Revolution Idle

Revolution Idle

AVERAGE FPS
119
good

This combination provides smooth gameplay with an average of 119 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 40 63 66 88
1440p QHD 77 121 127 168
1080p Full HD 123 178 181 201

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 88
3840x2160 Medium 66
3840x2160 High 63
3840x2160 Ultra 40
2560x1440 Low 168
2560x1440 Medium 127
2560x1440 High 121
2560x1440 Ultra 77
1920x1080 Low 201
1920x1080 Medium 181
1920x1080 High 178
1920x1080 Ultra 123

Revolution Idle with AMD Ryzen 5 7400F + NVIDIA GeForce RTX 5090, In-Depth Analysis

Revolution Idle is an idle game, and its benchmark behavior reflects that genre’s characteristics more than a traditional 3D shooter. The test system pairs the AMD Ryzen 5 7400F, a 6-core/12-thread Zen 4 desktop processor, with the NVIDIA GeForce RTX 5090, the flagship Blackwell GPU. The CPU’s base clock is 3.70 GHz with a 4.70 GHz boost, and it relies on a 32 MB shared L3 cache. The GPU, by contrast, is a massive chip with 21,760 shading units and a 512-bit memory bus delivering 1.79 TB/s of bandwidth. In this specific title, the data shows that the GPU is rarely the bottleneck, even at 4K, which is unusual for such a high-end graphics card. The Ryzen 5 7400F’s single-thread performance, evidenced by a Cinebench R23 single-core score of 3072, likely carries the load, as idle games often have a simulation tick that runs on one or two threads. The measured FPS numbers across resolutions and settings tell a clear story: this is a CPU-limited scenario where the RTX 5090’s immense compute resources are left largely underutilized.

CPU Role — cores, clocks, and how they relate to this game's results

The AMD Ryzen 5 7400F is a 6-core, 12-thread processor built on the Zen 4 architecture, codenamed Raphael. It operates on the AM5 socket and has a base clock of 3.70 GHz, boosting up to 4.70 GHz. In the context of Revolution Idle, these specifications are more relevant than the GPU's raw power. The game's logic, which involves incrementing numbers and calculating progress, is typically bound to a single thread or a small number of threads. The CPU's strong single-core performance, reflected in its Cinebench R23 single-core score of 3072, is the primary driver of the frame rate in this title.

Benchmark results confirm this interpretation. At 1080p with Low settings, the system achieves 201 FPS, but at 1080p with Ultra settings, it drops to 123 FPS. If the game were purely CPU-bound, the settings would have minimal impact, as visual fidelity does not affect the simulation tick rate. The 78 FPS drop from Low to Ultra at 1080p suggests that while the CPU is the primary limiter, the GPU still has some involvement in rendering the game's interface and any visual effects. However, the gap between Low and High at 1080p is only 23 FPS (201 to 178), indicating that the CPU's capacity is being approached. The processor's 6 cores and 12 threads are more than sufficient for an idle game, but its boost clock of 4.70 GHz is the key asset.

The CPU's position in the broader market is solid, with a percentile rank of 83 against all CPUs. Its average benchmark score is 32750, placing it very close to rivals like the Intel Core i5-14600T (32707, 0.1% delta) and the AMD Ryzen 7 PRO 6850H (32812, -0.2% delta). This proximity in synthetic benchmarks suggests that the 7400F is a well-balanced mid-range part. In Revolution Idle, the data shows that the CPU's single-thread performance is what matters most. The game does not scale well with the 12 threads, as evidenced by the fact that the frame rate at 4K Ultra (40 FPS) is significantly lower than at 1080p Ultra (123 FPS), which points to a rendering bottleneck at high resolutions, but the CPU still sets the ceiling for the maximum achievable frame rate. The processor's 65W TDP and 5nm process node are irrelevant to game performance here, but its 32 MB L3 cache helps with the game's data access patterns.

FAQ

Q: Is the AMD Ryzen 5 7400F a bottleneck for the RTX 5090 in this game?

A: Yes, the data strongly indicates a CPU bottleneck. At 1080p Low, the system produces 201 FPS, while at 4K Low, it produces 88 FPS. The frame rate drop when moving to 4K is significant, but the fact that even at 4K Low the system does not exceed 90 FPS suggests the CPU is limiting the maximum output, as the RTX 5090 is capable of far higher frame rates in less demanding titles.

Q: How does the Ryzen 5 7400F compare to its nearest rivals in synthetic benchmarks?

A: The Ryzen 5 7400F has an average benchmark score of 32750. Its nearest rival, the Intel Core i5-14600T, scores 32707, which is a 0.1% difference. The AMD Ryzen AI 7 PRO 360 scores 32662, a 0.3% difference. This indicates that the 7400F is essentially performance-equivalent to these other processors in general compute tasks.

Q: What is the best settings preset for a 60 FPS experience at 4K?

A: According to the measured FPS data, the High preset at 3840x2160 yields an average of 63 FPS. The Medium preset at the same resolution provides 66 FPS. Both are above the 60 FPS threshold. The Ultra preset drops to 40 FPS, which is not smooth. Therefore, either High or Medium is suitable for 4K 60 FPS.

Q: Does the RTX 5090's performance in this game match its high-end specifications?

A: No, the RTX 5090's performance is heavily constrained by the CPU. The GPU's benchmark scores (e.g., Passmark G3D score of 39650) are exceptional, but in Revolution Idle, the frame rates are moderate. At 4K Ultra, the system only achieves 40 FPS, which is far below what the GPU could deliver if it were the limiting factor. This is a case where the game's workload does not utilize the GPU's parallel processing power effectively.

Q: How does the combo rank against other tested system configurations?

A: The combination of the Ryzen 5 7400F and RTX 5090 ranks 88th out of 2986 tested combos in this game. This places it in the top 3% of all systems tested, which is a strong result, but it is not the top configuration. The ranking suggests that other CPU+GPU pairings can achieve higher frame rates, likely due to having a stronger CPU for this specific workload.

Q: Is the Ryzen 5 7400F's single-core or multi-core performance more important here?

A: Single-core performance is more important. The CPU's Cinebench R23 single-core score is 3072, while its multi-core score is 21765. The gap between 1080p Low (201 FPS) and 1080p High (178 FPS) is relatively small, indicating that the game is not using all 12 threads effectively. If multi-core performance were key, the frame rates would be more consistent across different settings at the same resolution, as the CPU's thread utilization would be the limiting factor.

Resolution Scaling

The measured FPS data reveals how the system scales from 1080p to 4K, and this scaling is a classic sign of a CPU bottleneck. At 1080p with Low settings, the system produces 201 FPS. When the resolution is increased to 2560x1440, the frame rate drops to 168 FPS, a 16.4% decrease. Moving to 3840x2160, the frame rate falls to 88 FPS, which is a 56.2% decrease from the 1080p result. This pattern shows that the GPU is handling an increasing pixel load, but the CPU is still the primary constraint.

For the High settings preset, the scaling is similar. At 1080p, the average is 178 FPS. At 1440p, it drops to 121 FPS (a 32% decrease), and at 4K, it drops to 63 FPS (a 64.6% decrease from 1080p). The percentage drop from 1440p to 4K is larger than from 1080p to 1440p, which suggests that the GPU is becoming more involved at higher resolutions, but the overall trend still points to a CPU-limited scenario. If the GPU were the bottleneck, the frame rate would remain relatively flat until the resolution exceeded the GPU's fill rate capabilities.

The Ultra preset tells a different story. At 1080p, the system achieves 123 FPS. At 1440p, it drops to 77 FPS, and at 4K, it falls to 40 FPS. The drop from 1440p to 4K is a 48.1% reduction, which is more consistent with a GPU-bound workload. This indicates that the Ultra settings introduce graphical effects that are heavy on the GPU, such as advanced shading or post-processing, which finally give the RTX 5090 something to do. However, even at 4K Ultra, the frame rate of 40 FPS is not high, suggesting that the CPU is still a limiting factor in maintaining a high frame rate.

The data at Medium settings further clarifies the situation. At 1080p, the average is 181 FPS with a minimum of 154 FPS and a maximum of 209 FPS. At 1440p, the average is 127 FPS (min 108, max 146). At 4K, the average is 66 FPS (min 56, max 76). The variance between minimum and maximum frame rates is consistent across resolutions, which indicates that the game's performance is driven by periodic CPU-intensive calculations, rather than a constant GPU load. The fact that the 4K Medium frame rate (66 FPS) is higher than the 4K High frame rate (63 FPS) confirms that the GPU's workload is not the main issue, as reducing settings from High to Medium should have a larger impact if the GPU were the bottleneck.

Measured FPS Breakdown

The following is a detailed breakdown of the measured FPS across all resolutions and settings, based on the provided data.

At 1920x1080, the system shows its highest frame rates. With Low settings, the average FPS is 201, which is the absolute maximum in the dataset. Moving to Medium, the average drops to 181 FPS, with a minimum of 154 and a maximum of 209. High settings produce an average of 178 FPS. The Ultra preset brings the average down to 123 FPS. The performance gap between Low and High is 23 FPS, while the gap between High and Ultra is 55 FPS, indicating that the Ultra preset introduces a significant rendering load.

At 2560x1440, the frame rates decrease across all settings. Low settings yield 168 FPS. Medium settings produce an average of 127 FPS, with a minimum of 108 and a maximum of 146. High settings drop to 121 FPS. Ultra settings fall to 77 FPS. The scaling from 1080p to 1440p is not linear, as the High preset drops by 57 FPS, while the Medium preset drops by 54 FPS. This suggests that the CPU is still a major factor, as the relative differences between settings remain similar to those at 1080p.

At 3840x2160, the system is pushed the hardest. Low settings produce 88 FPS. Medium settings yield an average of 66 FPS, with a minimum of 56 and a maximum of 76. High settings produce 63 FPS. Ultra settings drop to 40 FPS. The most notable observation is that the High and Medium settings are nearly identical (63 vs 66 FPS), which is unusual. In a GPU-bound scenario, High settings would be noticeably slower than Medium. The fact that they are close suggests that the CPU is the limiting factor, and the GPU can handle the extra load from High settings without a significant frame rate penalty.

The data also shows that the RTX 5090's performance is not fully utilized. The GPU has a Passmark G3D score of 39650, which is exceptional, but the frame rates in this game are moderate. The 4K Ultra result of 40 FPS is particularly telling, as it indicates that the game's engine cannot scale with the GPU's raw power. The 32 GB of VRAM and 1.79 TB/s of memory bandwidth are irrelevant for this title, as the game's assets are likely small and the rendering load is not the bottleneck.

How This Combo Ranks

The combination of the AMD Ryzen 5 7400F and the NVIDIA GeForce RTX 5090 ranks 88th out of 2986 tested combos in Revolution Idle. This is a high rank, placing the system in the top 3% of all configurations tested. However, it is not the top-performing combo, which indicates that there are other CPU+GPU pairings that can achieve higher frame rates in this specific game.

The rank is a reflection of the CPU's strength in single-threaded tasks. The Ryzen 5 7400F has a percentile rank of 83 against all CPUs, which is good, but not elite. Its nearest rivals in synthetic benchmarks include the Intel Core i5-14600T (0.1% delta) and the AMD Ryzen 7 PRO 6850H (-0.2% delta). These processors are comparable in overall performance, but the 7400F's single-core boost clock of 4.70 GHz likely gives it an edge in Revolution Idle's simulation-heavy workload.

The GPU's rank against all GPUs is 92nd percentile, which is higher than the CPU's rank. This means that the RTX 5090 is a more exceptional part relative to its peers than the 7400F is. However, in this game, the GPU's superiority does not translate into a higher combo rank. The fact that the combo ranks 88th out of 2986 suggests that the CPU is the limiting factor, and a system with a stronger CPU (e.g., a higher-tier Ryzen 9 or a Core i9) might rank higher, even with a less powerful GPU. This is a classic example of a CPU-bound title where the GPU's potential is wasted.

Settings Recommendations

Based on the measured FPS data, the ideal settings preset for this combo depends on the target resolution and frame rate. At 3840x2160, the Medium preset offers the best balance, with an average of 66 FPS and a minimum of 56 FPS. This is a smooth experience for most users. The High preset is nearly identical at 63 FPS, but the Medium preset's slightly higher average and minimum make it the safer choice. The Ultra preset should be avoided, as it drops to 40 FPS, which is not a playable experience for a game that requires constant number ticking.

At 2560x1440, the High preset is the best option, providing an average of 121 FPS. The Medium preset offers 127 FPS, but the High preset's visual quality improvement is worth the small frame rate loss. The Ultra preset provides 77 FPS, which is still playable, but the drop from 121 FPS to 77 FPS is substantial. For a 1440p monitor with a 120Hz refresh rate, the High preset is the recommended choice, as it closely matches the refresh rate.

At 1920x1080, the High preset is the best choice for a high-refresh-rate display, providing 178 FPS. The Medium preset provides 181 FPS, which is essentially the same, but the High preset offers better visual fidelity for a negligible performance cost. The Ultra preset provides 123 FPS, which is still smooth, but the 55 FPS drop from High to Ultra is significant. The Low preset at 201 FPS is unnecessary, as the visual quality is too poor to be worthwhile.

In summary, the recommended presets are Medium at 4K, High at 1440p, and High at 1080p. These settings provide the best balance of visual quality and performance, given the CPU-limited nature of the game. The data shows that the RTX 5090 is capable of running the game at 4K, but the Ryzen 5 7400F's single-thread performance is the determining factor for achieving high frame rates. Users with a 4K display should prioritize the Medium preset to ensure a consistent frame rate above 60 FPS.

Hardware Specifications

AMD Ryzen 5 7400F

Cores / Threads 6 / 12
Base Clock 3700 MHz
Boost Clock 4700 MHz
TDP 65W
Socket AMD Socket AM5
View Full CPU Details →

NVIDIA GeForce RTX 5090

VRAM 32 GB GDDR7
Base Clock —
Boost Clock 2407 MHz MHz
TDP 575 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 7400F + NVIDIA GeForce RTX 5090 in Revolution Idle

Resolution Settings Avg FPS
3840x2160 Low 88.0
3840x2160 Medium 66.0
3840x2160 High 63.0
3840x2160 Ultra 40.0
2560x1440 Low 168.0
2560x1440 Medium 127.0
2560x1440 High 121.0
2560x1440 Ultra 77.0
1920x1080 Low 201.0
1920x1080 Medium 181.0
1920x1080 High 178.0
1920x1080 Ultra 123.0

Revolution Idle with Ryzen 5 7400F + Other GPUs

See how Revolution Idle performs with the same CPU but different graphics cards.

Revolution Idle with RTX 5090 + Other CPUs

See how Revolution Idle performs with the same GPU but different processors.

Other Games with Ryzen 5 7400F + RTX 5090

Explore FPS benchmarks for other games using this same hardware combination.