The Technomancer
This combination offers playable performance with an average of 58 FPS, though you may want to lower settings for smoother gameplay.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 23 | 25 | 33 | 42 |
| 1440p QHD | 41 | 49 | 59 | 76 |
| 1080p Full HD | 62 | 76 | 93 | 118 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
The Technomancer with AMD Ryzen 7 7800X3D + NVIDIA GeForce GTX 1070, In-Depth Analysis
The AMD Ryzen 7 7800X3D paired with the NVIDIA GeForce GTX 1070 delivers a playable experience in The Technomancer, but the data shows that achieving a consistent frame rate requires careful attention to settings. At 1920x1080, the High preset produces an average of 75.8 FPS, which is a solid baseline for smooth gameplay. However, the Medium preset offers 92.6 FPS, a 22% improvement over High, suggesting that the graphical fidelity difference between these two levels is not worth the performance cost. The Low preset reaches 118.3 FPS, but this comes with a significant visual downgrade. For the best balance of visual quality and performance at 1080p, the Medium preset is the recommended choice, as it stays well above the 60 FPS threshold while retaining more detail than Low. At 2560x1440, the High preset averages 49 FPS, which is below the ideal smoothness threshold; dropping to Medium yields 58.9 FPS, still not quite reaching 60. The Low preset at 1440p delivers 75.8 FPS, making it the only 1440p option that consistently exceeds 60 FPS. For 4K, the situation is more constrained: the High preset averages 24.8 FPS, and even the Low preset only manages 41.9 FPS. The data indicates that this combo is not suited for 4K gaming at acceptable quality settings, and users should stick to 1080p Medium for the best overall experience.
GPU Role
The NVIDIA GeForce GTX 1070 is the primary performance limiter in this configuration, as evidenced by its benchmark profile. The GPU’s 8 GB of GDDR5 memory on a 256-bit bus provides a memory bandwidth of 256.3 GB/s, which is adequate for the game’s textures at 1080p and 1440p, but the architecture’s age shows in demanding scenes. The chip operates at a base clock of 1506 MHz and a boost clock of 1683 MHz, with a pixel rate of 107.7 GPixel/s and a texture rate of 202.0 GTexel/s. The FP32 performance is 6.463 TFLOPS, which places it in the mid-range of the database’s GPU rankings, with a percentile of 51 against all GPUs. The measured FPS numbers reflect this: the GPU’s performance scales predictably with resolution and settings, but it cannot maintain high frame rates at 4K. The GTX 1070’s nearest rivals in the database include the NVIDIA Quadro K4200 (0.7% slower), the GeForce GTX 880M (1.3% faster), the GeForce GTX 1650 SUPER (1.4% faster), and the Tesla K20Xm (1.7% faster). These small deltaPct values indicate that the GTX 1070 sits in a tightly packed performance tier, meaning that minor driver or thermal variations could shift its standing. The 8 GB VRAM is sufficient for The Technomancer at 1080p and 1440p, but the 4K results (High: 24.8 FPS, Ultra: 23.4 FPS) show that the GPU’s compute and memory subsystems are overwhelmed at that resolution, regardless of the CPU’s capabilities.
Resolution Scaling
The frame rate drop from 1080p to 4K is steep and reveals the GPU-bound nature of this combo. At 1080p High, the average FPS is 75.8; at 1440p High, it drops to 49 FPS (a 35% reduction); at 4K High, it falls to 24.8 FPS (a 67% reduction from 1080p). This pattern is consistent across all settings. For Low settings, the progression is 118.3 FPS at 1080p, 75.8 FPS at 1440p, and 41.9 FPS at 4K. The Medium preset shows 92.6 FPS at 1080p, 58.9 FPS at 1440p, and 33.4 FPS at 4K. The Ultra preset, which is the most demanding, yields 61.9 FPS at 1080p, 41.1 FPS at 1440p, and 23.4 FPS at 4K. The data indicates that the scaling is nearly linear with the number of pixels, which is characteristic of a GPU-limited scenario. The CPU, an AMD Ryzen 7 7800X3D with 8 cores and 16 threads, has a strong multithreaded profile (Cinebench R23 multicore score of 29149) and a high percentile of 87 against all CPUs, meaning it is unlikely to bottleneck at any of these resolutions. Therefore, the FPS drop is entirely attributable to the GTX 1070’s pixel throughput limits. The gap between 1080p and 1440p is roughly 35-36%, while the gap between 1440p and 4K is roughly 49-50%, which aligns with the pixel count increase. This confirms that users seeking higher resolutions must accept proportionally lower settings, and that 4K is only viable with the Low preset, which still fails to reach 60 FPS.
FAQ
Q: What is the best settings preset for this combo at 1920x1080?
A: The Medium preset provides the best balance, averaging 92.6 FPS. The High preset drops to 75.8 FPS, and Ultra falls to 61.9 FPS, both of which are still playable but offer diminishing returns for the performance cost.
Q: Can this combo handle 2560x1440 gaming?
A: Yes, but only with the Low preset, which averages 75.8 FPS. The Medium preset yields 58.9 FPS, which is close to but below 60 FPS, and High drops to 49 FPS. For a consistent 60+ FPS experience, Low is the only viable option at 1440p.
Q: Is 4K gaming feasible with the GTX 1070 and Ryzen 7 7800X3D?
A: The data shows that 4K is not practical for smooth gameplay. The highest average FPS at 4K is 41.9 FPS on Low settings, and High and Ultra produce 24.8 FPS and 23.4 FPS respectively, which are below the playable threshold.
Q: How does this combo rank against other tested configurations in The Technomancer?
A: This specific combination ranks 1390 out of 1656 tested combos, placing it in the lower 16% of the database. This reflects the GPU’s age and its mid-range percentile of 51 against all GPUs, while the CPU’s high percentile of 87 does not compensate for the GPU bottleneck.
Q: What is the limiting factor for performance in this game?
A: The benchmark results indicate the NVIDIA GeForce GTX 1070 is the limiting component. The FPS drops steeply with resolution (75.8 FPS at 1080p High vs 24.8 FPS at 4K High), which is a classic sign of GPU saturation, while the CPU has ample headroom with its 16 threads and strong Cinebench scores.
Q: How does the GTX 1070 compare to its nearest rivals in the database?
A: The GTX 1070 has an average benchmark score of 12331. Its nearest rival, the NVIDIA Quadro K4200, scores 12241 (0.7% slower), while the GeForce GTX 880M scores 12490 (1.3% faster). The GeForce GTX 1650 SUPER is 1.4% faster with a score of 12504, and the Tesla K20Xm is 1.7% faster with a score of 12547. These differences are minimal, indicating the GTX 1070 performs within a tight band of similar GPUs.
How This Combo Ranks
The combination of the AMD Ryzen 7 7800X3D and the NVIDIA GeForce GTX 1070 achieves a rank of 1390 out of 1656 tested combos in The Technomancer, placing it in the bottom 16% of the database. This low ranking is primarily driven by the GPU’s performance ceiling. The GTX 1070 has an average benchmark score of 12331 and sits at the 51st percentile among all GPUs, meaning it is exactly average in the broader GPU landscape. Its nearest rivals are all within 1.7% of its score, showing that it is not a standout performer in its tier. In contrast, the CPU is a high-end part: the Ryzen 7 7800X3D has an average benchmark score of 31580 and sits at the 87th percentile among all CPUs, with nearest rivals like the Intel Core i7-12700F (0.1% faster), AMD Ryzen 9 5980HX (0.3% faster), and AMD Ryzen 7 8700G (0.6% faster). The stark difference between the CPU’s high percentile and the GPU’s mid-range percentile explains the combo’s poor rank — the processor has headroom to spare, but the graphics card cannot translate that into higher frame rates. The measured FPS data confirms this: the combo achieves 75.8 FPS at 1080p High, which is decent, but the 4K High result of 24.8 FPS is well below the playable threshold. The rank of 1390 out of 1656 indicates that most other combinations deliver better overall performance in this title, likely because they pair the CPU with a more capable GPU. The data suggests that this configuration is a mismatch for The Technomancer, where the GPU’s Pascal architecture and 8 GB of VRAM are insufficient for high-resolution or high-detail play, and users would benefit from upgrading the graphics card to improve the combo’s standing.
Hardware Specifications
AMD Ryzen 7 7800X3D
NVIDIA GeForce GTX 1070
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 7 7800X3D + NVIDIA GeForce GTX 1070 in The Technomancer
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 41.9 |
| 3840x2160 | Medium | 33.4 |
| 3840x2160 | High | 24.8 |
| 3840x2160 | Ultra | 23.4 |
| 2560x1440 | Low | 75.8 |
| 2560x1440 | Medium | 58.9 |
| 2560x1440 | High | 49.0 |
| 2560x1440 | Ultra | 41.1 |
| 1920x1080 | Low | 118.3 |
| 1920x1080 | Medium | 92.6 |
| 1920x1080 | High | 75.8 |
| 1920x1080 | Ultra | 61.9 |
The Technomancer with GTX 1070 + Other CPUs
See how The Technomancer performs with the same GPU but different processors.
Other Games with Ryzen 7 7800X3D + GTX 1070
Explore FPS benchmarks for other games using this same hardware combination.