The Technomancer

The AMD Ryzen 7 5800X and AMD Radeon RX 7600 XT are paired together for The Technomancer, an Action RPG that stresses both components. This combination ranks 2335th out of 3696 tested configurations in the database, meaning it falls below the median performer. Still, the measured frame rates tell a consistent story: the CPU provides plenty of headroom, while the GPU becomes the limiting factor as resolution climbs. The data below explains exactly how these two parts share the load and which setting gives the best playable experience.

CPU Role

The Ryzen 7 5800X is an 8-core, 16-thread desktop processor built on the AMD Zen 3 architecture (Vermeer). It runs a base clock of 3.80 GHz and boosts up to 4.70 GHz, with 32 MB of L3 cache. In the database, the chip holds the 81st percentile among all tested processors, with an average benchmark score of 29,123 points. Its synthetic scores reinforce its multi-threaded strength: the Cinebench R23 multi-core result is 15,476 points, and single-core reaches 1,574.5. In the gaming-focused 3DMark tests, it manages 7,586 in the 16-thread run and 943 in single-thread, a gap that highlights a strong multi-threaded presence.

When we compare the CPU to its nearest neighbours in the data, it is nearly identical to four other processors. The Intel Core Ultra 5 135H is just 0.1% ahead, while the Intel Xeon Phi 7210 is 0.4% behind, the Intel Core i5-13500HX is 0.5% behind, and the AMD Ryzen 5 5600XT is 0.6% ahead. These differences are negligible, meaning the Ryzen 7 5800X delivers performance consistent with a mid-range to upper-mid-range desktop chip from its generation, but it is not a top-tier part. The gap to the fastest CPUs is much larger, but the track record here is not one of extreme multi‑core density.

For The Technomancer, the CPU's 16 threads may help with the game's background engine threads, but the measured frame rates at 1080p show that the chip can easily push past 100 FPS. At 1080p with Low settings the combo reaches 149 FPS on average, which suggests that even at high refresh rates the CPU is not the bottleneck. The fact that the same GPU only scores 33 FPS at 4K while the CPU remains mostly idle indicates that the 5800X has far more computational headroom than this title can use.

GPU Role

The AMD Radeon RX 7600 XT is the main renderer for The Technomancer. It is based on the Navi‑33 chip (RDNA 3.0) on a 6nm TSMC process, with a die containing 13,300 million transistors. The card carries 16GB of GDDR6 memory on a 128-bit bus and delivers 288.0 GB/s of bandwidth. Its base clock is 1980 MHz, the game clock is 2470 MHz, and the boost clock reaches 2755 MHz. Pixel fill rate is 176.3 GPixel/s and texture rate is 352.6 GTexel/s, while FP32 compute sits at 22.57 TFLOPS.

The GPU’s database percentile is 60k, and its average benchmark score is 17,083. Its PassMark G3D score is 17,132 and its DirectX 12 score is 65, while OpenCL (Geekbench) sits at 92,426 and Vulkan at 48,366. The Compute compute score (PassMark) is 8,987. These numbers place the card in the lower‑mid range of currently tested GPUs.

The nearest rivals show that the RX 7600 XT is essentially matched with several older or different cards. The GeForce GTX 690 is 0.3% ahead, the AMD Radeon HD 7970M is 0.4% ahead, and the Tesla M4 is 0.9% ahead, while the GeForce RTX 3070 is 0.7% behind. The delta values are all below 1%, meaning the RX 7600 XT are performance-equivalent to these GPUs in aggregate benchmarks. However, when considering raw memory capacity, 16 GB of VRAM is generous for a game from 2016, though the measured FPS show that this size isn’t a heavy factor for The Texomancer.

Setting the Stage: 1080p, 1440p, and 4K

The measured results across three resolutions give the clearest picture of where the combo sits. For the whole set, the GPU is the dominant factor, scaling nearly linearly with respect to resolution change.

At 1080p, the combo delivers 149 FPS on Low, 115 FPS on Medium, 98 FPS on High, and 77 FPS on Ultra. Dropping to 1440p reduces each preset by about 34%: Low falls to 98 FPS, Medium to 75 FPS, High to 64 FPS, and Ultra to 50 FPS. At 4K, the frame rate shrinks to roughly 27-54 FPS, with Low hitting 54, Medium 41, High 35, and Ultra 27. The dollar values are fairly consistent: from 1080p High (98 FPS) to 1440p High (94 FPS) is a 34.7% drop, and from 1080p Ultra (77 FPS) to 4K Ultra (27 FPS) is a 64.9% drop. The same proportional decay is seen on every preset.

In classic, the scaling strongly indicates a GPU-bound environment when the resolution rises. The CPU’s frame rate at the lowest resolution (149 FPS) is already near the gaming monitor’s maximum, and the 33%-to‑64% drop when moving from 1080p to 4K matches what the GPU is sold for. If the CPU were the limiter, the frame rate would have been more uniform as resolution climbs, because a CPU can feed more than enough data for a scene. Based on the measured rows, the GPU is the deciding component for this pair in The Textomancer.

Settings and Playable Performance

The tested presets give a clear view of what to expect at each quality level. At 1080p, the best playable experience for most users is the Medium preset, which delivers 115 FPS. The High preset offers 98 FPS and still strong, but Ultra drops to 77 FPS, which is still perfectly smooth for action RPG play. However, because the frame rate is still very high on Medium while the visual quality is noticeably richer than Low, Medium offers the best image throughput compromise.

When moving to 1440p, Medium becomes a comfortable 75 FPS, while High is slightly lower (64 FPS) and Ultra is only 50 FPS. At 4K, only the Low preset reaches 54 FPS; Medium averages 41, High hits 35, and Ultra barely earns 27 FPS. If a user wants to play at 4K, the measured data suggests that the Low preset is the only one that stays above a 30 FPS average, while Medium 41 FPS can be playable if the user accepts 40 FPS. The best rounded recommendation is to use the Medium preset across all resolutions, because it gives the largest quality increase over Low with only a smaller frame rate loss.

The data shows that the Ultra preset at 4K is the only combination that falls below the 30 FPS threshold, which is generally considered jittery for an Active RPG. Therefore, the ``High`` preset at 1080p (100 FPS) and the ``Medium` preset at 1440p (75 FPS) stand as the best quality-to-risk picks based on the measurable frame rates.

How This Combo Ranks

According to the database, the Ryzen 7 5800X + RX 7600 XT suite sits at rank 2335 out of 3696 total combinations in their position. That places it in the bottom half of the tested pool, since more than half the paired PCs deliver a better overall result. The rank reflects the average FPS across all presets and resolutions in this game, plus the raw compute performance of both parts. Because the GPU is only a mid‑range card (60 percentile), the fact that the CPU is highly ranked (81 percentile) doesn’t compensate for the GPU’s moderate score. The grand 2335th spot is largely driven by the GPU’s inability to reach high frame rates at 1440p and 4K with high quality.

Despite that, the configuration is not a poor performer. It can play the game smoothly at 1080p with all presets, and it can hold near 60 FPS at 1440p with High if you dropped to High or Medium. Nevertheless, for the top smooth action, many higher‑end GPUs that are available in the database will naturally outscore this pair. The rank data confirm that this combo is not designed for 4K gaming; it is a mid‑range setup that benefits from a lower resolution or a reduced preset.

FAQ

Q: Which settings should I pick to get the highest frame rate at 1080p?

A: The Low preset yields the highest average FPS of 149 at 1920×1080. However, the Medium preset offers 115 FPS, making a stronger contrast and richer visuals for a slight cost.

Q: Can this combo run The Technomancer at Ultra settings on 4K?

A: At 3840×2160 with the Ultra preset, the measured average drops to 27 FPS, which is below the typical playable threshold. The Low preset alone reaches 54 FPS at that resolution.

Q: What is the main limiting factor?

A: The scaling pattern across 1080p, 1440p, and 4K shows the GPU limits the frame rate. The CPU can remain at 149 FPS at 1080p Low, while 4K reduces every preset by a similar proportion, which is typical of a GPU‑bounded workload.

Q: How does the overall rank compare to other tested combinations?

A: This combo is placed at 2335 out of 3696 tested pairs, meaning it outpaces about 37.0% of them (the exact percentage is not in the data). It belongs to the lower half of the distribution for this game.

Q: Does the 16 GB VRAM matter?

A: The 16 GB GDDR6 memory offers a large allocation, but the database does not include any VRAM usage or performance difference for The Technomancer. The measured FPS are lower at 4K even though the game likely doesn’t need more than 8 GB of VRAM, suggesting that the raw computing power per pixel is the main bottleneck, not the memory capacity.

Q: What is the best balanced preset for a 1440p monitor?

A: At 2560×1440, the Medium preset delivers 75 FPS, which is a smooth experience. High yields 64 FPS and Ultra 50 FPS, while Low is too heavy on graphics. Given the data, Medium offers the best quality‑to‑performance ratio for this pair.