The Long Drive

The Long Drive

AVERAGE FPS
92
good

This combination provides smooth gameplay with an average of 92 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 27 40 64 73
1440p QHD 47 69 111 132
1080p Full HD 73 103 167 202

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 73
3840x2160 Medium 64
3840x2160 High 40
3840x2160 Ultra 27
2560x1440 Low 132
2560x1440 Medium 111
2560x1440 High 69
2560x1440 Ultra 47
1920x1080 Low 202
1920x1080 Medium 167
1920x1080 High 103
1920x1080 Ultra 73

The Long Drive with AMD Ryzen 5 2600 + NVIDIA GeForce RTX 4060, In-Depth Analysis

The AMD Ryzen 5 2600 paired with the NVIDIA GeForce RTX 4060 delivers a highly playable experience in The Long Drive, but the data reveals a system that is heavily influenced by graphics settings and resolution scaling. At 1080p, the combo is capable of exceeding 200 FPS on Low settings, yet it drops to just 27 FPS at 4K Ultra, indicating that the GPU becomes the primary bottleneck at higher resolutions, while the older CPU holds its own at lower settings.

Resolution Scaling

The transition from 1080p to 4K produces a dramatic decline in frame rates across all settings, confirming that the RTX 4060 is the limiting factor as pixel count increases. At High settings, the average FPS falls from 103.2 at 1920x1080 to 68.7 at 2560x1440, a reduction of roughly 33%, before plummeting to 39.7 at 3840x2160. This steep drop-off is typical of a GPU-bound scenario, where the 8 GB of VRAM and 128-bit memory bus struggle to feed the 4K resolution’s massive pixel throughput.

The scaling pattern is even more pronounced at Low settings, where the 1080p result of 202.4 FPS drops to 132.2 at 1440p and then to 72.6 at 4K. The 4K Low figure is still respectable, but the 62% reduction from 1080p highlights how much headroom is lost as resolution climbs. At Medium settings, the same trend holds: 166.8 FPS at 1080p, 111.4 at 1440p, and 63.5 at 4K. The Ultra preset is the most demanding, with 73 FPS at 1080p, 47.3 at 1440p, and a barely playable 27 at 4K. This consistent drop across all presets indicates that resolution, not settings, is the dominant variable in determining performance.

The data suggests that 1080p is the sweet spot for this combo, as even Ultra settings maintain a playable 73 FPS. At 1440p, High settings become the practical ceiling, while 4K requires Low or Medium settings to stay above 60 FPS. The GPU’s compute capabilities, measured at 15.11 TFLOPS FP32, are sufficient for 1080p gaming but are clearly taxed by the 8.3 million pixels of 4K.

CPU Role

The Ryzen 5 2600, with its 6 cores and 12 threads, provides a solid foundation for The Long Drive’s driving simulation logic, but its age shows in the benchmark data. The CPU’s boost clock of 3.90 GHz and base clock of 3.40 GHz are modest by modern standards, yet the PassMark multithread score of 13160 suggests adequate parallel processing for game physics. In the Cinebench R23 multicore test, the chip scores 11186, which places it in the 77th percentile of all CPUs, indicating it is still a capable mid-range processor.

However, the single-thread performance is where the 2600 lags. A Cinebench R23 single-core score of 1579 and a PassMark single-thread score of 2239 reveal that the Zen architecture’s per-core efficiency is below newer designs. This matters in The Long Drive because driving simulations often rely on a single main thread for game logic. At 1080p Low, where the GPU is not stressed, the CPU must keep up with the frame rate demand of 202.4 FPS. The fact that it achieves this suggests the 2600 is not a severe bottleneck at lower resolutions, but the gap between 1080p and 1440p performance at Low settings (202.4 vs 132.2 FPS) hints that the GPU is already taking over as the limiting factor.

The CPU’s nearest rivals in the benchmark database include the Intel Core i5-11600KF and AMD Ryzen 5 7530U, with average scores within 0.7% of the 2600. This places the 2600 in a competitive position, though its 12 nm process node and 65 W TDP are outdated compared to the 5 nm RTX 4060’s efficiency. For The Long Drive, the data shows the CPU is sufficient for 60 FPS gameplay at 1440p and 1080p, but it is not the component driving performance gains at higher resolutions.

How This Combo Ranks

In the global database of tested hardware combinations, this pairing of the Ryzen 5 2600 and RTX 4060 ranks 992 out of 1734 combos for The Long Drive. This places it in the bottom 43% of all tested systems, which is a surprisingly low position given the GPU’s capabilities. The rank suggests that while the combo is playable, it does not excel relative to other pairings, likely due to the CPU’s age limiting the system’s full potential.

The RTX 4060 alone sits in the 66th percentile of all GPUs, with an average benchmark score of 23181. Its nearest rival, the AMD Radeon RX 6600M, scores 23321, a delta of -0.6%, meaning the 4060 is nearly identical in raw performance. Similarly, the CPU’s 77th percentile ranking is respectable, but the combo’s 992nd place out of 1734 indicates that the pairing does not synergize as well as other combinations. The data implies that a newer CPU with the same GPU would likely rank higher, as the 2600’s single-thread limitations may hold back the 4060 in CPU-bound scenarios.

Interestingly, the combo rank is not catastrophic; it is above average in terms of raw FPS at 1080p, where it achieves 202.4 FPS on Low. However, the relative ranking suggests that many other tested combos deliver better performance per dollar or better scaling at higher resolutions. For users with this specific hardware, the data indicates that the RTX 4060 is the stronger component, and upgrading the CPU would yield more consistent results across all settings.

FAQ

*Q: What is the best resolution for this combo in The Long Drive?*

A: The data shows 1920x1080 is the optimal resolution, with High settings achieving 103.2 FPS and even Ultra maintaining 73 FPS. At 2560x1440, High drops to 68.7 FPS, and at 3840x2160, only Low (72.6 FPS) and Medium (63.5 FPS) remain playable.

Q: Is the RTX 4060 or the Ryzen 5 2600 the bottleneck?

A: At 4K and 1440p, the GPU is clearly the bottleneck, as FPS scales with resolution. At 1080p Low, the CPU’s single-thread performance (1579 in Cinebench R23) may limit the 202.4 FPS ceiling, but the GPU still handles the load well.

Q: How does this combo compare to the RTX 4060’s closest rivals?

A: The RTX 4060’s average benchmark score of 23181 is within 0.7% of the AMD Radeon RX 6600M and Intel Arc B580, so performance is nearly identical. The combo’s rank of 992 out of 1734 is below average, suggesting the CPU drags it down.

Q: Can this system handle 4K gaming?

A: Yes, but only at lower settings. At 4K Low, the average FPS is 72.6, and at Medium it drops to 63.5. High and Ultra are not recommended, as they fall to 39.7 and 27 FPS respectively.

Q: What is the CPU’s strongest benchmark result?

A: The Ryzen 5 2600 scores 13160 in PassMark multithread and 11186 in Cinebench R23 multicore, which are strong results for a 6-core chip. Its single-thread score of 2239 in PassMark is weaker by comparison.

Q: Does the GPU’s VRAM affect 4K performance?

A: The 8 GB of GDDR6 memory on the RTX 4060, with a 128-bit bus and 272.0 GB/s bandwidth, is a likely factor in the 4K performance drop. The data shows a 62% reduction from 1080p to 4K at Low settings, indicating memory bandwidth limitations.

GPU Role

The NVIDIA GeForce RTX 4060 is the dominant component in this pairing, and its specifications explain the measured FPS data. With 3072 shading units, 96 texture mapping units, and 48 raster output pipelines, the GPU is designed for 1080p and 1440p gaming. Its boost clock of 2460 MHz and base clock of 1830 MHz provide solid compute throughput, as evidenced by the PassMark G3D score of 19545. The GPU’s 15.11 TFLOPS FP32 performance is ample for The Long Drive, which is not a graphically demanding title by modern standards.

The 8 GB of GDDR6 memory, running at 2125 MHz with a 128-bit bus, delivers 272.0 GB/s of bandwidth. This is a limiting factor at 4K, where the high pixel count requires more memory bandwidth to maintain frame rates. The data supports this, as the 4K High average of 39.7 FPS is significantly lower than the 1080p High average of 103.2 FPS, a 61% drop. The GPU’s 24 ray tracing cores and 96 tensor cores are present but not heavily utilized in this driving simulation, which relies more on rasterization.

The RTX 4060’s nearest rival, the AMD Radeon RX 6600M, scores 23321 in average benchmarks, a delta of -0.6%, making them functionally equivalent. The Intel Arc B580 is also close with a score of 23021, a 0.7% delta. This means the 4060 is well-positioned among its peers, but the combo’s low rank of 992 out of 1734 suggests that other GPUs paired with better CPUs achieve higher FPS in The Long Drive. The GPU’s 66th percentile ranking indicates it is above average, but not exceptional.

Settings Recommendations

Based on the measured FPS data, the optimal settings for this combo depend on the target resolution. At 1920x1080, Ultra settings are viable with an average of 73 FPS, but High settings offer a better balance with 103.2 FPS, providing a 41% performance boost with minimal visual difference. Medium settings at 166.8 FPS are ideal for high-refresh-rate monitors, while Low at 202.4 FPS is only useful for competitive play.

For 2560x1440, High settings are the recommended choice, delivering 68.7 FPS, which is just above the 60 FPS threshold. Medium settings at 111.4 FPS are smoother but sacrifice visual quality, while Ultra at 47.3 FPS is too low for consistent play. Low settings at 132.2 FPS are an option for maximum smoothness, but the visual downgrade is significant.

At 3840x2160, the data indicates that Medium settings at 63.5 FPS provide the best experience, as they maintain playability without the harsh visual compromises of Low (72.6 FPS). High settings at 39.7 FPS are not recommended, and Ultra at 27 FPS is unplayable. The RTX 4060’s 8 GB VRAM and 128-bit bus are the limiting factors here, so users should accept Medium as the ceiling for 4K.

Measured FPS Breakdown

The complete data set for this combo in The Long Drive is as follows. At 1920x1080, the average FPS ranges from 202.4 on Low to 73 on Ultra, with Medium at 166.8 and High at 103.2. At 2560x1440, Low achieves 132.2 FPS, Medium 111.4, High 68.7, and Ultra drops to 47.3. At 3840x2160, Low is the only setting above 70 FPS at 72.6, followed by Medium at 63.5, High at 39.7, and Ultra at a mere 27.

The scaling from 1080p to 1440p reduces FPS by approximately 35-45% across all settings, while the jump to 4K causes a further 40-50% reduction. The largest absolute drop is from 1080p Low (202.4 FPS) to 4K Low (72.6 FPS), a 64% decrease. The smallest drop is from 1080p Ultra (73 FPS) to 4K Ultra (27 FPS), a 63% reduction, indicating that Ultra settings are consistently demanding regardless of resolution. These numbers confirm that the RTX 4060 is the primary performance driver, with the Ryzen 5 2600 providing sufficient support at lower resolutions but unable to overcome the GPU’s bandwidth constraints at 4K.

Hardware Specifications

AMD Ryzen 5 2600

Cores / Threads 6 / 12
Base Clock 3400 MHz
Boost Clock 3900 MHz
TDP 65W
Socket AMD Socket AM4
View Full CPU Details →

NVIDIA GeForce RTX 4060

VRAM 8 GB GDDR6
Base Clock —
Boost Clock 2460 MHz MHz
TDP 115 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 2600 + NVIDIA GeForce RTX 4060 in The Long Drive

Resolution Settings Avg FPS
3840x2160 Low 72.6
3840x2160 Medium 63.5
3840x2160 High 39.7
3840x2160 Ultra 27.0
2560x1440 Low 132.2
2560x1440 Medium 111.4
2560x1440 High 68.7
2560x1440 Ultra 47.3
1920x1080 Low 202.4
1920x1080 Medium 166.8
1920x1080 High 103.2
1920x1080 Ultra 73.0

The Long Drive with Ryzen 5 2600 + Other GPUs

See how The Long Drive performs with the same CPU but different graphics cards.

The Long Drive with RTX 4060 + Other CPUs

See how The Long Drive performs with the same GPU but different processors.

Other Games with Ryzen 5 2600 + RTX 4060

Explore FPS benchmarks for other games using this same hardware combination.