Rust

Rust

AVERAGE FPS
79
good

This combination provides smooth gameplay with an average of 79 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 28 38 46 71
1440p QHD 49 67 81 117
1080p Full HD 75 97 112 169

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 71
3840x2160 Medium 46
3840x2160 High 38
3840x2160 Ultra 28
2560x1440 Low 117
2560x1440 Medium 81
2560x1440 High 67
2560x1440 Ultra 49
1920x1080 Low 169
1920x1080 Medium 112
1920x1080 High 97
1920x1080 Ultra 75

Rust with AMD Ryzen 5 5500 + AMD Radeon RX 9060 XT 8 GB, In-Depth Analysis

The AMD Ryzen 5 5500 and AMD Radeon RX 9060 XT 8 GB combination delivers a fundamentally playable experience in Rust, but the data reveals a system that is heavily constrained by the graphics card at higher settings and resolutions. The measured frame rates show a clear hierarchy: performance scales dramatically with lower settings, while the CPU keeps pace well enough to avoid becoming the primary bottleneck in most scenarios. This analysis breaks down the measured FPS data to explain how each component contributes to the final result.

FAQ

Q: What is the best performance this combo achieves in Rust?

A: The highest measured average FPS is 169.4 at 1920x1080 with Low settings. This drops to 74.7 at the same resolution with Ultra settings, showing a significant performance cost for maximum visual quality.

Q: How does the CPU compare to its direct rivals?

A: The Ryzen 5 5500 has an average benchmark score of 20875, placing it in the 79th percentile of all CPUs. Its nearest rival, the Intel Core i5-12500, scores 20897, a delta of -0.1%, meaning the Ryzen is effectively tied with it in overall synthetic performance.

Q: Is the GPU's 8 GB memory sufficient for 4K gaming?

A: At 3840x2160, the average FPS at High settings is 37.8 and at Ultra is 27.6. These results indicate the 8 GB frame buffer and GPU compute power are insufficient for smooth 4K gameplay, as the frame rates fall below the generally accepted 60 FPS threshold.

Q: What is the difference between Low and Ultra settings at 1440p?

A: At 2560x1440, the Low preset yields an average of 117.3 FPS, while Ultra drops to 48.6 FPS. This represents a 68.7 FPS difference, or a 58.6% reduction in performance, when moving from the lowest to the highest quality settings.

Q: Where does this combo rank among all tested hardware in Rust?

A: The combination ranks 873rd out of 1717 total combos tested for Rust, placing it slightly above the median of the tested database.

Q: Does the CPU hold the system back at 1080p?

A: The data suggests the CPU is adequate. At 1080p Low, the system reaches 169.4 FPS, which is a high frame rate. However, the 3DMark single-thread score of 836 and the multi-thread score of 5411 indicate the CPU is a solid performer, but the GPU is still the limiting factor at higher settings.

CPU Role

The AMD Ryzen 5 5500 is a 6-core, 12-thread processor based on the Zen 3 architecture. Its base clock is 3.60 GHz and it boosts up to 4.20 GHz. In Rust, a game known for its single-threaded server logic and physics, the processor's single-core performance is critical. The 3DMark single-thread score of 836 and the Cinebench R23 single-core score of 2319 are modest figures. These scores suggest the CPU can handle the game's logic without being a severe bottleneck in most scenarios, but it does not provide a massive headroom for very high frame rates.

The multi-threaded capabilities are more robust. The Cinebench R23 multi-core score of 16429 and the 3DMark max-thread score of 5411 show that the CPU can handle background tasks and the game's rendering threads. The Ryzen 5 5500's average benchmark score of 20875 places it in the 79th percentile of all CPUs, with its nearest rival, the Intel Core i5-12500, being just 0.1% faster. This indicates the CPU is a competent mid-range performer. In the measured Rust data, the CPU does not appear to be the primary limiter. At 1080p Low, the system achieves 169.4 FPS, suggesting the CPU can push frames well above 100 FPS when the GPU is not stressed.

However, the CPU's performance ceiling is visible when comparing the 1080p results. The jump from Low (169.4 FPS) to Medium (111.5 FPS) is a 57.9 FPS drop, which is primarily a GPU limitation. The CPU's role becomes more apparent in the consistency of the scaling, but the data shows no scenario where the CPU is clearly unable to feed the GPU. The 65W TDP and the 16 MB L3 cache are sufficient for the game's demands. The CPU's percentile rank of 79 indicates it is a better-than-average performer, which aligns with the observed frame rates in Rust.

GPU Role

The AMD Radeon RX 9060 XT 8 GB is based on the RDNA 4.0 architecture and is the clear performance driver in this combination. It features a boost clock of 3130 MHz and a game clock of 2530 MHz. The 8 GB of GDDR6 memory on a 128-bit bus provides a bandwidth of 322.3 GB/s. This memory configuration is a key factor in the GPU's performance profile. The GPU's 2048 shading units and 64 ROPs are responsible for the pixel-pushing power, which is the primary constraint at higher resolutions and settings.

The GPU's role is evident in the measured FPS data. At 1080p, the GPU can deliver high frame rates: 169.4 FPS on Low and 97.2 FPS on High. This shows the GPU is capable of excellent performance when the resolution and settings are not overwhelming. However, the GPU's limitations become stark at 4K. At 3840x2160, even the Low preset yields only 70.8 FPS, and the High preset drops to 37.8 FPS. The Ultra preset at 4K is nearly unplayable at 27.6 FPS. This indicates that the 8 GB memory and the GPU's compute resources are insufficient for the pixel workload of 4K in Rust.

The scaling from 1080p to 1440p also shows the GPU's load. At High settings, the frame rate drops from 97.2 FPS at 1080p to 67.2 FPS at 1440p, a 30 FPS reduction. This is a significant drop, showing that the GPU is the primary bottleneck as the resolution increases. The GPU's percentile rank of 50 places it exactly at the median of all GPUs, which is consistent with its performance being the limiting factor in this system. The GPU's 322.3 GB/s bandwidth is adequate for 1080p and 1440p, but it struggles to maintain the data throughput required for 4K textures and geometry.

Measured FPS Breakdown

The measured data provides a clear picture of performance across three resolutions and four settings presets.

At 1920x1080, the performance spans a wide range. The Low preset delivers an average of 169.4 FPS, making it the fastest configuration tested. The Medium preset drops to 111.5 FPS, and the High preset yields 97.2 FPS. The Ultra preset is the slowest at 1080p, with an average of 74.7 FPS. This shows a 94.7 FPS difference between the lowest and highest settings, demonstrating the GPU's sensitivity to graphical fidelity.

At 2560x1440, the frame rates decrease across the board. The Low preset still provides a smooth experience at 117.3 FPS. The Medium preset falls to 81.1 FPS, and the High preset drops to 67.2 FPS. The Ultra preset is the only one that falls below the 60 FPS threshold, with an average of 48.6 FPS. This resolution represents a reasonable target for the combo, as the Low and Medium presets offer playable frame rates.

At 3840x2160, the performance is heavily constrained. The Low preset is the only one that provides a playable frame rate at 70.8 FPS. The Medium preset drops to 46.1 FPS, and the High preset falls to 37.8 FPS. The Ultra preset is the slowest overall, with an average of just 27.6 FPS. This resolution is not suitable for this hardware combination, as even the Low preset does not provide a comfortable margin above 60 FPS.

Resolution Scaling

The resolution scaling data shows a clear trend: the GPU is the limiting component as resolution increases. From 1080p to 1440p at Low settings, the frame rate drops from 169.4 FPS to 117.3 FPS, a 30.7% reduction. This is a significant drop, but it still leaves the performance in a playable range. The same transition at High settings shows a drop from 97.2 FPS to 67.2 FPS, a 30.9% reduction. This consistency suggests the GPU's fill rate and bandwidth are the primary constraints.

From 1440p to 4K, the drops become more severe. At Low settings, the frame rate goes from 117.3 FPS to 70.8 FPS, a 39.6% reduction. At High settings, the drop is from 67.2 FPS to 37.8 FPS, a 43.8% reduction. These larger percentage drops indicate that the GPU is being overwhelmed by the pixel count at 4K. The 8 GB memory buffer and the 128-bit bus are unable to keep up with the data demands of 4K rendering.

The scaling pattern reveals that the CPU is not the primary bottleneck. If the CPU were the limiting factor, the frame rates would remain more consistent across resolutions. Instead, the consistent and significant drops as resolution increases point directly to the GPU. The data shows that the Ryzen 5 5500 is capable of feeding the GPU enough data at 1080p and 1440p, but the GPU's own limits are hit at 4K. The 1080p to 4K drop at Low settings is from 169.4 FPS to 70.8 FPS, a 58.2% reduction, which is a massive performance loss driven almost entirely by the GPU.

Settings Recommendations

Based on the measured FPS data, the best experience for this hardware depends on the target resolution.

For 1920x1080, the Ultra preset at 74.7 FPS offers a high-quality visual experience while still staying above 70 FPS. However, the High preset at 97.2 FPS provides a better balance, offering a 22.5 FPS improvement over Ultra while still maintaining high visual fidelity. The Medium preset at 111.5 FPS is also an excellent choice for users who prioritize frame rate over visual detail. The Low preset at 169.4 FPS is best for competitive play or for users with high refresh rate monitors, but it sacrifices visual quality.

For 2560x1440, the Medium preset is the sweet spot. At 81.1 FPS, it provides a smooth experience that is well above the 60 FPS standard. The High preset at 67.2 FPS is also viable, but it leaves less headroom for demanding scenes. The Low preset at 117.3 FPS is the best choice for maximum smoothness, while the Ultra preset at 48.6 FPS is not recommended due to the sub-60 FPS average.

For 3840x2160, the Low preset at 70.8 FPS is the only configuration that provides a playable experience. The Medium preset at 46.1 FPS and the High preset at 37.8 FPS are both below acceptable thresholds for smooth gameplay. The Ultra preset at 27.6 FPS is effectively unplayable. Users targeting 4K should stick to the Low preset to maintain a consistent frame rate.

In summary, the data recommends the Medium preset for 1440p and the High preset for 1080p as the best balance of visual quality and performance. For 4K, the Low preset is the only viable option. The combo's rank of 873 out of 1717 highlights that while it is not a top-tier performer, it is a capable mid-range setup for 1080p and 1440p gaming in Rust.

Hardware Specifications

AMD Ryzen 5 5500

Cores / Threads 6 / 12
Base Clock 3600 MHz
Boost Clock 4200 MHz
TDP 65W
Socket AMD Socket AM4
View Full CPU Details →

AMD Radeon RX 9060 XT 8 GB

VRAM 8 GB GDDR6
Base Clock —
Boost Clock 3130 MHz MHz
TDP 150 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 5500 + AMD Radeon RX 9060 XT 8 GB in Rust

Resolution Settings Avg FPS
3840x2160 Low 70.8
3840x2160 Medium 46.1
3840x2160 High 37.8
3840x2160 Ultra 27.6
2560x1440 Low 117.3
2560x1440 Medium 81.1
2560x1440 High 67.2
2560x1440 Ultra 48.6
1920x1080 Low 169.4
1920x1080 Medium 111.5
1920x1080 High 97.2
1920x1080 Ultra 74.7

Rust with Ryzen 5 5500 + Other GPUs

See how Rust performs with the same CPU but different graphics cards.

Rust with RX 9060 XT 8 GB + Other CPUs

See how Rust performs with the same GPU but different processors.

Other Games with Ryzen 5 5500 + RX 9060 XT 8 GB

Explore FPS benchmarks for other games using this same hardware combination.