count from 1440p to 4K (over double the pixels) results in a performance hit that is far more severe than the step from 1080p to 1440p.
This scaling behavior is the classic signature of a system where the GPU is the primary limiting factor at high resolutions. The RTX 5090, with its 1.79 TB/s of memory bandwidth and 104.8 TFLOPS of FP32 compute, is being fed an enormous amount of data. The fact that the FPS at 4K High (177.5) is still exceptionally high for most titles indicates the sheer headroom of the graphics card. However, the data also hints that the Ryzen 5 4600G, despite being a 6-core/12-thread part, is not holding the system back at 1080p. The 406.9 FPS at 1080p Low suggests a point where the CPU’s single-thread performance, which scores 1919 in Cinebench R23, might begin to cap the frame rate if the GPU were even more powerful. The scaling from 1080p to 1440p is comparatively modest, suggesting that at 1080p, the system is approaching a CPU-imposed limit in some scenarios, while the 4K results are purely a function of the GPU's rendering capability.
GPU Role — VRAM, clocks, and how they relate to this game's results
The RTX 5090’s specifications are monumental, and the benchmark results reflect this. Its 32 GB of GDDR7 memory on a 512-bit bus provides a bandwidth of 1.79 TB/s. For a game like To The Core, which is an idle genre title, the data footprint is likely small, meaning the VRAM is not a constraining factor. The massive frame rates observed, even at 4K Ultra (143.7 FPS), are a direct result of the GPU’s raw compute power. The boost clock of 2407 MHz across its 21,760 shading units allows for immense parallel processing.
The difference between the Low and Ultra presets at 4K is telling: 245.5 FPS vs 143.7 FPS. This 41% performance gap highlights how the GPU’s workload scales with graphical complexity. The GPU is clearly the dominant component in this pairing; its performance percentile of 94 vs all GPUs places it far above the 75th percentile of the CPU. The data suggests that for this specific title, the GPU is operating well within its capabilities, never being fully stressed to its limit, even at the highest settings. The game’s simple geometry and effects are no match for the sheer processing throughput of the Blackwell architecture, leaving the GPU to deliver frame rates that would be considered exceptional for far more demanding titles.
FAQ — 4-6 Q&A pairs answerable from FACT PACK data
*Q: What is the maximum average FPS recorded for this combo in To The Core?*
A: The highest average FPS is 406.9, achieved at 1920x1080 resolution with the Low settings preset.
Q: How does the performance at 4K Ultra compare to 1080p Low?
A: The frame rate drops significantly. At 4K Ultra, the average FPS is 143.7, while at 1080p Low, it is 406.9. This represents a 263.2 FPS difference, showing the impact of both resolution and graphical fidelity on the GPU.
Q: Is the difference between Medium and High settings more pronounced at 1440p or 4K?
A: The absolute FPS difference is larger at 1440p. At 2560x1440, the gap is 20.4 FPS (335.3 vs 314.9). At 3840x2160, the gap narrows to 26.8 FPS (204.3 vs 177.5). The relative percentage drop is similar, but the raw FPS cost is higher at 1440p.
Q: Does the CPU's performance percentile suggest it is a bottleneck for this GPU?
A: The CPU is in the 75th percentile of all CPUs, while the GPU is in the 94th percentile. This large gap in relative standing suggests the CPU is the weaker link, though the FPS data shows it is sufficient to drive the GPU to very high frame rates in this game.
Q: At which resolution does the FPS drop most severely?
A: The most severe drop occurs when moving from 2560x1440 to 3840x2160. For example, on the High preset, the FPS falls from 314.9 to 177.5, a reduction of 137.4 FPS, which is a much larger absolute decline than the step from 1080p to 1440p.
Q: What is the combo's overall rank among all tested combinations?
A: The combination of the Ryzen 5 4600G and RTX 5090 ranks 135th out of 1756 tested combos for To The Core.
Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers
At 1920x1080, the data shows the following average FPS: Low settings yields 406.9 FPS, Medium yields 381.5 FPS, High yields 364.5 FPS, and Ultra yields 335.2 FPS. The progression from Low to Ultra costs 71.7 FPS, indicating a scaling of about 17.6% from the maximum.
Moving to 2560x1440, the scores compress slightly. The Low preset delivers 357.1 FPS. Medium settings follow closely at 335.3 FPS. The High preset reduces performance to 314.9 FPS. At the top end, the Ultra preset achieves 253.4 FPS. The difference between the lowest and highest settings is 103.7 FPS.
At the demanding 3840x2160 resolution, the frame rates remain high but show a larger spread. The Low preset leads with 245.5 FPS. The Medium preset follows at 204.3 FPS. The High preset drops to 177.5 FPS. The Ultra preset, the most demanding, still manages an average of 143.7 FPS. Here, the total cost of switching from Low to Ultra is 101.8 FPS.
Across all resolutions, the gap between Medium and High is consistently smaller than the gap between High and Ultra, suggesting that the Ultra preset includes a disproportionately expensive set of visual effects. The data confirms that even at the most demanding settings and resolution, this combination remains highly playable.
Settings Recommendations — which preset gives the best experience per the measured rows
For a game like To The Core, where the core loop is about progression and numbers rather than twitch reaction times, the pursuit of maximum frame rate is less critical than visual clarity. The data shows that the High preset at 2560x1440 offers a spectacular balance, delivering 314.9 FPS. This is a 61.5 FPS improvement over the Ultra preset at the same resolution, while still providing a significant visual upgrade over Medium. The jump from Medium to High costs only 20.4 FPS, a small price for the added fidelity.
At 4K, the High preset is the recommended sweet spot. It provides 177.5 FPS, which is 33.8 FPS more than the Ultra preset (143.7 FPS). The difference between High and Ultra in terms of visual quality is often imperceptible in idle games, but the performance gain is substantial. Choosing Medium at 4K yields 204.3 FPS, but the visual drop from High may be more noticeable. Therefore, the data suggests that High settings at either 1440p or 4K provide the optimal experience, offering high fidelity without sacrificing the fluidity that high refresh rate displays can take advantage of. The Ultra preset, while playable, offers diminishing returns for the FPS cost.
CPU Role — cores, clocks, and how they relate to this game's results
The AMD Ryzen 5 4600G, with its 6 cores and 12 threads based on the Zen 2 architecture, shows its age in this extreme pairing. Its base clock of 3.70 GHz and boost clock of 4.20 GHz are modest by current standards. In To The Core, an idle game, the computational demands are likely low, but the high frame rates achieved mean the CPU must process a significant number of draw calls and game logic updates per second. The CPU's benchmark scores, such as 13593 in Cinebench R23 multicore and 1919 in single-core, are respectable but place it in the 75th percentile of all CPUs.
The FPS data implies that the CPU is sufficient to feed the RTX 5090 at 1080p, evidenced by the 406.9 FPS result. However, the scaling from 1080p to 1440p is less severe than from 1440p to 4K, which suggests that at lower resolutions, the CPU is beginning to limit the maximum achievable frame rate. If the GPU were even faster, or if the resolution were lower, the 4600G would likely become the primary bottleneck. The 8 MB of shared L3 cache and dual-channel DDR4 memory support are adequate, but they don't provide the same headroom as more modern platforms. The CPU's role is to keep up with the GPU, and while it does so successfully, the data suggests it is the component holding the system back from even more extreme frame rates.
How This Combo Ranks — use comboRankInGame vs other tested combos
The combination of the Ryzen 5 4600G and the RTX 5090 has been measured to rank 135th out of 1756 tested combinations for To The Core. This places it in the top 7.7% of all systems tested. This is a strong result, but it is not at the very top. The ranking suggests that while the GPU is a top-tier performer, the CPU holds the overall system back from competing with combos featuring more modern processors. The CPU's nearest rivals, such as the Intel Core i5-12450H with a 0.1% higher average benchmark score, illustrate that the 4600G is competitive with other mid-range options, but it is not a flagship part.
The high rank is primarily attributable to the RTX 5090's dominance. The GPU's own ranking is 94th percentile, and its nearest rival, the RTX 5090 D, is only 0.1% behind in average score. This indicates that the graphics card is performing as expected at the top of its class. The combo's position at 135th, rather than higher, is a direct consequence of the CPU's lower relative standing. The data implies that pairing this GPU with a higher-performing CPU would yield a significantly better rank, as the GPU has proven it can deliver over 400 FPS when the rest of the system allows it. This combo confirms the GPU's power, but it also serves as a clear example of how a mid-range CPU can cap the potential of a flagship graphics card.
Hardware Specifications
AMD Ryzen 5 4600G
NVIDIA GeForce RTX 5090
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 4600G + NVIDIA GeForce RTX 5090 in To The Core
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 245.5 |
| 3840x2160 | Medium | 204.3 |
| 3840x2160 | High | 177.5 |
| 3840x2160 | Ultra | 143.7 |
| 2560x1440 | Low | 357.1 |
| 2560x1440 | Medium | 335.3 |
| 2560x1440 | High | 314.9 |
| 2560x1440 | Ultra | 253.4 |
| 1920x1080 | Low | 406.9 |
| 1920x1080 | Medium | 381.5 |
| 1920x1080 | High | 364.5 |
| 1920x1080 | Ultra | 335.2 |
To The Core with Ryzen 5 4600G + Other GPUs
See how To The Core performs with the same CPU but different graphics cards.
To The Core with RTX 5090 + Other CPUs
See how To The Core performs with the same GPU but different processors.
Other Games with Ryzen 5 4600G + RTX 5090
Explore FPS benchmarks for other games using this same hardware combination.