Roblox
This combination delivers exceptional performance with an average of 288 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 124 | 152 | 174 | 192 |
| 1440p QHD | 217 | 269 | 307 | 336 |
| 1080p Full HD | 327 | 404 | 455 | 504 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Roblox with AMD Ryzen 5 4600G + NVIDIA GeForce RTX 3080 Ti, In-Depth Analysis
The AMD Ryzen 5 4600G paired with the NVIDIA GeForce RTX 3080 Ti delivers exceptionally high frame rates in Roblox, with the data indicating that the GPU is rarely the limiting factor at lower resolutions. At 1080p, the combination produces average FPS figures that are so high that they clearly exceed the refresh rate of virtually any mainstream display, making the CPU the primary determinant of performance. As resolution increases to 1440p and 4K, the frame rates remain remarkably high, though the scaling pattern reveals a nuanced shift in the system's bottleneck, with the GPU beginning to exert more influence at the highest settings and pixel counts.
Resolution Scaling
The measured FPS data shows a clear and predictable inverse relationship between resolution and average frame rate, but the magnitude of the drop is particularly telling for this specific hardware pairing. Moving from 1920x1080 to 2560x1440 on High settings, the average FPS falls from 403.5 to 269.3, a decrease of approximately 33%. This substantial drop indicates that while the RTX 3080 Ti is immensely powerful, the increased pixel count at 1440p still demands significantly more GPU work, even in a game as lightweight as Roblox.
The transition from 1440p to 3840x2160 at High settings shows a further, more severe decline, with the average FPS dropping from 269.3 to 151.5, a reduction of roughly 44%. This steeper decline at 4K resolution strongly suggests that the GPU is becoming the limiting component at this higher resolution. The RTX 3080 Ti, with its 12 GB of GDDR6X memory and 384-bit memory bus, is still capable of producing over 150 FPS, but the data shows the workload is scaling more aggressively with pixel count.
The scaling pattern across all settings tells a consistent story. At 1080p, the difference between Low (503.8 FPS) and Ultra (327.2 FPS) is a 35% reduction, indicating that the CPU is likely the bottleneck, as the GPU has ample headroom to render frames quickly. At 4K, the spread narrows significantly: Low yields 191.9 FPS, Medium 173.6 FPS, High 151.5 FPS, and Ultra 123.8 FPS. This narrower spread at 4K, where the total reduction from Low to Ultra is 35%, suggests the GPU is now the primary constraint, with its performance ceiling being approached as resolution and settings increase. The data indicates a system where the CPU holds performance back at 1080p, while the GPU takes over as the limiting factor at 4K.
How This Combo Ranks
In the database of tested combinations, this pairing of the Ryzen 5 4600G and RTX 3080 Ti ranks 464th out of 1800 combos for Roblox. This places it in the 74th percentile of all tested configurations, meaning it outperforms roughly three-quarters of the systems in the database for this specific game. The ranking is respectable, though it reflects the fact that the CPU is not a top-tier part, even if the GPU is.
The CPU's individual benchmark scores provide context for this ranking. The Ryzen 5 4600G has an average benchmark score of 17489, which places it in the 75th percentile of all CPUs. Its nearest rivals include the AMD Ryzen 3 PRO 5355GE with a nearly identical score of 17482 (0% delta), and the Intel Core i3-14100T with a score of 17636, which is 0.8% higher. This shows the CPU is competitive with other mid-range parts, but it is far from the fastest available. The GPU, however, is a different story.
The RTX 3080 Ti posts an average benchmark score of 41224, putting it in the 83rd percentile of all GPUs. Its nearest rival, the RTX 3090, scores 41441, which is only 0.5% higher, indicating that the 3080 Ti is performing essentially at the level of the flagship 3090 in general benchmarks. The combination of a strong GPU with a mid-range CPU results in a system that is capable of high frame rates, but the combo rank of 464 suggests that other pairings with more powerful processors achieve even better results in Roblox, a game that can be sensitive to CPU performance at very high frame rates.
GPU Role
The NVIDIA GeForce RTX 3080 Ti is a high-end Ampere architecture GPU with a boost clock of 1665 MHz and a base clock of 1365 MHz. It features 12 GB of GDDR6X memory on a 384-bit bus, providing a memory bandwidth of 912.4 GB/s. This substantial memory subsystem is more than adequate for Roblox's graphical demands, as evidenced by the high frame rates even at 4K Ultra settings. The GPU's 10240 shading units and 320 texture mapping units contribute to its raw processing power.
In this game, the GPU's role becomes more pronounced as resolution increases. At 1080p, the data shows that the GPU is not the bottleneck; the average FPS on Low settings (503.8) is more than double the rate at 4K Ultra (123.8). The GPU's performance is so high that it can easily render frames faster than the CPU can feed it. This is a classic CPU-bound scenario, where the Ryzen 5 4600G's six cores and 12 threads are the limiting factor.
At 4K, the GPU's capabilities are more fully utilized. The 12 GB of VRAM and 912.4 GB/s bandwidth are sufficient to handle the increased texture and geometry data at higher resolutions, but the GPU's compute throughput becomes the limiting factor. The reduction in average FPS from 191.9 at Low to 123.8 at Ultra at 4K demonstrates that the GPU's core processing is being taxed more heavily. The GPU is the star of the show, but the data indicates it is being held back by the CPU in lighter loads, particularly at 1080p.
Measured FPS Breakdown
At 1920x1080, the combination produces outstanding results across all settings. On Low, the average FPS is 503.8, which is an extraordinarily high number that suggests the game is almost entirely CPU-limited. Medium settings yield 455 FPS, while High settings produce 403.5 FPS. Ultra settings reduce the average to 327.2 FPS, which is still a very high and playable frame rate. The scaling from Low to Ultra at 1080p shows a 35% performance drop, a relatively modest penalty given the significant increase in visual quality.
Moving to 2560x1440, the performance remains excellent. Low settings provide an average of 335.8 FPS, which is still high enough for any high-refresh-rate monitor. Medium settings average 306.6 FPS, and High settings average 269.3 FPS. Ultra settings at 1440p yield 216.7 FPS, which is a substantial number for a game at this resolution. The data shows a consistent decrease as settings increase, with a 35% drop from Low to Ultra, similar to the 1080p scaling.
At 3840x2160, the performance is still remarkably high, but the GPU is clearly more involved. Low settings produce an average of 191.9 FPS, which is a high frame rate for 4K. Medium settings average 173.6 FPS, and High settings average 151.5 FPS. Ultra settings at 4K yield 123.8 FPS, which is still a playable frame rate for many users. The scaling from Low to Ultra at 4K shows a 35% drop, but the absolute numbers are lower than at other resolutions, indicating that the GPU's performance ceiling is being approached.
FAQ
Q: What is the highest average FPS recorded for this combo?
A: The highest average FPS recorded is 503.8, achieved at 1920x1080 resolution with Low settings.
Q: How much does the average FPS drop when moving from 1080p to 4K on High settings?
A: On High settings, the average FPS drops from 403.5 at 1920x1080 to 151.5 at 3840x2160, a reduction of 252 FPS or approximately 62.4%.
Q: Is the CPU or GPU the limiting factor at 1080p?
A: At 1080p, the data shows very high frame rates across all settings, with Low settings producing 503.8 FPS and Ultra producing 327.2 FPS. This pattern suggests the CPU is the primary limiting factor, as the GPU has enough headroom to render frames much faster than the CPU can process them.
Q: What is the combo's rank among all tested configurations for this game?
A: This combination of AMD Ryzen 5 4600G and NVIDIA GeForce RTX 3080 Ti ranks 464th out of 1800 tested combos for Roblox.
Q: How does the RTX 3080 Ti's benchmark score compare to its nearest rival?
A: The RTX 3080 Ti has an average benchmark score of 41224, while its nearest rival, the NVIDIA GeForce RTX 3090, has a score of 41441. This represents a 0.5% difference in favor of the RTX 3090.
Q: What is the average FPS at 4K Ultra settings?
A: At 3840x2160 with Ultra settings, the average FPS is 123.8.
Hardware Specifications
AMD Ryzen 5 4600G
NVIDIA GeForce RTX 3080 Ti
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 4600G + NVIDIA GeForce RTX 3080 Ti in Roblox
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 191.9 |
| 3840x2160 | Medium | 173.6 |
| 3840x2160 | High | 151.5 |
| 3840x2160 | Ultra | 123.8 |
| 2560x1440 | Low | 335.8 |
| 2560x1440 | Medium | 306.6 |
| 2560x1440 | High | 269.3 |
| 2560x1440 | Ultra | 216.7 |
| 1920x1080 | Low | 503.8 |
| 1920x1080 | Medium | 455.0 |
| 1920x1080 | High | 403.5 |
| 1920x1080 | Ultra | 327.2 |
Roblox with Ryzen 5 4600G + Other GPUs
See how Roblox performs with the same CPU but different graphics cards.
Roblox with RTX 3080 Ti + Other CPUs
See how Roblox performs with the same GPU but different processors.
Other Games with Ryzen 5 4600G + RTX 3080 Ti
Explore FPS benchmarks for other games using this same hardware combination.