Revolution Idle

Revolution Idle

AVERAGE FPS
63
good

This combination provides smooth gameplay with an average of 63 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 20 32 33 44
1440p QHD 39 60 64 84
1080p Full HD 61 96 101 122

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 44
3840x2160 Medium 33
3840x2160 High 32
3840x2160 Ultra 20
2560x1440 Low 84
2560x1440 Medium 64
2560x1440 High 60
2560x1440 Ultra 39
1920x1080 Low 122
1920x1080 Medium 101
1920x1080 High 96
1920x1080 Ultra 61

Revolution Idle with AMD Ryzen 5 2600 + NVIDIA GeForce RTX 4060, In-Depth Analysis

Revolution Idle, despite its deceptively simple genre label, presents a surprisingly demanding workload when pushed to higher resolutions and presets. The measured data for the AMD Ryzen 5 2600 and NVIDIA GeForce RTX 4060 combination reveals a system that scales in a predictable manner, but with some significant drop-offs that highlight where the bottleneck truly lies. This analysis examines the measured FPS across 1080p, 1440p, and 4K to understand the performance envelope of this pairing.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The data indicates a clear and substantial performance cost as resolution increases. At the High preset, the transition from 1920x1080 to 2560x1440 sees the average frame rate drop from 96 FPS to 60 FPS, a reduction of 36 FPS. Moving further up to 3840x2160 at the same High preset yields an average of just 32 FPS, which is exactly half the 1080p score. This scaling pattern is typical of a GPU-bound scenario, where the rendering resolution directly impacts the workload on the graphics processor.

However, the Low preset tells a slightly different story. At 1080p Low, the system achieves 122 FPS. Dropping to 1440p Low reduces this to 84 FPS, and at 4K Low, it falls to 44 FPS. The percentage drop from 1080p to 4K at Low settings is more severe than at High settings, which suggests that at lower graphical fidelity, the CPU begins to play a more significant role in limiting performance, though the GPU is still the primary constraint. The gap between High and Low at 1080p is 26 FPS, but at 4K, that gap narrows to just 12 FPS, reinforcing that the GPU is the dominant limiting factor at higher resolutions.

The most dramatic scaling is observed in the Ultra preset. At 1080p Ultra, the average is 61 FPS, which is respectable. At 1440p Ultra, it plummets to 39 FPS, and at 4K Ultra, it hits a low of 20 FPS. The 4K Ultra result is only 32.8% of the 1080p Ultra score, demonstrating a severe penalty for enabling the highest settings at the highest resolution. This suggests that the Ultra preset introduces effects that are particularly taxing on the RTX 4060's resources, likely related to its 8 GB memory capacity or specific shader complexity, making 4K Ultra an unrealistic target.

The data points to a system that is fundamentally GPU-limited in this game. The RTX 4060, with its 8 GB of VRAM and 128-bit memory bus, shows its limitations as the fill rate and memory bandwidth demands increase with resolution. The Ryzen 5 2600, while an older six-core processor, appears to be sufficient to feed the GPU at 1080p High, as evidenced by the 96 FPS average, but the scaling curve suggests that the GPU's performance ceiling is reached well before the CPU becomes a significant hindrance.

GPU Role — VRAM, clocks, and how they relate to this game's results

The NVIDIA GeForce RTX 4060 is the central figure in these benchmark results, and its specifications directly correlate with the observed performance. The GPU operates at a base clock of 1830 MHz and a boost clock of 2460 MHz, with memory running at 2125 MHz, or 17 Gbps effective. These clocks, combined with 3072 shading units, allow for a theoretical FP32 performance of 15.11 TFLOPS. The 8 GB of GDDR6 memory on a 128-bit bus yields a bandwidth of 272.0 GB/s, which is a critical specification for understanding the 4K performance drop-off.

The 4K results, particularly at Ultra settings, point towards a VRAM or bandwidth limitation. At 20 FPS, the system is not just slow; it is likely stalling due to memory constraints. The 8 GB frame buffer can be exhausted by high-resolution textures and effects, forcing the GPU to use slower system memory over the PCIe 4.0 x8 interface, which is a fraction of the speed of the dedicated VRAM. This would explain the steep decline from 39 FPS at 1440p Ultra to 20 FPS at 4K Ultra, as the memory subsystem becomes the primary bottleneck.

The GPU's performance in synthetic benchmarks, such as a Passmark G3D score of 19545 and a 3DMark Steel Nomad DX12 score of 2302, positions it as a mid-range part. Its percentile rank of 61 against all GPUs suggests it is not a top-tier performer, but it is also far from entry-level. The measured FPS in Revolution Idle reflects this, with the card delivering smooth 60+ FPS experiences at 1080p High and Medium, but struggling to maintain playable frame rates at 4K with higher presets. The data implies that for this game, the RTX 4060 is best suited for 1080p and 1440p gaming, where its balance of compute power and memory bandwidth can be effectively utilized.

Settings Recommendations — which preset gives the best experience per the measured rows

Based on the measured data, the optimal settings for this combo depend heavily on the target resolution. For a 1920x1080 display, the High preset at 96 FPS is the clear winner, providing a silky-smooth experience that is nearly on par with the Low preset's 122 FPS but with significantly better visual quality. The Medium preset offers 101 FPS, but the 5 FPS gain over High is negligible compared to the visual trade-off. Ultra at 61 FPS is playable but introduces a 35 FPS penalty over High, which is substantial for idle game that may not have rapidly moving visuals.

At 2560x1440, the High preset at 60 FPS is the recommended choice for a balanced experience. It provides a solid 60 FPS target, which is the standard for smooth gameplay. The Medium preset at 64 FPS offers a marginal 4 FPS improvement, and the Low preset at 84 FPS sacrifices too much visual fidelity for a 24 FPS gain. Ultra at 39 FPS is below the 60 FPS threshold and should be avoided for a smooth experience. The data suggests that High is the performance sweet spot at this resolution.

For 3840x2160, the situation is more challenging. The Low preset at 44 FPS is the only option that approaches a playable frame rate, and even then, it is below 60 FPS. Medium at 33 FPS and High at 32 FPS are nearly identical, indicating that the GPU is heavily constrained at this resolution, and the preset choice has little impact. Ultra at 20 FPS is unplayable. Therefore, for 4K, the recommendation is to use the Low preset and accept a lower frame rate, or to play at a lower resolution. The data clearly shows that this GPU is not designed for 4K gaming in this title.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

1920x1080:

  • Low: 122 FPS average.
  • Medium: 101 FPS average, with a range from 86 to 116 FPS.
  • High: 96 FPS average.
  • Ultra: 61 FPS average.

2560x1440:

  • Low: 84 FPS average.
  • Medium: 64 FPS average, with a range from 54 to 73 FPS.
  • High: 60 FPS average.
  • Ultra: 39 FPS average.

3840x2160:

  • Low: 44 FPS average.
  • Medium: 33 FPS average, with a range from 28 to 38 FPS.
  • High: 32 FPS average.
  • Ultra: 20 FPS average.

The data confirms a consistent pattern: each step up in resolution yields a roughly 30-40% reduction in average FPS for a given preset. The minimum FPS data for Medium settings shows that frame times are relatively stable, with the 1080p Medium low of 86 FPS being well above the 1440p Medium low of 54 FPS and the 4K Medium low of 28 FPS. This indicates that performance is not just lower at higher resolutions but also less consistent, with more pronounced dips.

How This Combo Ranks — use comboRankInGame vs other tested combos

In the broader context of all tested combinations for Revolution Idle, this pairing of the AMD Ryzen 5 2600 and NVIDIA GeForce RTX 4060 ranks at position 2047 out of 3712 total combos. This places it squarely in the middle of the pack, indicating that while it is not a top-tier configuration, it is also far from being a low performer. The rank of 2047 suggests that there are 2046 other system configurations that achieve higher average performance in this specific game, which is a considerable number given the game's idle nature.

This mid-pack ranking is consistent with the hardware's individual performance characteristics. The RTX 4060, with a percentile rank of 61 among all GPUs, is a solid mid-range option, but it is outclassed by many higher-end cards that would boost the combo's overall standing. Similarly, the Ryzen 5 2600, with a percentile rank of 75 among all CPUs, is a capable processor, but it is not a performance leader. The combination of two mid-range parts results in a system that is adequate for most gaming scenarios but does not excel in this specific benchmark.

The ranking implies that users with this hardware should not expect to see their system near the top of any performance charts. However, for a game like Revolution Idle, which is not typically a high-intensity action title, the mid-pack ranking is more than sufficient for a satisfying experience, especially at 1080p and 1440p, as the measured FPS data shows.

CPU Role — cores, clocks, and how they relate to this game's results

The AMD Ryzen 5 2600 is a 6-core, 12-thread processor based on the Zen+ architecture, manufactured on a 12 nm process by GlobalFoundries. It has a base clock of 3.40 GHz and a boost clock of 3.90 GHz. In synthetic benchmarks, it scores 1248 in Cinebench R15 multicore and 157.3 in single-core, and 5648 in Geekbench multicore and 1154 in single-core. These scores indicate a processor that was solid at its 2018 release but is now several generations old.

In the context of Revolution Idle, the CPU's role appears to be secondary to the GPU. The fact that the FPS scales down significantly with resolution, even at Low settings, suggests that the game is not heavily CPU-bound. If the CPU were the limiting factor, we would expect to see similar FPS across all resolutions at a given preset, as the CPU workload would remain constant. Instead, the FPS drops from 122 at 1080p Low to 44 at 4K Low, indicating that the GPU is the primary bottleneck.

However, the CPU is not entirely irrelevant. The 6-core, 12-thread configuration ensures that the system can handle background tasks and the game's logic without causing stutter. The 16 MB of shared L3 cache and 46.9 GB/s of memory bandwidth are sufficient to feed the GPU data without creating a bottleneck. The CPU's single-thread performance, as measured by its Geekbench single-core score of 1154, is adequate for the game's main loop, but it is not exceptional. The data suggests that the Ryzen 5 2600 provides a stable foundation for the RTX 4060, but it does not contribute to pushing frame rates higher at lower resolutions where the GPU has headroom.

FAQ

Q: What is the best resolution to play Revolution Idle with this hardware?

A: Based on the measured data, 1920x1080 with the High preset provides the best balance, yielding an average of 96 FPS. 2560x1440 High is also viable at 60 FPS, but 3840x2160 fails to reach a smooth 60 FPS on any preset, with the best being Low at 44 FPS.

Q: Can this system handle 4K gaming in Revolution Idle?

A: It can run the game at 4K, but not comfortably. The highest average FPS at 3840x2160 is 44 FPS with the Low preset. Medium and High presets drop to 33 and 32 FPS respectively, and Ultra is only 20 FPS, making 4K gaming a suboptimal experience.

Q: How does the RTX 4060's 8 GB VRAM affect performance?

A: The 8 GB frame buffer is likely the cause of the severe performance drop at 4K Ultra. The data shows a steep decline from 39 FPS at 1440p Ultra to 20 FPS at 4K Ultra, which is indicative of the GPU running out of memory and needing to access slower system memory, thus creating a bottleneck.

Q: Is the Ryzen 5 2600 a bottleneck for the RTX 4060 in this game?

A: The data does not suggest a significant CPU bottleneck. If the CPU were the limit, FPS would remain constant across resolutions. Instead, FPS scales down with resolution (e.g., from 96 FPS at 1080p High to 32 FPS at 4K High), showing the GPU is the primary limiting component in this title.

Q: What is the difference in performance between the High and Ultra presets at 1440p?

A: At 2560x1440, the High preset averages 60 FPS, while the Ultra preset averages 39 FPS. This represents a 21 FPS drop, or a 35% reduction in frame rate, for enabling the highest settings, which is a significant cost for potentially minimal visual gains in an idle game.

Q: How does this combo rank compared to all other tested systems?

A: This configuration of the AMD Ryzen 5 2600 and NVIDIA GeForce RTX 4060 ranks 2047 out of 3712 tested combos for Revolution Idle. This places it in the middle of the performance distribution, meaning it performs better than about 45% of the tested systems but worse than the top 55%.

Hardware Specifications

AMD Ryzen 5 2600

Cores / Threads 6 / 12
Base Clock 3400 MHz
Boost Clock 3900 MHz
TDP 65W
Socket AMD Socket AM4
View Full CPU Details →

NVIDIA GeForce RTX 4060

VRAM 8 GB GDDR6
Base Clock —
Boost Clock 2460 MHz MHz
TDP 115 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 2600 + NVIDIA GeForce RTX 4060 in Revolution Idle

Resolution Settings Avg FPS
3840x2160 Low 44.0
3840x2160 Medium 33.0
3840x2160 High 32.0
3840x2160 Ultra 20.0
2560x1440 Low 84.0
2560x1440 Medium 64.0
2560x1440 High 60.0
2560x1440 Ultra 39.0
1920x1080 Low 122.0
1920x1080 Medium 101.0
1920x1080 High 96.0
1920x1080 Ultra 61.0

Revolution Idle with Ryzen 5 2600 + Other GPUs

See how Revolution Idle performs with the same CPU but different graphics cards.

Revolution Idle with RTX 4060 + Other CPUs

See how Revolution Idle performs with the same GPU but different processors.

Other Games with Ryzen 5 2600 + RTX 4060

Explore FPS benchmarks for other games using this same hardware combination.