Revolution Idle

Revolution Idle

AVERAGE FPS
98
good

This combination provides smooth gameplay with an average of 98 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 42 65 68 88
1440p QHD 75 107 110 118
1080p Full HD 108 125 124 143

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 88
3840x2160 Medium 68
3840x2160 High 65
3840x2160 Ultra 42
2560x1440 Low 118
2560x1440 Medium 110
2560x1440 High 107
2560x1440 Ultra 75
1920x1080 Low 143
1920x1080 High 125
1920x1080 Medium 124
1920x1080 Ultra 108

Revolution Idle with AMD Ryzen 5 3600 + NVIDIA GeForce RTX 4090, In-Depth Analysis

The pairing of AMD’s Ryzen 5 3600 with NVIDIA’s GeForce RTX 4090 creates a stark contrast in generational capability, and the measured results for Revolution Idle highlight a system that is overwhelmingly limited by its processor. The data shows a 6-core, 12-thread CPU from the Zen 2 era working alongside a flagship Ada Lovelace GPU with 24 GB of VRAM, and the frame rates across resolutions tell a story of a bottleneck that shifts as the pixel load increases.

Resolution Scaling

The frame rate progression from 1080p to 4K reveals how the workload transitions from a CPU-bound state to a more balanced, GPU-reliant state. At 1920x1080 with High settings, the combo produces 125 FPS, which drops to 107.3 FPS at 2560x1440, and finally to 64.7 FPS at 3840x2160. This represents a 48.2% reduction in performance from 1080p to 4K. The scaling is not linear; the drop from 1440p to 4K is a steep 39.7% decline, while the drop from 1080p to 1440p is a milder 14.2% loss.

The relatively small penalty for moving from 1080p to 1440p suggests that at lower resolutions, the Ryzen 5 3600 is the limiting factor. The CPU’s single-thread performance, evidenced by a 3DMark single-thread score of 696 and a Cinebench R23 single-core score of 2124, seems to cap the frame rate. However, the severe drop at 4K indicates that the RTX 4090’s raw compute power—82.58 TFLOPS FP32—is being fully engaged, and the GPU becomes the primary constraint. The 4K Ultra setting, which yields just 41.7 FPS, demonstrates the extreme load placed on the graphics card, while the 4K Low setting at 87.5 FPS shows that even with reduced graphical demands, the CPU still cannot push the GPU to its full potential, as the 1080p Low result of 143.2 FPS is only 63.9% higher.

This pattern implies that the system is well-balanced for 1440p High, where the CPU and GPU can work in closer harmony, but at 4K, the GPU’s immense capability is hamstrung by the processor’s ability to feed it data.

FAQ

Q: How much faster is the RTX 4090 at 1080p Low compared to 4K Ultra?

A: The measured average frame rate at 1080p Low is 143.2 FPS, which is 3.4 times higher than the 41.7 FPS achieved at 4K Ultra, highlighting the extreme performance cost of the highest settings at the highest resolution.

Q: What is the performance difference between High and Ultra settings at 1440p?

A: At 2560x1440, the High preset delivers 107.3 FPS, while the Ultra preset drops to 74.6 FPS. This represents a 30.5% reduction in frame rate, showing that Ultra settings impose a significant penalty over High.

Q: Does the RTX 4090’s 24 GB of VRAM become a limiting factor in this game?

A: The data does not indicate any VRAM-related performance cliffs. The GPU’s 24 GB capacity with 1.01 TB/s bandwidth is far beyond what Revolution Idle appears to require, as the frame rates scale predictably with resolution and settings, not with memory capacity.

Q: How does this combo rank among all tested configurations for Revolution Idle?

A: The combination of the Ryzen 5 3600 and RTX 4090 ranks 271st out of 1774 tested combos, placing it in the top 15.3% of all systems tested for this game.

Q: Is the Ryzen 5 3600 a bottleneck for the RTX 4090?

A: The evidence suggests yes, particularly at lower resolutions. At 1080p, the frame rates across settings are relatively close (107.7 to 143.2 FPS), indicating a CPU ceiling. The CPU’s 3DMark 16-thread score of 4605 and max-thread score of 4603 are nearly identical, showing it has limited multi-thread headroom to exploit the GPU’s power.

Q: What is the best preset for 4K gaming with this hardware?

A: Based on the measured data, the Low preset at 3840x2160 provides 87.5 FPS, which is a playable experience. The Medium preset drops to 67.8 FPS, and High to 64.7 FPS, while Ultra falls to an unplayable 41.7 FPS. Therefore, Low is the only preset that offers a smooth frame rate at 4K.

How This Combo Ranks

With a rank of 271 out of 1774 tested combos, this pairing is in the upper echelon of systems tested for Revolution Idle, but it is not near the top. The percentile placement suggests that while the RTX 4090 provides substantial graphics power, the Ryzen 5 3600 holds the system back from achieving the highest possible frame rates. The CPU’s benchmark scores, such as a PassMark multithread score of 17700 and an average benchmark score of 18129, place it in the 76th percentile of all CPUs. However, its nearest rivals, including the Intel Core i5-11400 with an average score of 18150 and a deltaPct of -0.1%, are extremely close, indicating that the CPU is not a unique outlier but rather a mid-range performer.

The GPU, by contrast, is a top-tier component. Its PassMark G3D score of 38194 and average benchmark score of 66473 put it in the 91st percentile of all GPUs. The discrepancy between the GPU’s high percentile and the combo’s mid-tier rank reveals that the CPU is the limiting factor. If the system had a more powerful processor, the rank would likely be significantly higher. The fact that the combo achieves over 100 FPS at 1440p High shows that the RTX 4090 is capable, but the CPU prevents it from reaching the 144+ FPS territory often associated with this class of GPU.

Measured FPS Breakdown

At 1920x1080, the frame rates are consistently high, but the differences between settings are modest. The Low preset yields 143.2 FPS, which is the highest measured result. High produces 125 FPS, Medium 123.5 FPS, and Ultra 107.7 FPS. The spread from Low to Ultra is 35.5 FPS, or 24.8% of the Low score, indicating a CPU bottleneck that limits the impact of graphical settings.

Moving to 2560x1440, the frame rates remain strong. Low leads with 118 FPS, followed by High at 107.3 FPS and Medium at 109.6 FPS. Ultra drops to 74.6 FPS. The gap between Low and Ultra widens to 43.4 FPS, or 36.8%, suggesting that the GPU is starting to handle more of the workload. The Medium and High settings are nearly identical, with a difference of only 2.3 FPS, which is within the margin of measurement error.

At 3840x2160, the GPU becomes the dominant factor. Low produces 87.5 FPS, Medium 67.8 FPS, High 64.7 FPS, and Ultra falls to 41.7 FPS. The drop from Low to Ultra is 45.8 FPS, or 52.3%, showing that the RTX 4090 is now the primary bottleneck. The 4K results are significantly lower than the 1440p results, with Low at 4K being 25.8% slower than Low at 1440p.

Settings Recommendations

For a balanced experience, the High preset at 2560x1440 offers 107.3 FPS, which is smooth for most gaming scenarios. This resolution and setting combination provides a good balance between visual quality and performance, as the CPU and GPU are both adequately utilized. The Medium preset at 1440p provides a nearly identical frame rate of 109.6 FPS, but with lower visual fidelity, so High is the better choice.

At 1080p, the High preset at 125 FPS is recommended, as the gains from dropping to Low (143.2 FPS) are marginal in real-world terms, and the visual improvement from High is worth the 12.7% performance cost. The Ultra preset at 1080p, yielding 107.7 FPS, is not worth the performance hit over High.

For 4K, the Low preset at 87.5 FPS is the only viable option for smooth gameplay. The Medium and High presets drop to the 64-68 FPS range, which may be acceptable for some, but the data shows that Low is the most reliable for maintaining a high frame rate. The Ultra preset at 41.7 FPS should be avoided unless the user prioritizes visuals over playability.

CPU Role

The AMD Ryzen 5 3600, with its 6 cores and 12 threads, is a Zen 2 architecture processor running at a base clock of 3.60 GHz and a boost clock of 4.20 GHz. Its benchmark results show a clear profile: a 3DMark single-thread score of 696 and a Cinebench R23 single-core score of 2124 indicate moderate single-thread performance, while the Cinebench R23 multicore score of 15045 and PassMark multithread score of 17700 show decent multi-threaded capability. However, the 3DMark 16-thread score of 4605 and max-thread score of 4603 are nearly identical, suggesting that the CPU does not scale well beyond 16 threads, which is expected for a 12-thread part.

In Revolution Idle, an idle game, the CPU’s single-thread performance is likely the most critical factor. The game’s logic, which may involve complex calculations for progress and upgrades, appears to be limited by the processor’s ability to execute instructions quickly. The data supports this: at 1080p, where the GPU is less stressed, the frame rates plateau at around 143 FPS even on Low settings, suggesting the CPU is the ceiling. The CPU’s 76th percentile ranking among all CPUs, with an average benchmark score of 18129, places it as a competent but not exceptional processor, and its nearest rivals (Intel Core i5-11400, AMD Ryzen 5 7535HS) are all within a 0.3% performance delta, showing it is a middle-of-the-pack contender.

GPU Role

The NVIDIA GeForce RTX 4090 is a behemoth of a graphics card, featuring the AD102 chip with 16,384 shading units, 512 TMUs, and 176 ROPs. Its 24 GB of GDDR6X memory on a 384-bit bus provides a massive 1.01 TB/s of bandwidth. The GPU’s compute capabilities are staggering, with 82.58 TFLOPS of FP32 performance and a pixel rate of 443.5 GPixel/s. The memory clocks are listed at 1313 MHz, with a 21 Gbps effective data rate.

In this game, the RTX 4090’s role is complex. At resolutions below 4K, the GPU is underutilized due to the CPU bottleneck, as evidenced by the small performance differences between settings at 1080p. However, at 4K, the GPU’s power becomes apparent, and the frame rates scale more dramatically with settings, from 87.5 FPS at Low to 41.7 FPS at Ultra. This indicates that the RTX 4090 is capable of handling the graphical load, but its full potential is only realized when the CPU can keep up. The GPU’s 91st percentile ranking, with a PassMark G3D score of 38194, confirms its status as a top-tier component, but the combo’s rank of 271st shows that the CPU is holding it back. The 24 GB of VRAM is more than sufficient for this game, and the data shows no signs of memory-related throttling.

Hardware Specifications

AMD Ryzen 5 3600

Cores / Threads 6 / 12
Base Clock 3600 MHz
Boost Clock 4200 MHz
TDP 65W
Socket AMD Socket AM4
View Full CPU Details →

NVIDIA GeForce RTX 4090

VRAM 24 GB GDDR6X
Base Clock —
Boost Clock 2520 MHz MHz
TDP 450 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 3600 + NVIDIA GeForce RTX 4090 in Revolution Idle

Resolution Settings Avg FPS
3840x2160 Low 87.5
3840x2160 Medium 67.8
3840x2160 High 64.7
3840x2160 Ultra 41.7
2560x1440 Low 118.0
2560x1440 Medium 109.6
2560x1440 High 107.3
2560x1440 Ultra 74.6
1920x1080 Low 143.2
1920x1080 High 125.0
1920x1080 Medium 123.5
1920x1080 Ultra 107.7

Revolution Idle with Ryzen 5 3600 + Other GPUs

See how Revolution Idle performs with the same CPU but different graphics cards.

Revolution Idle with RTX 4090 + Other CPUs

See how Revolution Idle performs with the same GPU but different processors.

Other Games with Ryzen 5 3600 + RTX 4090

Explore FPS benchmarks for other games using this same hardware combination.