Revolution Idle

The Intel Core i7-14700KF paired with the NVIDIA GeForce RTX 2060 presents a classic case of a high-end CPU anchoring a mid-range GPU. In Revolution Idle, this combination produces playable results at 1080p, but the performance curve reveals a system that is firmly GPU-limited as resolution climbs. The data indicates a 20-core processor with a 5.60 GHz boost clock is not the bottleneck here; instead, the 6 GB VRAM and 336.0 GB/s bandwidth of the RTX 2060 define the experience. This analysis breaks down the measured frames per second (FPS) across resolutions and presets, contextualizes the combo's rank, and offers practical settings advice based solely on the observed numbers.

Resolution Scaling

The measured FPS data shows a steep and predictable decline as resolution increases from 1920x1080 to 3840x2160. At 1080p with Low settings, the combo achieves 102 FPS average. Moving to High settings at the same resolution drops that to 74 FPS, while Medium sits at 77 FPS and Ultra falls to 47 FPS. These numbers suggest that at 1080p, the system has enough headroom to push beyond 60 FPS even on High, but Ultra settings cut that margin significantly.

Stepping up to 2560x1440, the averages drop by roughly a third across the board. High settings yield 47 FPS, Low produces 65 FPS, Medium is 49 FPS, and Ultra drops to 30 FPS. This is a substantial hit, indicating that the GPU is starting to struggle with the increased pixel count. The gap between Low and Medium at 1440p is only 16 FPS, which is narrower than the 25 FPS gap seen at 1080p, suggesting the GPU is becoming the limiting factor rather than the CPU or memory bandwidth.

At 3840x2160, the performance collapses. High settings average just 24 FPS, Medium 26 FPS, and Low 34 FPS. Ultra is nearly unplayable at 16 FPS. The scaling from 1440p to 4K is harsh: High drops from 47 to 24 FPS, a 49% reduction. This pattern is a clear indicator that the RTX 2060’s 6 GB frame buffer and 192-bit memory bus are overwhelmed by 4K resolution, even in a game as light as Revolution Idle. The data shows that the limiting component at 4K is the GPU, not the i7-14700KF, which has ample multi-core strength for this title.

How This Combo Ranks

In the broader database of tested combinations, this specific pairing ranks 2935 out of 3712 combos for Revolution Idle. That places it in the bottom 21% of tested systems, which might seem surprising given the CPU’s strength. However, the ranking reflects the GPU’s modest standing. The RTX 2060 sits at the 58th percentile among all GPUs, with an average benchmark score of 15290. Its nearest rivals include the NVIDIA GeForce GTX 580 (avg score 15283, 0% delta), the AMD Radeon 680M (avg score 15270, 0.1% delta), and the NVIDIA GeForce RTX 3050 OEM (avg score 15199, 0.6% delta). The deltaPct values here are tiny, meaning the RTX 2060 is statistically tied with these cards in raw compute, but its 6 GB VRAM may hurt it in specific scenarios.

The CPU, by contrast, is a powerhouse. The i7-14700KF ranks in the 94th percentile of all CPUs, with an average benchmark score of 70163. Its nearest rivals are the AMD Ryzen 7 9700F (avg score 69996, 0.2% delta), AMD Ryzen 9 7940HX (avg score 69875, 0.4% delta), and AMD Ryzen 9 7950X (avg score 69515, 0.9% delta). The i7-14700KF is actually 1% slower than the Intel Core Ultra 7 265K (avg score 70879, deltaPct -1). This disparity between CPU and GPU performance is why the combo rank is low; the system is unbalanced for this game, with the CPU far outclassing the GPU. The rank of 2935 out of 3712 suggests that most other tested combos have more balanced hardware, even if their CPUs are weaker.

GPU Role

The NVIDIA GeForce RTX 2060 is built on the Turing architecture with a TU106 chip, manufactured on a 12 nm process at TSMC. It has 1920 shading units, 120 texture mapping units, and 48 raster output units. The base clock is 1365 MHz, boosting to 1680 MHz, and the memory runs at 1750 MHz (14 Gbps effective). This configuration yields a pixel rate of 80.64 GPixel/s and a texture rate of 201.6 GTexel/s, with FP32 performance at 6.451 TFLOPS. The card draws 160 W and requires a 450 W power supply.

In Revolution Idle, the GPU’s role is primarily to handle the rendering overhead. The 6 GB GDDR6 memory on a 192-bit bus provides 336.0 GB/s of bandwidth. The measured FPS at 1080p Medium (77 FPS) versus 1440p Medium (49 FPS) shows a 36% drop, which correlates with the increased memory pressure. At 4K, the 34 FPS average on Low settings is barely above unplayable, and it demonstrates that the 6 GB frame buffer is insufficient for that resolution, causing the GPU to thrash. The data shows that the RTX 2060’s compute capabilities are adequate for 1080p, but the memory subsystem becomes the bottleneck at higher resolutions. The card’s 58th percentile ranking among all GPUs confirms it is a mid-tier performer, and the measured FPS in this game aligns with that positioning.

FAQ

Q: Is the Intel Core i7-14700KF overkill for the RTX 2060 in this game?

A: Yes, the data supports this. The CPU ranks in the 94th percentile of all CPUs, with an average benchmark score of 70163, while the GPU ranks in the 58th percentile with an average score of 15290. The combo ranks 2935 out of 3712, indicating the CPU’s power is underutilized because the GPU limits frame rates, particularly above 1080p.

Q: What is the best resolution for this combo to maintain 60+ FPS?

A: Only 1920x1080 achieves 60+ FPS on a consistent basis. At 1080p Low, the average is 102 FPS, and at 1080p High it is 74 FPS. At 1440p, even Low settings only reach 65 FPS, which is still above 60, but High drops to 47 FPS. No 4K preset reaches 60 FPS; the highest is Low at 34 FPS.

Q: How does the RTX 2060 compare to its nearest GPU rivals?

A: The RTX 2060 has an average benchmark score of 15290. It is essentially tied with the NVIDIA GeForce GTX 580 (15283, 0% delta) and the AMD Radeon 680M (15270, 0.1% delta). It is 0.6% faster than the NVIDIA GeForce RTX 3050 OEM (15199) and 0.8% faster than the AMD Radeon RX 7600 (15171). These differences are negligible in real-world terms.

*Q: Does the i7-14700KF’s 20 cores help in Revolution Idle?*

A: The CPU’s multi-core performance is exceptional, with a Cinebench R23 multi-core score of 44167 and a Passmark multithread score of 52425. However, Revolution Idle is an idle game, and the measured FPS data shows no evidence of CPU bottlenecking. The performance drops align with GPU load, so the 20 cores and 28 threads are likely not the limiting factor.

Q: What is the minimum FPS recorded for this combo?

A: The only preset with a reported minimum FPS is Medium at all three resolutions. At 1080p Medium, the minimum is 66 FPS; at 1440p Medium, it is 42 FPS; and at 4K Medium, it is 22 FPS. Other presets do not have min FPS values listed in the data.

Q: Can this combo handle Ultra settings at 1080p?

A: Yes, but with a caveat. The average FPS at 1080p Ultra is 47 FPS, which is below the 60 FPS threshold. It is playable, but not smooth for fast-paced action. For a more consistent experience, High settings at 74 FPS are recommended.

CPU Role

The Intel Core i7-14700KF is a 20-core, 28-thread processor from the Raptor Lake Refresh generation. It has a base clock of 3.40 GHz and a boost clock of 5.60 GHz, with a 125 W TDP. The cache hierarchy includes 80 KB of L1 per core, 2 MB of L2 per core, and 33 MB of shared L3. It supports DDR4 and DDR5 memory in dual-channel mode, and it has PCIe Gen 5 with 16 lanes. The CPU’s benchmark scores are formidable: a Cinebench R23 multi-core score of 44167 and a single-core score of 6235, plus a Geekbench multi-core score of 21462.

In Revolution Idle, the CPU’s role is to manage game logic, simulation, and any background tasks. The data shows that the CPU is not the bottleneck, as frame rates scale with resolution and settings in a way that points to GPU limits. For instance, at 1080p Low, the system hits 102 FPS, but at 4K Low it drops to 34 FPS—a change that has nothing to do with CPU speed. The i7-14700KF’s high single-thread performance (Passmark single-thread score of 4480) ensures that even if the game uses a single core, it has ample headroom. The CPU’s 94th percentile ranking means it outperforms most processors, but this advantage is squandered when paired with a GPU that sits at the 58th percentile. The combo rank of 2935 out of 3712 reflects this imbalance; the CPU is doing its job, but the GPU cannot keep up at higher resolutions.

Settings Recommendations

Based on the measured FPS rows, the best experience for this combo is at 1920x1080 with High settings. This yields an average of 74 FPS, which is comfortably above the 60 FPS target and only 3 FPS lower than Medium (77 FPS). The difference between High and Ultra at 1080p is stark: 74 FPS versus 47 FPS, a 36% drop for visual gains that are unlikely to be noticeable in an idle game. Therefore, High settings at 1080p provide the best balance of smoothness and visual quality.

At 2560x1440, the data suggests using Low settings to maintain a playable frame rate. Low averages 65 FPS, while High drops to 47 FPS and Medium to 49 FPS. The jump from Low to Medium is only 16 FPS, but staying on Low ensures a consistent 60+ FPS experience. Ultra at 1440p is not recommended, as it averages just 30 FPS. For 3840x2160, the data shows that no preset is truly playable. The highest average is Low at 34 FPS, which is below the 60 FPS threshold. If 4K is necessary, Low is the only option, but users should expect a sub-optimal experience. The measured data indicates that the RTX 2060’s 6 GB VRAM is the primary constraint at 4K, so lowering resolution is the only effective remedy. Overall, the sweet spot for this combo is 1080p High, with 1440p Low as a fallback for users who prioritize resolution over smoothness.