Steamworld Build
This combination provides smooth gameplay with an average of 99 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 29 | 43 | 58 | 76 |
| 1440p QHD | 55 | 82 | 110 | 143 |
| 1080p Full HD | 87 | 129 | 172 | 198 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Steamworld Build with AMD Ryzen 5 2600 + NVIDIA GeForce RTX 4060, In-Depth Analysis
The AMD Ryzen 5 2600 and NVIDIA GeForce RTX 4060 pairing delivers a solid 1080p experience in Steamworld Build, but the data shows a sharp performance cliff as resolution climbs. This combo ranks 2054th out of 3706 tested combinations, placing it in the lower-middle of the pack. The measured FPS reveals a system that is clearly capable at lower resolutions but becomes increasingly constrained at 4K, where even medium settings dip below 60 FPS.
Settings Recommendations
The measured data points to Medium as the optimal preset for this hardware combination across all resolutions. At 1080p, Medium delivers 172 FPS average, which is only 26 FPS below the Low preset's 198 FPS but offers substantially better visual quality. The jump from Medium to High at 1080p costs 43 FPS (172 to 129), which is a significant drop for what is typically a modest visual gain in a city builder. The Ultra preset at 1080p falls to 87 FPS, which is still playable but represents a 49% reduction from Medium.
At 1440p, the Medium preset again provides the best balance, hitting 110 FPS average with a minimum of 93 FPS. This keeps the experience well above the 60 FPS threshold while maintaining smooth performance even during busy city scenes. High at 1440p drops to 82 FPS, and while playable, it sacrifices 28 FPS for the higher preset. The 4K results make the recommendation clearer: Medium at 58 FPS average with a 49 FPS minimum is the only preset that approaches playability, as High falls to 43 FPS and Ultra drops to 29 FPS.
For users with 1080p displays, High is a viable alternative if visual fidelity takes priority, as the 129 FPS average still leaves ample headroom. However, the 43 FPS difference between Medium and High suggests that the GPU is doing significant work at the higher preset. The data indicates that Medium is the sweet spot, providing a comfortable margin above 60 FPS at 1080p and 1440p while remaining the only preset that stays close to 60 FPS at 4K.
CPU Role
The Ryzen 5 2600 brings 6 cores and 12 threads to the table, with a base clock of 3.40 GHz and a boost clock of 3.90 GHz. This Zen-based processor from the 2000 series has been on the market since 2018, and its benchmark scores reflect its age. The CPU's multithreaded performance, as measured by PassMark, comes in at 13160, with a single-thread score of 2239. These numbers place the processor at the 75th percentile among all CPUs, meaning it outperforms about three-quarters of the processors in the database.
The game's results suggest that Steamworld Build does not heavily tax the CPU at lower resolutions. At 1080p, the difference between Low and Medium settings is only 26 FPS (198 to 172), while the jump from Medium to High costs 43 FPS. This pattern indicates that the GPU becomes the primary bottleneck as settings increase, while the CPU handles the simulation and logic aspects of the city builder without significant strain. The 1440p results reinforce this interpretation: Low hits 143 FPS, and Medium reaches 110 FPS, showing that the CPU can feed the GPU adequately at these settings.
The Ryzen 5 2600's 16 MB of shared L3 cache and dual-channel DDR4 memory support are adequate for this game's demands. The CPU's 75th percentile ranking places it near rivals like the Intel Core Ultra 5 228V, which scores 0.2% higher, and the Intel Core i9-11900H, which is 0.5% ahead. This indicates that while the 2600 is not a top-tier processor, it is by no means a weak link in this configuration. The data suggests that the CPU is not the limiting factor in most scenarios, as the FPS scaling follows GPU-bound patterns typical of city builders where draw calls and object counts matter more than raw compute.
GPU Role
The RTX 4060 is built on the Ada Lovelace architecture with 8 GB of GDDR6 memory on a 128-bit bus, providing 272.0 GB/s of bandwidth. The GPU's boost clock reaches 2460 MHz, and its 3072 shading units deliver 15.11 TFLOPS of FP32 performance. These specifications place the card at the 61st percentile among all GPUs, with nearest rivals including the AMD Radeon 780M (0.3% higher score) and the AMD Radeon Pro 560 (0.5% lower score).
The measured FPS data shows a clear GPU bottleneck emerging at higher resolutions and settings. At 1080p, the card pushes 198 FPS on Low and 172 FPS on Medium, indicating substantial headroom. The drop to 129 FPS on High and 87 FPS on Ultra shows the GPU's rendering load increasing dramatically with preset quality. The 4K results tell a more concerning story: 76 FPS on Low, 58 FPS on Medium, 43 FPS on High, and 29 FPS on Ultra. This scaling pattern demonstrates that the 8 GB VRAM and 128-bit memory bus become limiting factors at 4K, particularly at higher presets where texture memory and bandwidth demands increase.
The GPU's 118.1 GPixel/s pixel rate and 236.2 GTexel/s texture rate are sufficient for 1080p and 1440p gaming, but the 4K Ultra result of 29 FPS shows the card's limitations. The 17 Gbps effective memory speed cannot compensate for the narrow 128-bit bus when pushing 8.3 million pixels per frame at 4K. For a city builder like Steamworld Build, where the camera often shows large portions of the map, the GPU must render many buildings and objects simultaneously, which explains the steep performance drop at 4K.
How This Combo Ranks
The combination of the Ryzen 5 2600 and RTX 4060 achieves a rank of 2054 out of 3706 tested combos, placing it in the 55th percentile overall. This mid-pack ranking reflects the mismatch between the aging CPU and the relatively modern GPU. The CPU's 75th percentile standing and the GPU's 61st percentile standing do not combine to produce a top-tier gaming system, as the older processor can bottleneck the newer graphics card in certain scenarios.
This ranking suggests that while the combo is capable of delivering playable frame rates at 1080p and 1440p, it falls behind many other pairings in the database. The 2054th position indicates that roughly 45% of tested combos perform better, which is expected given the CPU's age. The data shows that the system's overall performance is constrained more by the processor than the graphics card, particularly at lower resolutions where the GPU is not fully utilized. At 1080p Low, the 198 FPS result shows the theoretical ceiling of this pairing, but real-world usage at Medium or High settings brings the performance down to more typical levels.
Resolution Scaling
The FPS scaling from 1080p to 4K reveals important information about the limiting component. At Medium settings, the average FPS drops from 172 at 1080p to 110 at 1440p (a 36% reduction), then to 58 at 4K (a 47% further reduction). This scaling pattern is characteristic of a GPU-bound scenario, where the increased pixel count directly impacts rendering performance. The 1440p to 4K drop is proportionally larger than the 1080p to 1440p drop, which aligns with the GPU's memory bandwidth limitations at higher resolutions.
At Low settings, the scaling is even more dramatic: 198 FPS at 1080p, 143 FPS at 1440p, and 76 FPS at 4K. The 1080p to 1440p reduction of 28% suggests that even at low settings, the GPU is working harder to fill more pixels. The 1440p to 4K drop of 47% further confirms the GPU as the primary bottleneck. The High preset shows a similar pattern with 129 FPS at 1080p, 82 FPS at 1440p, and 43 FPS at 4K. These results indicate that the RTX 4060 is the limiting component at higher resolutions, while the CPU's influence is more pronounced at lower resolutions where frame rates exceed 150 FPS.
Measured FPS Breakdown
At 1920x1080, the system delivers its best performance. The Low preset achieves 198 FPS average, while Medium hits 172 FPS with a minimum of 147 FPS and maximum of 198 FPS. High settings reduce the average to 129 FPS, and Ultra drops to 87 FPS. These numbers show that the combo can handle 1080p gaming with ease, maintaining well above 60 FPS even at the highest preset.
Moving to 2560x1440, the performance remains strong but shows the GPU's workload increasing. Low settings produce 143 FPS average, Medium delivers 110 FPS with a minimum of 93 FPS and maximum of 126 FPS. High settings drop to 82 FPS, and Ultra falls to 55 FPS. The Medium preset at 1440p is the best balance of visual quality and performance, with the minimum FPS staying above 90.
At 3840x2160, the system struggles to maintain playable frame rates at higher presets. Low settings achieve 76 FPS average, which is playable. Medium drops to 58 FPS with a minimum of 49 FPS, putting it just below the 60 FPS threshold. High settings fall to 43 FPS, and Ultra drops to 29 FPS, making these presets unsuitable for smooth gameplay. The 4K results clearly show the GPU's limitations, with only Low settings providing a comfortable margin above 60 FPS.
Hardware Specifications
AMD Ryzen 5 2600
NVIDIA GeForce RTX 4060
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 2600 + NVIDIA GeForce RTX 4060 in Steamworld Build
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 76.0 |
| 3840x2160 | Medium | 58.0 |
| 3840x2160 | High | 43.0 |
| 3840x2160 | Ultra | 29.0 |
| 2560x1440 | Low | 143.0 |
| 2560x1440 | Medium | 110.0 |
| 2560x1440 | High | 82.0 |
| 2560x1440 | Ultra | 55.0 |
| 1920x1080 | Low | 198.0 |
| 1920x1080 | Medium | 172.0 |
| 1920x1080 | High | 129.0 |
| 1920x1080 | Ultra | 87.0 |
Steamworld Build with Ryzen 5 2600 + Other GPUs
See how Steamworld Build performs with the same CPU but different graphics cards.
Steamworld Build with RTX 4060 + Other CPUs
See how Steamworld Build performs with the same GPU but different processors.
Other Games with Ryzen 5 2600 + RTX 4060
Explore FPS benchmarks for other games using this same hardware combination.