Rust
This combination provides smooth gameplay with an average of 88 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 34 | 44 | 49 | 74 |
| 1440p QHD | 59 | 74 | 88 | 130 |
| 1080p Full HD | 84 | 106 | 125 | 192 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Rust with AMD Ryzen 7 9700X + NVIDIA GeForce RTX 4060 Ti 8 GB, In-Depth Analysis
The AMD Ryzen 7 9700X and NVIDIA GeForce RTX 4060 Ti 8 GB combination delivers playable frame rates at 1080p and 1440p in Rust, but the data shows a sharp performance cliff at 4K that points squarely at the GPU as the limiting factor. At 1080p Low, the combo achieves 192.1 FPS, which is strong for a survival title, but that figure collapses to 34 FPS at 4K Ultra. The scaling pattern across all settings reveals a system where the CPU has ample headroom, while the graphics card’s 8 GB VRAM and 128-bit memory interface become bottlenecks as resolution and detail levels rise.
Resolution Scaling
The measured FPS data shows a consistent and predictable drop as resolution increases from 1920x1080 to 3840x2160. At Low settings, the average frame rate falls from 192.1 FPS at 1080p to 129.7 FPS at 1440p, a reduction of 62.4 FPS, and then to 74.4 FPS at 4K. That 4K figure represents only 38.7% of the 1080p performance, which indicates the rendering pipeline is becoming heavily constrained at higher pixel counts. The pattern is similar at Medium settings, where 125.4 FPS at 1080p drops to 88.1 FPS at 1440p and then to 49.3 FPS at 4K.
The High preset shows the same trend, with 105.8 FPS at 1080p, 73.8 FPS at 1440p, and 44.2 FPS at 4K. The Ultra preset is the most demanding, starting at 84 FPS at 1080p, falling to 59 FPS at 1440p, and bottoming out at 34 FPS at 4K. The gap between 1080p and 4K widens as settings increase, from a 117.7 FPS difference at Low to a 50 FPS difference at Ultra. This behavior suggests that at lower settings, the CPU can still feed the GPU enough data to keep it busy, but at higher settings and resolutions, the GPU’s memory bandwidth and capacity become the primary limit. The 4K Ultra result of 34 FPS is below the threshold for smooth gameplay, and even 4K Low at 74.4 FPS is marginal for competitive play, indicating this combo is best suited for 1080p or 1440p gaming in Rust.
CPU Role
The Ryzen 7 9700X is a Zen 5 architecture processor with 8 cores and 16 threads, running at a base clock of 3.80 GHz and a boost clock of 5.50 GHz. Its benchmark results show strong single-thread and multi-thread performance, with a Cinebench R23 single-core score of 4459 and a multi-core score of 31588. The CPU’s 32 MB shared L3 cache and 89.6 GB/s memory bandwidth provide ample data throughput for a game like Rust, which relies on complex world simulation and physics. In the measured results, the CPU’s capability is evident at 1080p Low, where the combo reaches 192.1 FPS, a figure that is unlikely to be CPU-limited given the relatively modest clock speed requirements of the game at that setting.
At 4K, however, the CPU’s role diminishes. The FPS drop from 192.1 at 1080p Low to 74.4 at 4K Low is almost entirely attributable to the GPU’s inability to process pixels fast enough, not a lack of CPU processing power. The CPU’s 3DMark scores support this interpretation: it scores 9824 in the 16-thread test and 9771 in the max-thread test, showing strong scaling across cores, which is beneficial for Rust’s server-side and client-side simulation. The processor’s percentile rank of 89 among all CPUs indicates it is in the top tier for general performance, and its nearest rivals, such as the Intel Core i5-14500HX with a deltaPct of 0.2, are within a fraction of a percent in average benchmark score, confirming the CPU is not a weak point in this pairing. In practical terms, the data shows the CPU can comfortably drive high frame rates at lower resolutions, but it is the GPU that dictates the ceiling at 4K.
GPU Role
The RTX 4060 Ti 8 GB is built on the Ada Lovelace architecture with a base clock of 2310 MHz and a boost clock of 2535 MHz. Its memory configuration includes 8 GB of GDDR6 on a 128-bit bus, providing 288.0 GB/s of bandwidth. These specifications are directly relevant to the measured results, particularly at higher resolutions. The 8 GB VRAM capacity is a critical factor: at 4K Ultra settings, Rust’s texture and asset demands likely exceed this capacity, causing the GPU to rely on slower memory transfers, which explains the 34 FPS result. The 128-bit memory bus also limits bandwidth, and the data shows this becomes more pronounced as resolution increases.
The GPU’s benchmark score in 3DMark Steel Nomad DX12 is 2913, and its percentile rank among all GPUs is 17, which is low, indicating that this card sits in the lower tier of current graphics hardware. Its nearest rivals include the NVIDIA GeForce RTX 4060 Ti 16 GB with a deltaPct of 0.2, meaning the two cards perform nearly identically in that specific test, despite the 16 GB model having double the memory. This suggests that in synthetic benchmarks, the extra VRAM does not translate to a raw performance advantage, but in a game like Rust at 4K, the memory capacity difference could be the deciding factor between playable and unplayable frame rates. The GPU’s texture rate of 344.8 GTexel/s and pixel rate of 121.7 GPixel/s are sufficient for 1080p, but the data shows a clear degradation at 4K, where the card’s 22.06 TFLOPS of FP32 compute is not enough to maintain high frame rates with detailed settings. The GPU is the bottleneck in this combination, and the measured FPS values reflect its limitations at higher resolutions.
Measured FPS Breakdown
The measured FPS data provides a complete picture across four settings presets and three resolutions. At 1920x1080, the results are: Low 192.1 FPS, Medium 125.4 FPS, High 105.8 FPS, and Ultra 84 FPS. These numbers show that even at Ultra settings, the combo maintains a playable frame rate above 60 FPS, making 1080p the ideal resolution for this hardware. The drop from Low to Medium is 66.7 FPS, which is larger than the drop from Medium to High at 19.6 FPS, suggesting diminishing returns from higher settings as the GPU becomes more strained.
At 2560x1440, the data shows: Low 129.7 FPS, Medium 88.1 FPS, High 73.8 FPS, and Ultra 59 FPS. The Ultra preset at 1440p falls just below the 60 FPS threshold, indicating that users may need to dial back to High for a smoother experience. The difference between Low and Ultra at 1440p is 70.7 FPS, which is proportionally similar to the 1080p gap. At 3840x2160, the results are: Low 74.4 FPS, Medium 49.3 FPS, High 44.2 FPS, and Ultra 34 FPS. Only the Low preset at 4K reaches a playable frame rate, and even that is marginal. The Ultra preset at 4K is 50 FPS below the 1080p Ultra result, highlighting the severe impact of resolution scaling on this GPU. The data consistently shows that the RTX 4060 Ti 8 GB is most comfortable at 1080p, capable at 1440p with reduced settings, and inadequate for 4K beyond Low presets.
How This Combo Ranks
In the benchmark database, this specific combination of the AMD Ryzen 7 9700X and NVIDIA GeForce RTX 4060 Ti 8 GB ranks 688 out of 1717 tested combos in Rust. This places it in the upper half of all configurations, but not near the top tier. The rank reflects the balance between the high-performing CPU and the mid-range GPU. The CPU’s percentile rank of 89 among all CPUs is significantly higher than the GPU’s percentile rank of 17, which creates an imbalance where the processor is capable of much more than the graphics card can deliver at higher resolutions. This is evident in the measured FPS data, where the CPU can push 192 FPS at 1080p Low, but the GPU limits the combo to 34 FPS at 4K Ultra. The rank of 688 out of 1717 suggests that there are many other combinations that offer better overall performance in Rust, likely those with more powerful GPUs paired with similar or slightly slower CPUs. However, for 1080p gaming, this combo is well above average, as the rank is pulled down by the 4K results. The data indicates that users who prioritize high refresh rates at 1080p will find this pairing effective, but those targeting 4K should look at higher-tier graphics cards.
FAQ
Q: What is the best resolution for this combo in Rust?
A: The data shows 1920x1080 is the best resolution, with all settings presets achieving above 60 FPS, including 84 FPS at Ultra. At 2560x1440, only Low, Medium, and High presets stay above 60 FPS, while Ultra drops to 59 FPS.
Q: How does the RTX 4060 Ti 8 GB compare to the 16 GB version?
A: In the 3DMark Steel Nomad DX12 benchmark, the 8 GB model scores 2913, while the 16 GB model scores 2907, a deltaPct of 0.2. They perform nearly identically in that test, but the 8 GB card’s memory capacity may limit performance in VRAM-heavy scenarios like 4K gaming.
Q: Is the CPU or GPU the bottleneck at 4K?
A: The GPU is the limiting factor at 4K. The CPU’s benchmark scores are strong, with a Cinebench R23 multi-core score of 31588, but the GPU’s low percentile rank of 17 and the sharp FPS drop at 4K indicate the graphics card cannot keep up with the pixel processing demands.
Q: What is the average FPS at 1440p High settings?
A: The measured average FPS at 2560x1440 with High settings is 73.8 FPS, which is above the 60 FPS threshold for smooth gameplay.
Q: Does the CPU’s 8-core configuration help in Rust?
A: The CPU has 8 cores and 16 threads, with a 3DMark 16-thread score of 9824, indicating strong multi-threaded performance. This is beneficial for Rust’s simulation workload, but the data shows the GPU becomes the bottleneck at higher resolutions.
Q: Can this combo handle 4K Low settings?
A: Yes, the measured average FPS at 3840x2160 with Low settings is 74.4 FPS, which is playable, but it is the only 4K preset that exceeds 60 FPS. Higher presets at 4K fall below 50 FPS.
Settings Recommendations
Based on the measured FPS data, the optimal settings for this combo depend on the target resolution and desired frame rate. For 1080p gaming, the Ultra preset at 84 FPS provides the best visual quality while maintaining a smooth experience well above the 60 FPS threshold. If a higher refresh rate monitor is in use, the Low preset at 192.1 FPS offers the maximum performance, but this sacrifices visual fidelity. The Medium preset at 125.4 FPS strikes a balance between quality and speed, making it a strong recommendation for competitive play. For 1440p, the High preset at 73.8 FPS is the best choice, as it stays above 60 FPS while delivering good detail. The Ultra preset at 59 FPS is marginally below the target, so users should stick to High for consistency. At 4K, only the Low preset at 74.4 FPS is playable, but this requires significant visual compromises. The Medium, High, and Ultra presets at 4K yield 49.3, 44.2, and 34 FPS respectively, all of which are below the playable threshold. The data suggests that users should prioritize 1080p or 1440p with this combo, and if 4K is necessary, they must accept Low settings and the associated reduction in visual quality. The best overall experience per the measured rows is 1080p Ultra at 84 FPS, as it offers the highest settings with a frame rate that is still comfortable for most gaming scenarios.
Hardware Specifications
AMD Ryzen 7 9700X
NVIDIA GeForce RTX 4060 Ti 8 GB
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 7 9700X + NVIDIA GeForce RTX 4060 Ti 8 GB in Rust
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 74.4 |
| 3840x2160 | Medium | 49.3 |
| 3840x2160 | High | 44.2 |
| 3840x2160 | Ultra | 34.0 |
| 2560x1440 | Low | 129.7 |
| 2560x1440 | Medium | 88.1 |
| 2560x1440 | High | 73.8 |
| 2560x1440 | Ultra | 59.0 |
| 1920x1080 | Low | 192.1 |
| 1920x1080 | Medium | 125.4 |
| 1920x1080 | High | 105.8 |
| 1920x1080 | Ultra | 84.0 |
Rust with RTX 4060 Ti 8 GB + Other CPUs
See how Rust performs with the same GPU but different processors.
Other Games with Ryzen 7 9700X + RTX 4060 Ti 8 GB
Explore FPS benchmarks for other games using this same hardware combination.