To The Core

To The Core

AVERAGE FPS
291
excellent

This combination delivers exceptional performance with an average of 291 FPS, perfect for high refresh rate gaming and competitive play.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 151 188 217 256
1440p QHD 265 308 324 344
1080p Full HD 326 352 370 392

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 256
3840x2160 Medium 217
3840x2160 High 188
3840x2160 Ultra 151
2560x1440 Low 344
2560x1440 Medium 324
2560x1440 High 308
2560x1440 Ultra 265
1920x1080 Low 392
1920x1080 Medium 370
1920x1080 High 352
1920x1080 Ultra 326

To The Core with AMD Ryzen 5 3600 + NVIDIA GeForce RTX 5090 D, In-Depth Analysis

To The Core is a 2024 idle game, yet the measured rows in this lookup show this combination of AMD's six-core Ryzen 5 3600 and NVIDIA's GeForce RTX 5090 D is anything but idle. The benchmark set covers 12 settings/resolution pairs, from 1080p Low all the way up to 4K Ultra, and every single row lands in triple-digit frame rates. That places this pairing at combo rank 336 out of 3,725 total tested combos, which puts it in the top 9% of the entire benchmark field.

How This Combo Ranks

The combo's 336th place in a field of 3,725 tested combinations is a strong result for a peripheral used by an idle game. In percentile terms, this build sits above roughly 3,389 other combos, meaning only about one in twelve tested pairings beats it. What stands out is the gap between the CPU and GPU percentiles: the 5060 D is in the 92nd percentile among all rated GPUs, while the Ryzen 5 3600 is in the 71st percentile among all CPUs, a difference of 21 percent positions. The combo's measured performance suggests this pooling is bounded more by the CPU on light resolutions and by the GPU once resolution climbs to 4K, as the next section confirms.

The raw scores reflect the same tendency. The GPU carries an average benchmark score of 10,000+ with a relative. Wait, GPU's avg BenchmarkScore is 77,112; CPU is 17,035. The combination's rank at spot 336 indicates that in this title's workload the heavy graphics chip is able to push the combo high up the list. Compared to neighbors, the Ryzen averages 17,035 against deltaPct of only 0.2% to both rivals, which underlines that the CPU is near a parity point among similar CPUs, while the GPU's 92nd percentile pulls the overall result to the top tier.

GPU Role

The NVIDIA GeForce RTX 5090 D brings demo heavyweight specs to a light game. The card's 32 GB of GDDR7 memory, 512-bit bus, and 1.79 TB/s memory bandwidth are far beyond the needs of an idle title in general, but the measured samples still show the workload scaling by how the frames are produced. Clockwise, the chip runs a base of 2017 MHz with a boost of 2407 MHz, in a Blackwell 2.0 architecture built on 5 nm TSMC. Inside are 21,760 shading units, 680 TMUs, 176 ROPs, 170 RT cores, and 680 tensor cores; the FP32 rate of 104.8 TFLOPS tells the rest of the story.

In the measured rows, at 4K Ultra the card still draws up 151 FPS, 42 frames below the Low-setting 4K result (256), which shows how the GPU loading scales with shaders. But at 1080p the spread narrows dramatically: Low prints 392 and Ultra prints 326, a gap of only 66 frames. That is a sign that the 5090 is not the happening later in the limit at these lower resolutions; the typical FC gap between Low and Ultra is roughly 60-66 FPS, regardless of whether the GPU is at 1080 or 1440, while at 4K the Low‑to‑Ultra difference widens to 155 FPS.

Compared to nearest prod, the 5090 D's 77,112 average score is 1.1% ahead of the AMD Radeon RX 6650M XT, 1.6% behind the Radeon RX 6850M XT, and more than 2% ahead of two Tesla P100 variants — though those are all existing products. The card's memory bandwidth of 1.79TB/s will be overkill for the game's spatial workload, but the Extreme quality settings still peg at 4K 151-256 FPS depending on graphics level. The verdict is simply that VRAM size never becomes a constraint in these samples; the pack 32GB won't be touched by an idle game like this, so the GPU's high scores are mostly carried by shader count rather than storage.

Resolution Scaling

Scaling from 1080p to 1440p to 4K follows consistent patterns in the measured rows, but the drops differ depending on the quality preset. Using High as the anchor: 1080p as produces 352 vs 2560x1440 at 308 vs 4K at 188. The step from 1080 to 1440 costs about 12.5% of original performance (352→308 is a 44-frame difference), while the 1440p to 4K step is far steeper — 308 to 188 is a 120-frame (70%) drop. Since the drop from 1080p to 1440 is modest but the jump to 4K is severe, this matches a GPU that is finally beginning to stress only at 4K.

At Medium settings the same shape: 1080 at 370, 1440 at 324 (12.4% drop), and 3840 at 217 (a 33.0% cut from 1440). Low settings: 392 → 344 → 256; the cuts are 12.2% and then 25.6% respectively. Ultra: 1080 at 326, 1440 at 265, 4K at 151 — a much larger 44% final step. The effect is that Ultra resolution scaling is the harshest at high resolution: Ultra gives 151 vs 326 at 1080p, which is only 46% of that 1080p value. At Medium the 4K result (217) is 58.6% of the 1080p figure (370), so Medium scales noticeably better to 4K.

The implications for component roles: at 1080p all presets stay above 300 FPS, pointing to a CPU or display-refresh ceiling rather than GPU limit; at 1440p they remain between 265-344, while at 4K the FPS falls enough (max 256 in Low, 151 in Ultra) that the GPU's rendering workload becomes the top limiter. In short, resolution scaling shows the GPU is needed to save the ultra-heavy 4K, while 1080p testing can hit 300–400 FPS with either CPU.

FAQ

Q: Where does this CPU+GPU combo place among all tested combos for To The Core?

A: It ranks 336th out of 3725 tested combos, placing it in the top 9% of the entire benchmark field. That is a very strong result for a relatively dated six-core CPU paired with the newest Blackwell flagship.

Q: What is the best 4K setting that still keeps a 200+ FPS average?

A: The 4K Medium row is the only one that still averages 217 FPS, while also recording a 184 FPS minimum and 249 max. 4K High averages 188, once below the 200 threshold. So if you want the 60 enough of it, that is 4K Medium to keep an average above 200 FPS.

Q: How much does the 32 GB of VRAM int matter for To The Core?

A: The RTX 5090 D's 32 GB GDDR7 is never saturated in any of the measured runs, given the game is an idle title. Since even the 4K Ultra row only hits 151 FPS, the memory size is not a bottleneck; what matters are the clocks, shading units, and bandwidth of 1.79 TB/s rather than raw storage.

Q: In performance terms, how does the Ryzen 5 3600 compare to its closest rivals?

A: The 5 3600 has an average score of 17,053 (avg 17,035), with the two rivals — Intel Core i5-11400 and AMD EPYC 7573X — sitting between -0.2% and +0.2% of its score; the i7-1260P is 0.2% higher. So this CPU is effectively on par with those four competitors in prior averaged benchmarks.

Q: Can the CPU hold high FPS in To The Core despite older platform?

A: At 1080p Low it holds 392, and at 4K Low 256 — the CPU-side 3,80/4,2 GHz boost ± 32 MB L3 appears entirely sufficient to feed the 5090 D, since it never fell below 151 even on Ultra 4K.

Q: What resolution gives the smallest performance drop when going to the next one?

A: Stepping from 1080 to 1440p only costs ~12-13% on most settings, while 1440p to 4K costs 33-43%. 1080p to 1440 is the gentle slope, 4K the sharp cliff.

CPU Role

The processor in this combo is a Zen 2 part, the AMD Ryzen 5 3600, launched 2019-07-06 with launch MSRP $199. It packs 6 cores/12 threads on the Matisse design, base/bo wind of 3.60/4.20 GHz, and a 32 MB shared L3 cache. Memory bandwidth is 51.2 GB/s, TDP 65 W. These 2029 numbers yield solid single-thread performance: 3DMark single-thread 696, Cinebench R23 single-core 2124, and PassMark single-thread 2562. Multi-core reaches 3DMark max-threads 4603, Cinebench R23 multi 15,045 and a PassMark multi 17,700. The overall percentile against other CPUs is 71, being within 0.2% of 4 cyan/all in the list.

In To The Core, the CPU involvement is light enough that the Ryzen 5 (3600) does not choke the 50960. The best evidence is 1080p: the FPS stays at 352-392, independent of GPU pres, meaning the CPU can render well over 300 frames, not a min-bottleneck. At 4K Medium the 217 FPS also is not blocked by the 3600, a high single-core IPC from a six-core Zen 2 is ample. The 12 threads ( (6C/12T) and 3rd Gen /Cache keep this build well beyond any necessity for an idle game, even if the CPU's percentile is lower, the game's engine rarely leans on many cores. Note that the combo's overall rank of 336 is the product of the 5090's role lifting the older CPU; a slower GPU would likely put this in a lower category.

Settings Recommendations

The measured data supports a clear hierarchy for "To The Core". If the goal is 4K with high refresh, 4K Medium is the standout row: 217 FPS average with an actual 184 FPS minimum and 249 FPS maximum. When those numbers are your only metric, 4K Low climbs to 256, but Medium loses none of that peace of mind because the min is 184, still far above 60. At Ultra, the 4K average drops to 151, which is 46% lower than the 1080p Ultra of 326; that isn't nothing if your display is 120-165 Hz. So the best balance between eye candy and measured smoothness at 4K is the Medium setting — it delivers the full 1.79 TB/s bandwidth in action.

For 1440p owners, Medium again looks optimal: 324 FPS (with a 275 min and 373 max) vs 344 for Low and 308 for High. At 1440p the heavier "High" setting still reaches 1.4x the compute and loses only 14 frames from "Ultra", but Medium's tolerance is a min of 275 that guarantees no frame drop on a typical 240 Hz monitor. So at 1440p, pick High if you want the better graphics; the data shows 308 vs 265 for Ultra — a negligible 0.4 difference? Actually Ultra yields 265, so High 308 is the highest-fps of the non-Low quality levels at 1440, staying 20+. Also 2560 High

Hardware Specifications

AMD Ryzen 5 3600

Cores / Threads 6 / 12
Base Clock 3600 MHz
Boost Clock 4200 MHz
TDP 65W
Socket AMD Socket AM4
View Full CPU Details →

NVIDIA GeForce RTX 5090 D

VRAM 32 GB GDDR7
Base Clock —
Boost Clock 2407 MHz MHz
TDP 575 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 3600 + NVIDIA GeForce RTX 5090 D in To The Core

Resolution Settings Avg FPS
3840x2160 Low 256.0
3840x2160 Medium 217.0
3840x2160 High 188.0
3840x2160 Ultra 151.0
2560x1440 Low 344.0
2560x1440 Medium 324.0
2560x1440 High 308.0
2560x1440 Ultra 265.0
1920x1080 Low 392.0
1920x1080 Medium 370.0
1920x1080 High 352.0
1920x1080 Ultra 326.0

To The Core with Ryzen 5 3600 + Other GPUs

See how To The Core performs with the same CPU but different graphics cards.

To The Core with RTX 5090 D + Other CPUs

See how To The Core performs with the same GPU but different processors.

Other Games with Ryzen 5 3600 + RTX 5090 D

Explore FPS benchmarks for other games using this same hardware combination.