Steamworld Build
This combination delivers exceptional performance with an average of 184 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 57 | 85 | 113 | 148 |
| 1440p QHD | 108 | 160 | 214 | 280 |
| 1080p Full HD | 170 | 252 | 296 | 326 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Steamworld Build with AMD Ryzen 5 7400F + NVIDIA GeForce RTX 4090, In-Depth Analysis
Steamworld Build is a city builder that rarely stresses modern hardware, but the pairing of the AMD Ryzen 5 7400F with the NVIDIA GeForce RTX 4090 produces a fascinating dataset that reveals how this genre scales across resolutions and settings. The measured frames per second (FPS) show a configuration that is almost comically overpowered for the task, yet the performance deltas between presets and resolutions tell a clear story about where the bottlenecks actually lie in this particular engine.
Resolution Scaling
The FPS drop from 1080p to 4K is dramatic but follows an expected curve for a GPU-bound title at the highest settings. At High settings, the average FPS falls from 252 at 1920x1080 to 160 at 2560x1440, then to 85 at 3840x2160. That represents a 36.5% reduction from 1080p to 1440p, and a 46.9% further reduction from 1440p to 4K. The scaling is nearly linear in terms of pixel count, which indicates that the RTX 4090 is the primary limiting factor at these settings—the CPU is feeding frames fast enough that the GPU’s rasterization workload becomes the constraint.
At Low settings, the picture changes significantly. The average FPS at 1080p is 326, dropping to 280 at 1440p and 148 at 4K. The 1080p-to-1440p drop is only 14.1%, which is far less than the pixel count increase would suggest. This is a classic sign of a CPU bottleneck at lower resolutions: the Ryzen 5 7400F is maxing out its single-threaded throughput, preventing the RTX 4090 from stretching its legs. The 4K result at Low settings (148 FPS) is still far below the 1440p result, showing that even with minimal GPU load, the sheer pixel count at 4K eventually overwhelms the graphics card.
The Ultra preset tells a different story. At 1080p, the average FPS is 170, dropping to 108 at 1440p and 57 at 4K. The 4K result is a mere 33.5% of the 1080p figure, which is a steeper decline than the pixel count alone would predict. This suggests that Ultra settings introduce effects that disproportionately tax the GPU’s memory bandwidth or shading units, making the RTX 4090 work far harder per pixel than at High or Medium settings. The 4K Ultra result of 57 FPS is the only measured frame rate that dips below the 60 FPS threshold, highlighting that even this flagship GPU struggles with the most demanding preset at maximum resolution.
What the data reveals is a dual-bottleneck scenario. At 1080p and 1440p with Low or Medium settings, the CPU is the limiting factor, capping performance well below what the RTX 4090 could theoretically deliver. At 4K with High or Ultra settings, the GPU becomes the clear constraint, with FPS dropping proportionally to resolution. The Medium preset at 4K (113 FPS) versus High at 1440p (160 FPS) shows that resolution has a larger impact than settings quality, confirming that pixel throughput is the dominant variable in this game.
How This Combo Ranks
The AMD Ryzen 5 7400F and NVIDIA GeForce RTX 4090 combination ranks 111th out of 2924 tested combos in Steamworld Build. This places it in the top 3.8% of all configurations, which is impressive on paper but slightly lower than one might expect given the individual components. The RTX 4090 alone sits in the 88th percentile of all GPUs, while the Ryzen 5 7400F is in the 83rd percentile of all CPUs. The combo rank of 111 suggests that the pairing is not perfectly optimized for this specific game—there are 110 other combinations that achieve higher average FPS.
Looking at the CPU’s nearest rivals, the AMD Ryzen 7 PRO 6850H scores an average benchmark of 32812, which is 0.2% higher than the Ryzen 5 7400F’s 32750. The Intel Core i5-14600T is nearly identical at 32707 (0.1% lower), while the Intel Core Ultra 7 155H trails by 0.2% and the AMD Ryzen AI 7 PRO 360 trails by 0.3%. These differences are negligible in real-world gaming, meaning the 7400F’s rank is not being dragged down by CPU performance—it’s the game’s engine that doesn’t fully utilize the hardware.
For the GPU, the nearest rival is the Intel Arc Pro A60 with an average score of 60326, essentially tied with the RTX 4090’s 60347 (0% delta). The AMD Radeon Pro Vega 48 is 0.3% lower, while the AMD Radeon Pro W6600M is 2.5% lower and the AMD Radeon PRO V710 is 2.9% higher. These rival comparisons are based on synthetic benchmarks, not game-specific FPS, so they don’t directly translate to Steamworld Build performance. However, they do confirm that the RTX 4090 is a top-tier part with few peers in raw compute.
The rank of 111 out of 2924 is respectable but not dominant. In a game like Steamworld Build, which is a city builder with moderate graphical demands, the bottleneck is often the game’s simulation logic rather than the GPU. This explains why the combo doesn’t crack the top 50—the Ryzen 5 7400F’s 6 cores and 12 threads are sufficient, but they don’t provide the massive multi-threaded headroom that some other CPUs might offer for city-building simulations.
Settings Recommendations
The measured data provides clear guidance on which preset to use for the best experience. At 1080p, the Medium preset delivers an average of 296 FPS with a minimum of 252 FPS and a maximum of 340 FPS. This is remarkably smooth, and the minimum frame rate is still far above any display’s refresh rate. The High preset at 1080p (252 FPS) is also excellent, but it offers no meaningful advantage over Medium given that most monitors cap out at 240 Hz or lower.
At 1440p, the High preset is the sweet spot. It delivers 160 FPS average, which is more than enough for high-refresh-rate gaming, while the Ultra preset drops to 108 FPS—still playable but not worth the visual fidelity trade-off for most users. The Medium preset at 1440p (214 FPS) is overkill for most displays and doesn’t provide a significant visual improvement over High in a city builder where you’re often zoomed out.
At 4K, the situation is more nuanced. The Medium preset delivers 113 FPS average with a minimum of 96 FPS and a maximum of 130 FPS. This is the only 4K preset that maintains a consistent frame rate above 60 FPS, making it the recommended choice for 4K users. The High preset at 4K (85 FPS) is playable but leaves little headroom for dips during heavy simulation moments, while the Ultra preset (57 FPS) falls below the 60 FPS threshold and should be avoided.
The data suggests that Medium at 4K or High at 1440p provides the best balance of visual quality and performance. For users with 240 Hz monitors at 1080p, the Medium preset’s 296 FPS average is the optimal choice, as it provides the highest minimum frame rate (252 FPS) among all tested settings at that resolution.
Measured FPS Breakdown
At 1920x1080, the full range of settings shows a clear hierarchy. Low produces an average of 326 FPS, which is the highest score in the entire dataset. Medium follows at 296 FPS (min 252 FPS, max 340 FPS), then High at 252 FPS, and finally Ultra at 170 FPS. The gap between Low and Ultra is 47.9%, indicating that Ultra settings impose a significant GPU load even at 1080p. The minimum FPS for Medium at 1080p (252 FPS) is higher than the average FPS for High at the same resolution, which suggests that Medium is the most stable preset at 1080p.
At 2560x1440, the pattern repeats but with lower absolute numbers. Low delivers 280 FPS, Medium delivers 214 FPS (min 182 FPS, max 246 FPS), High delivers 160 FPS, and Ultra delivers 108 FPS. The drop from 1080p to 1440p is 14.1% for Low, 27.7% for Medium, 36.5% for High, and 36.5% for Ultra. The similar percentage drops for High and Ultra indicate that these settings are GPU-bound at 1440p, while Low and Medium are still partially CPU-limited.
At 3840x2160, the GPU becomes the dominant constraint across all settings. Low averages 148 FPS, Medium averages 113 FPS (min 96 FPS, max 130 FPS), High averages 85 FPS, and Ultra averages 57 FPS. The 4K Low result is interesting—it’s only 47.1% lower than the 1080p Low result, which is less than the pixel count difference would suggest. This implies that even at Low settings, the CPU is still providing some headroom at 4K. The 4K Ultra result of 57 FPS is the only sub-60 FPS score in the entire dataset, making it the least desirable configuration.
FAQ
Q: Is the RTX 4090 overkill for Steamworld Build?
A: The data suggests yes. At 1080p with Low settings, the combo achieves 326 FPS, which is far beyond any display’s refresh rate. Even at 4K with High settings, the average of 85 FPS is more than sufficient for smooth gameplay. The RTX 4090’s 24 GB of GDDR6X memory and 82.58 TFLOPS of FP32 performance are far more than this city builder requires.
Q: What is the best 4K preset for this combo?
A: The Medium preset at 3840x2160 delivers an average of 113 FPS with a minimum of 96 FPS, making it the only 4K setting that consistently stays above 60 FPS. The High preset at 85 FPS is playable, but the Ultra preset’s 57 FPS average falls below the 60 FPS threshold.
Q: Does the CPU bottleneck the GPU in this game?
A: At 1080p with Low settings, the average of 326 FPS suggests a CPU limit, as the RTX 4090 could theoretically push higher frame rates. The Ryzen 5 7400F’s 6 cores and 12 threads, with a boost clock of 4.70 GHz, are sufficient for most games, but Steamworld Build’s simulation logic may not scale well beyond 6 cores.
Q: How does the Ryzen 5 7400F compare to its nearest rivals?
A: The AMD Ryzen 7 PRO 6850H is 0.2% faster in average benchmark score (32812 vs 32750), while the Intel Core i5-14600T is 0.1% slower (32707). The Intel Core Ultra 7 155H and AMD Ryzen AI 7 PRO 360 are 0.2% and 0.3% slower, respectively. These differences are negligible for gaming.
Q: What is the minimum FPS recorded in the dataset?
A: The lowest minimum FPS is 96 FPS, recorded at 3840x2160 with Medium settings. This is still well above the 60 FPS threshold, indicating that the combo never stutters or drops to unplayable levels in any tested configuration.
Q: How does the combo rank overall?
A: The AMD Ryzen 5 7400F and NVIDIA GeForce RTX 4090 combination ranks 111th out of 2924 tested combos in Steamworld Build, placing it in the top 3.8% of all configurations.
CPU Role
The AMD Ryzen 5 7400F is a 6-core, 12-thread processor based on the Zen 4 architecture, codenamed Raphael. It has a base clock of 3.70 GHz and a boost clock of 4.70 GHz, with a 65 W TDP. The CPU features 64 KB of L1 cache per core, 1 MB of L2 cache per core, and 32 MB of shared L3 cache. Its benchmark scores show strong single-threaded performance—3072 in Cinebench R23 single-core and 3689 in Passmark single-thread—which is crucial for games that rely on a primary simulation thread.
In Steamworld Build, the CPU’s role is evident from the FPS scaling. At 1080p Low settings, the combo achieves 326 FPS, but this is likely CPU-limited because the RTX 4090 is far more capable. The fact that the 1080p-to-1440p drop at Low settings is only 14.1% (from 326 to 280 FPS) confirms that the CPU is the bottleneck at these lower resolutions. The Ryzen 5 7400F’s 6 cores are adequate for the game’s simulation, but the 12 threads don’t provide the same multi-threaded headroom as a 16-core processor might.
The CPU’s 83rd percentile ranking among all CPUs, with an average benchmark score of 32750, places it slightly below the AMD Ryzen 7 PRO 6850H (32812) but above the Intel Core i5-14600T (32707). In a city builder like Steamworld Build, where the simulation tick rate can be a limiting factor, the 7400F’s single-thread performance is more important than its multi-thread capabilities. The Cinebench R23 single-core score of 3072 is strong, indicating that the CPU can handle the game’s main thread without becoming a bottleneck at higher resolutions.
At 4K, the CPU’s role diminishes, and the GPU takes over as the primary constraint. The 4K Low result of 148 FPS is still high, suggesting that the CPU can feed frames at 4K without issue. The 4K Ultra result of 57 FPS is entirely GPU-bound, as the RTX 4090’s 16384 shading units and 512 texture mapping units are taxed by the Ultra preset’s effects. The Ryzen 5 7400F’s 5 nm process node and 6,570 million transistors provide efficient processing, but the game’s engine doesn’t appear to leverage the CPU’s full potential beyond 6 cores.
Hardware Specifications
AMD Ryzen 5 7400F
NVIDIA GeForce RTX 4090
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 7400F + NVIDIA GeForce RTX 4090 in Steamworld Build
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 148.0 |
| 3840x2160 | Medium | 113.0 |
| 3840x2160 | High | 85.0 |
| 3840x2160 | Ultra | 57.0 |
| 2560x1440 | Low | 280.0 |
| 2560x1440 | Medium | 214.0 |
| 2560x1440 | High | 160.0 |
| 2560x1440 | Ultra | 108.0 |
| 1920x1080 | Low | 326.0 |
| 1920x1080 | Medium | 296.0 |
| 1920x1080 | High | 252.0 |
| 1920x1080 | Ultra | 170.0 |
Steamworld Build with Ryzen 5 7400F + Other GPUs
See how Steamworld Build performs with the same CPU but different graphics cards.
Steamworld Build with RTX 4090 + Other CPUs
See how Steamworld Build performs with the same GPU but different processors.
Other Games with Ryzen 5 7400F + RTX 4090
Explore FPS benchmarks for other games using this same hardware combination.