Steamworld Build
This combination offers playable performance with an average of 45 FPS, though you may want to lower settings for smoother gameplay.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 13 | 20 | 26 | 34 |
| 1440p QHD | 25 | 37 | 49 | 65 |
| 1080p Full HD | 39 | 58 | 78 | 101 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Steamworld Build with Intel Core i7-14700F + AMD Radeon RX 580, In-Depth Analysis
Steamworld Build presents an unusual stress test for the Intel Core i7-14700F and AMD Radeon RX 580 pairing. This is a combination of a modern 20-core processor with a legacy 2017 graphics card, and the benchmark data reflects that imbalance clearly. The measured frames per second across resolutions and settings tell a story of a system whose overall capability is strictly gated by its graphics processor, with the CPU rarely breaking a sweat.
Resolution Scaling
The performance drop from 1080p to 4K is steep and consistent, which is the classic signature of a GPU-bound scenario. At Low settings, the average frame rate falls from 101 FPS at 1920x1080 to 65 FPS at 2560x1440, a reduction of 36 FPS. Pushing further to 3840x2160 at Low settings yields just 34 FPS, meaning the jump from 1440p to 4K costs another 31 FPS, leaving the system at roughly one-third of its 1080p performance. This is a massive scaling loss that indicates the RX 580's rendering pipeline is saturated by the pixel count.
The pattern holds at every quality preset. At Medium settings, the average drops from 78 FPS at 1080p to 49 FPS at 1440p, and then to 26 FPS at 4K. At High settings, the numbers are 58, 37, and 20 FPS respectively. The relative scaling between resolutions is almost linear, suggesting there is no memory bandwidth cliff or cache bottleneck — simply a raw fill-rate limitation. The 256-bit memory bus and 256.0 GB/s bandwidth of the RX 580 are being pushed to their limits as the pixel workload quadruples from 1080p to 4K.
The Ultra preset shows the most dramatic collapse. It delivers 39 FPS at 1080p, which is already marginal for a city builder, but that figure falls to 25 FPS at 1440p and plummets to just 13 FPS at 4K. This is a 67% performance loss from 1080p to 4K, indicating that the Ultra preset introduces effects that the Polaris architecture cannot handle efficiently at high resolutions. The data suggests that the limiting component at 4K is unequivocally the GPU; the CPU has ample headroom, given its 20 cores and 28 threads, to feed frames far faster than this graphics card can produce them.
How This Combo Ranks
In the database of tested configurations for Steamworld Build, this specific pairing of the Core i7-14700F and Radeon RX 580 ranks 3378 out of 3706 possible combinations. That places it in the bottom 9% of all tested systems, which is a poor showing for a processor that itself sits in the 91st percentile among all CPUs. The disconnect is stark: the CPU is a top-tier performer, but the combo rank reflects the weakest link in the chain.
The ranking data makes it clear that this is not a balanced build for this specific game. A rank of 3378 out of 3706 means the vast majority of other CPU-GPU pairings deliver higher frame rates in Steamworld Build. This is not a surprise given that the RX 580's average benchmark score of 12928 places it in the 53rd percentile among all GPUs, while the i7-14700F's average score of 53620 puts it in the 91st percentile. The processor is capable of far more work than this graphics card can request of it, and the combo ranking penalizes that inefficiency.
When looking at the nearest rivals for the GPU, the RX 580 sits within 0.6% of the NVIDIA GeForce RTX 3050 Ti Mobile and the AMD Radeon 740M. This means that in raw compute terms, the RX 580 is roughly equivalent to those mobile-oriented chips, despite being a desktop card with a 185 W TDP. The combo rank suggests that in Steamworld Build specifically, the system will perform like those lower-tier options, regardless of the powerful CPU sitting next to it. The CPU's nearest rivals, such as the AMD Ryzen 9 7900X, are all within 0.8% performance of the i7-14700F in general benchmarks, but that proximity does not translate to better gaming results here because the GPU is the bottleneck.
GPU Role
The AMD Radeon RX 580 is built on the Polaris 20 chip using a 14 nm process from GlobalFoundries. It has 2304 shading units, 144 texture mapping units, and 32 raster operations pipelines. The card operates at a base clock of 1257 MHz and a boost clock of 1340 MHz, which is modest by modern standards. Its memory configuration is an 8 GB frame buffer of GDDR5 on a 256-bit bus, delivering 256.0 GB/s of bandwidth. These specifications are the primary determinants of the frame rates measured in Steamworld Build.
The 8 GB of VRAM is not the limiting factor in this game at these settings, as the measured frame rates drop too uniformly with resolution increases to suggest a memory capacity spill. Instead, the 6.175 TFLOPS of FP32 compute and the 193.0 GTexel/s texture rate are the binding constraints. At 4K Ultra, the card can only muster 13 FPS, which is a clear indicator that the shading and texturing workloads overwhelm the GPU's processing units. The pixel rate of 42.88 GPixel/s also caps how quickly the card can fill the screen with rendered geometry.
The card's age shows in its DirectX feature level support of 12_0, which is the baseline for modern titles. While Steamworld Build is not a graphically intensive game by 2024 standards, the RX 580's compute resources are just too thin to handle high resolutions with complex effects. The benchmark scores reflect this: the 3DMark Steel Nomad DX12 score of 1005 and the Passmark G3D score of 8813 are indicative of a card that competes with the NVIDIA GeForce GTX 1660 SUPER (which is 0.4% faster on average). The GPU's 53rd percentile ranking among all graphics cards confirms that this is a mid-pack performer at best, and in a city builder with potentially many on-screen entities, the fill rate and shader throughput become the decisive factors.
Measured FPS Breakdown
The complete set of measured frame rates provides a comprehensive view of the system's behavior. At 1920x1080 with Low settings, the average FPS is 101, which is the highest recorded value across all tests. This is a playable and smooth experience for a city builder. Moving to Medium at 1080p, the average drops to 78 FPS with a minimum of 66 and a maximum of 89 FPS. The High preset at 1080p yields 58 FPS on average, and the Ultra preset brings that down to 39 FPS. These numbers show that even at the lowest resolution, the Ultra settings exact a heavy toll, cutting performance by more than half compared to Low.
At 2560x1440, the Low preset still delivers a respectable 65 FPS average. Medium at 1440p produces 49 FPS with a range of 42 to 57 FPS, which is acceptable for a slower-paced genre. High at 1440p drops to 37 FPS, and Ultra falls to 25 FPS. The step from 1080p to 1440p costs roughly 35% performance across all settings, which is expected given the increase in pixel count from 2.1 million to 3.7 million.
At 3840x2160, the results are largely below playable thresholds. Low settings manage 34 FPS, which is borderline for a city builder where frame pacing is less critical than in action games. Medium at 4K averages 26 FPS with a minimum of 22 and a maximum of 30 FPS, showing that even the best-case frame times are inconsistent. High at 4K produces 20 FPS, and Ultra is a slideshow at 13 FPS. The data shows a clear pattern: the RX 580 can handle 1080p and 1440p at lower settings, but 4K is beyond its capabilities for this title.
Settings Recommendations
Based on the measured rows, the optimal experience balances visual fidelity with a stable frame rate. At 1920x1080, the Medium preset is the sweet spot. It delivers 78 FPS on average, which is well above the threshold for smooth gameplay, and the minimum of 66 FPS ensures that there are no noticeable hitches even when the city grows complex. The High preset at 58 FPS is also viable, but the 20 FPS gain from dropping to Medium is substantial and the visual difference in a top-down city builder is likely minimal.
For users with a 2560x1440 monitor, the Low preset is the only setting that provides a consistently smooth experience, with 65 FPS average. Medium at 1440p is playable at 49 FPS, but the minimum of 42 FPS suggests that there will be moments of perceptible slowdown during heavy simulation. The High and Ultra presets at 1440p should be avoided, as they fall below 40 FPS and the frame pacing will suffer.
At 4K, none of the presets are recommended for a satisfactory experience. Even the Low preset at 34 FPS is marginal, and the Medium preset's minimum of 22 FPS indicates that the game will stutter during busy scenes. The Ultra preset at 13 FPS is unplayable. The data suggests that users with this GPU should stick to 1080p Medium or 1440p Low for the best combination of playability and visual quality. The High preset at 1080p is also acceptable if the user prioritizes image quality over raw frame rate.
CPU Role
The Intel Core i7-14700F is a 20-core, 28-thread processor based on the Raptor Lake architecture, manufactured on a 10 nm process by Intel. It has a base clock of 2.10 GHz and a boost clock of 5.40 GHz, with a 33 MB shared L3 cache. In general compute benchmarks, this CPU is formidable: it scores 35122 in Cinebench R23 multicore and 4958 in single-core, with a Passmark multithread score of 41317. These numbers place it in the 91st percentile among all CPUs, and its nearest rivals include the AMD Ryzen 9 7900X and the AMD EPYC 7313P, both within 0.8% of its average score.
In Steamworld Build, however, the CPU's role is almost entirely passive. The game is a city builder, which typically involves simulation logic and AI pathfinding, but the measured frame rates are so low at higher resolutions that the GPU is clearly the limiting factor. At 1080p Low, the CPU can feed the GPU enough data to reach 101 FPS, but the frame rate does not improve beyond that because the graphics card cannot render faster. The CPU's 20 cores and 28 threads are vastly underutilized; the game likely uses only a few threads for its simulation, and the i7-14700F has ample headroom to handle those tasks without breaking a sweat.
The CPU's memory support for both DDR4 and DDR5 is irrelevant here, as the bottleneck is the GPU's 256.0 GB/s bandwidth. Even with a fast dual-channel memory configuration, the system cannot overcome the GPU's fill rate limitations. The benchmark data shows that the CPU is not a factor in the performance differences between settings; the frame rates scale almost entirely with the GPU's workload. The processor's 65 W TDP and efficient architecture mean it will not throttle or cause thermal issues, but it also cannot rescue the system from the RX 580's age. In this specific title, the Core i7-14700F is a high-end engine attached to a severely limited drivetrain, and the measured FPS reflects that mismatch.
Hardware Specifications
Intel Core i7-14700F
AMD Radeon RX 580
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core i7-14700F + AMD Radeon RX 580 in Steamworld Build
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 34.0 |
| 3840x2160 | Medium | 26.0 |
| 3840x2160 | High | 20.0 |
| 3840x2160 | Ultra | 13.0 |
| 2560x1440 | Low | 65.0 |
| 2560x1440 | Medium | 49.0 |
| 2560x1440 | High | 37.0 |
| 2560x1440 | Ultra | 25.0 |
| 1920x1080 | Low | 101.0 |
| 1920x1080 | Medium | 78.0 |
| 1920x1080 | High | 58.0 |
| 1920x1080 | Ultra | 39.0 |
Steamworld Build with ii7-14700F + Other GPUs
See how Steamworld Build performs with the same CPU but different graphics cards.
Steamworld Build with RX 580 + Other CPUs
See how Steamworld Build performs with the same GPU but different processors.
Other Games with ii7-14700F + RX 580
Explore FPS benchmarks for other games using this same hardware combination.