The Technomancer

The AMD Ryzen 5 5600 paired with the AMD Radeon RX 9060 produces a clear picture of how The Technomancer scales across resolutions. The data shows a predictable and steep decline in average frame rates as pixel count increases, which is typical for a GPU-bound title. At 1920x1080 with High settings, the combo delivers 103 FPS. Moving to 2560x1440 drops that average to 67 FPS, a 36 FPS reduction. At 3840x2160, the average falls further to 37 FPS. This scaling pattern indicates that the Radeon RX 9060 is the primary limiting component at higher resolutions, as the frame rate loss from 1440p to 4K is proportionally larger than the jump from 1080p to 1440p. The gap between Low and Ultra settings at each resolution reinforces this; at 4K, the spread from Low (56 FPS) to Ultra (29 FPS) is 27 FPS, showing that the GPU’s rendering load is the dominant factor in determining performance at the highest pixel counts.

Resolution Scaling

The measured FPS data for this combination reveals a consistent pattern of diminishing returns as resolution increases. At 1920x1080, the system has ample headroom, with even Ultra settings producing 80 FPS, which is comfortably above the 60 FPS threshold for smooth gameplay. The jump to 2560x1440 cuts performance by roughly a third across all settings; High drops from 103 to 67 FPS, and Ultra falls from 80 to 52 FPS. This indicates that the GPU is beginning to feel the pressure of additional pixels, but the experience remains playable at Medium and High presets. At 3840x2160, the situation changes dramatically. The average frame rate at High settings (37 FPS) falls below the 40 FPS mark, and Ultra drops to 29 FPS, which is below the playable threshold for most users. The scaling from 1440p to 4K represents a 45% reduction in performance at High settings, a steeper decline than the 35% drop observed when moving from 1080p to 1440p. This non-linear scaling is a strong indicator that the RX 9060’s 8 GB VRAM and 128-bit memory bus are being saturated at 4K, causing the GPU to become the definitive bottleneck in this configuration.

The Low preset at 4K yields 56 FPS, which is the only playable option at that resolution for this combo, but it requires a significant sacrifice in visual fidelity. The data suggests that 2560x1440 is the sweet spot for balancing visual quality and performance with this processor and graphics card pairing. At 1440p Medium, the combo achieves 79 FPS, which is smooth and visually acceptable, while High settings at 67 FPS remain viable for those who prioritize image quality. The 4K results, with their sub-40 FPS averages on High and Ultra, effectively rule out that resolution as a practical option unless the user is willing to drop to Low settings, which still only reaches 56 FPS.

CPU Role

The AMD Ryzen 5 5600 is a 6-core, 12-thread processor based on the Zen 3 architecture, running with a base clock of 3.50 GHz and a boost clock of 4.40 GHz. Its benchmark scores place it in the 74th percentile among all CPUs, with an average benchmark score of 20468. In the context of The Technomancer, a 2016 Action RPG, the CPU’s role is to feed the GPU with draw calls and handle game logic. The data indicates that the CPU is not the limiting factor in this pairing, as the frame rates scale inversely with resolution, a classic sign of GPU limitation. At 1080p, the CPU has more than enough headroom to push the GPU to its limits, as evidenced by the 157 FPS average at Low settings. This high frame rate suggests that the Ryzen 5 5600’s single-thread performance, which scores 882 in 3dmark_single_thread and 2584 in Cinebench R23 single-core, is sufficient to avoid holding back the RX 9060 at lower resolutions.

The CPU’s multi-threaded capabilities, shown by a Cinebench R23 multi-core score of 18309, are also relevant for The Technomancer, which can utilize multiple cores for physics and AI calculations. However, the benchmark results show that even at 1080p Ultra, where the CPU workload is highest relative to the GPU, the combo still achieves 80 FPS. This indicates that the 5600’s 6 cores and 12 threads are adequate for this title. The data does not show a scenario where the CPU becomes a bottleneck, as the frame rate drops consistently when resolution increases, which would not happen if the CPU were struggling to keep up. The nearest rivals to the 5600 in terms of average benchmark score, such as the Intel Core Ultra 7 258V with a deltaPct of 0.1% and the AMD Ryzen 5 8500G with a deltaPct of 0.2%, are within a negligible performance margin, suggesting that the 5600’s processing power is well balanced for this GPU pairing.

GPU Role

The AMD Radeon RX 9060 is the dominant component in this system’s gaming performance. It features 8 GB of GDDR6 memory on a 128-bit bus, providing 288.0 GB/s of bandwidth. The GPU has a base clock of 1700 MHz, a boost clock of 2990 MHz, and a game clock of 2400 MHz, with 1792 shading units and 64 ROPs. Its benchmark scores show a percentile rank of 59 among all GPUs, with an average benchmark score of 16014. The nearest rival, the NVIDIA GeForce RTX 3060 Ti, has an average score of 16129, which is 0.7% higher, placing the RX 9060 in similar performance territory. The data from The Technomancer shows that the GPU’s memory bandwidth and capacity are critical at higher resolutions. At 4K, the High preset only achieves 37 FPS, which is likely due to the 8 GB VRAM being insufficient for the texture and geometry demands of the game at that resolution, forcing the GPU to manage memory more slowly.

The GPU’s raw compute power, measured at 21.43 TFLOPS FP32, is sufficient for 1080p and 1440p gaming, as shown by the 120 FPS average at 1080p Medium and 79 FPS at 1440p Medium. However, the 128-bit memory bus is a limiting factor when pixel count increases. The data shows a clear correlation between resolution and performance, with the 4K Ultra preset dropping to 29 FPS, which is below the 30 FPS minimum for a playable experience. The RX 9060’s performance relative to its rivals is consistent across tests, with a 1% advantage over the AMD Radeon R9 370X and a 1% disadvantage to the AMD Radeon RX 7700. This indicates that while the GPU is capable for its class, it does not have the memory bandwidth or capacity to handle 4K gaming in The Technomancer at high settings. The GPU’s role is clearly the determining factor in this combo’s performance, as the CPU has ample headroom, and all frame rate variations can be directly attributed to the graphics card’s rendering capabilities.

How This Combo Ranks

In the database of tested combinations, this pairing of the AMD Ryzen 5 5600 with the AMD Radeon RX 9060 holds a rank of 1632 out of 2825 combos for The Technomancer. This places it in the 58th percentile of all tested systems, indicating that it performs slightly above the median but is not a top-tier configuration. The rank is influenced by the GPU’s mid-range performance, as the CPU is capable of supporting higher-end graphics cards. The data suggests that the combo is better suited for 1080p and 1440p gaming, where it delivers high frame rates, rather than 4K, where it falls short of playable thresholds on higher settings. When compared to other potential pairings, the 5600’s CPU performance is not the bottleneck, as its benchmark scores are strong for its class. The GPU, however, with its 8 GB VRAM and 128-bit bus, limits the combo’s overall ranking in a game that is sensitive to memory bandwidth at high resolutions.

The rank of 1632 out of 2825 means that 1193 other combos perform better in this game, while 1631 perform worse. This positions the combo in the middle of the pack, which is consistent with the GPU’s 59th percentile ranking among all GPUs. The CPU’s 74th percentile ranking is higher, but the overall combo rank is dragged down by the GPU’s limitations at higher resolutions. The data shows that at 1080p, this combo performs admirably, with even Ultra settings achieving 80 FPS, which would put it in the top tier for that resolution. However, at 4K, the performance drops to a level that is below the average for tested combos, which likely explains its mid-pack ranking. The combination is a balanced pairing for mainstream gaming, but it does not excel in any particular area, making it a middle-of-the-road option for The Technomancer.

FAQ

Q: What is the best resolution for this CPU and GPU combination in The Technomancer?

A: Based on the measured FPS data, 2560x1440 is the optimal resolution. It provides a good balance between visual quality and performance, with High settings achieving 67 FPS and Medium settings reaching 79 FPS.

Q: Can this combo handle 4K gaming in The Technomancer?

A: The data shows that 4K gaming is not practical for this combo. At 4K High settings, the average FPS is 37, and at Ultra, it drops to 29. Only the Low preset at 4K reaches a playable 56 FPS, but that requires significant visual compromises.

Q: Is the CPU or GPU more of a bottleneck in this configuration?

A: The GPU is the primary bottleneck. The data shows that frame rates scale inversely with resolution, which is a classic sign of GPU limitation. At 1080p, the combo achieves 157 FPS on Low settings, indicating the CPU has ample headroom. The CPU’s benchmark scores, such as a Cinebench R23 multi-core score of 18309, also support that it is not the limiting factor.

Q: How does the RX 9060 compare to its nearest rivals in terms of benchmark scores?

A: The RX 9060 has an average benchmark score of 16014. The NVIDIA GeForce RTX 3060 Ti is 0.7% faster with a score of 16129, while the AMD Radeon R9 370X is 1% slower with a score of 15862. The AMD Radeon RX 7700 is also 1% faster with a score of 15852.

Q: What settings preset provides the highest frame rate at 1080p?

A: The Low preset at 1080p provides the highest average FPS at 157. However, Medium settings achieve 120 FPS, which is still well above the 60 FPS threshold and may offer a better visual experience.

Q: Does the Ryzen 5 5600 have enough CPU power for this game?

A: Yes, the data indicates the CPU is more than sufficient. It ranks in the 74th percentile of all CPUs with an average benchmark score of 20468. Even at 1080p Ultra, where the CPU load is highest, the combo achieves 80 FPS, showing no signs of CPU bottlenecking.

Settings Recommendations

For the best experience with this AMD Ryzen 5 5600 and AMD Radeon RX 9060 combination, the settings should be chosen based on the target resolution. At 1920x1080, the data shows that Ultra settings are viable, with an average FPS of 80, which is above the 60 FPS target for smooth gameplay. For users who prefer higher frame rates, the Medium preset at 1080p delivers 120 FPS, which is excellent for fast-paced action. The High preset at 1080p achieves 103 FPS, providing a good balance between visual fidelity and performance. At 2560x1440, the Medium preset is the recommended choice, as it delivers 79 FPS, which is playable and visually acceptable. The High preset at 1440p drops to 67 FPS, which is still playable but may not be ideal for all users. The Ultra preset at 1440p falls to 52 FPS, which is borderline for a smooth experience, so it is not recommended unless the user prioritizes visuals over frame rate. At 3840x2160, the only playable option is the Low preset, which achieves 56 FPS. The Medium preset at 4K drops to 43 FPS, which is below the 60 FPS target, and High and Ultra are not recommended due to their sub-40 FPS averages. Therefore, the optimal settings are 1080p Ultra for maximum visual quality, 1440p Medium for a balance of quality and performance, and 4K Low if the user insists on that resolution.

Measured FPS Breakdown

The measured FPS data for this combo provides a detailed look at performance across resolutions and settings.

At 1920x1080, the Low preset delivers an average of 157 FPS, which is the highest frame rate recorded for this combination. The Medium preset at 1080p achieves an average of 120 FPS, with a minimum of 102 FPS and a maximum of 138 FPS. The High preset at 1080p results in an average of 103 FPS. The Ultra preset at 1080p produces an average of 80 FPS.

At 2560x1440, the Low preset yields an average of 102 FPS. The Medium preset at 1440p achieves an average of 79 FPS, with a minimum of 67 FPS and a maximum of 90 FPS. The High preset at 1440p results in an average of 67 FPS. The Ultra preset at 1440p drops to an average of 52 FPS.

At 3840x2160, the Low preset delivers an average of 56 FPS. The Medium preset at 4K achieves an average of 43 FPS, with a minimum of 37 FPS and a maximum of 50 FPS. The High preset at 4K results in an average of 37 FPS. The Ultra preset at 4K produces an average of 29 FPS.

The data shows a clear trend: the combo is capable of high frame rates at 1080p and 1440p, but struggles at 4K. The 1080p results, ranging from 80 to 157 FPS, indicate that the system is well-suited for competitive or high-refresh-rate gaming at that resolution. The 1440p results, ranging from 52 to 102 FPS, show that the system can handle most settings at that resolution, with Medium and High being the most balanced options. The 4K results, ranging from 29 to 56 FPS, demonstrate that the combo is not designed for 4K gaming, as even the Low preset only achieves 56 FPS, which is below the 60 FPS target for a smooth experience. The minimum FPS values are only recorded for the Medium settings, with 102 FPS at 1080p, 67 FPS at 1440p, and 37 FPS at 4K, providing a consistent frame time experience at those settings.