Red Dead Redemption 2
This combination offers playable performance with an average of 52 FPS, though you may want to lower settings for smoother gameplay.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 22 | 30 | 36 | 48 |
| 1440p QHD | 33 | 46 | 55 | 73 |
| 1080p Full HD | 44 | 61 | 73 | 98 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Red Dead Redemption 2 with Intel Core Ultra 9 185H + NVIDIA GeForce RTX 4060, In-Depth Analysis
Benchmark results for Red Dead Redemption 2 on the Intel Core Ultra 9 185H and NVIDIA GeForce RTX 4060 show a system that is well-suited to 1080p play, acceptable at 1440p, and only marginally playable at 4K on lower settings. Across all four quality presets, average frame rates drop by roughly half when moving from 1920x1080 to 3840x2160, indicating that the GPU is the primary performance limiter. The combo ranks 2283rd out of 3714 tested configurations in this game, a position that aligns with the GPU's mid-pack standing among all graphics cards.
Resolution Scaling
The measured FPS data for Red Dead Redemption 2 reveals a consistent and steep penalty as resolution increases. At Low settings, the average frame rate falls from 98 FPS at 1920x1080 to 73 FPS at 2560x1440, then to 48 FPS at 3840x2160. The drop from 1080p to 1440p is 25 FPS, and the further drop from 1440p to 4K is another 25 FPS. At Medium settings, the same progression goes from 73 to 55 to 36 FPS, with reductions of 18 and 19 FPS respectively. High settings show a similar pattern: 61 to 46 to 30 FPS, with 15 and 16 FPS gaps. Ultra settings yield 44 to 33 to 22 FPS, with 11 and 11 FPS drops.
The near-linear scaling with pixel count points directly to the graphics card as the limiting component. The CPU's performance is largely constant across these resolutions, so the frame rate collapses are driven by the GPU's workload. At 4K, even the Low preset delivers only 48 FPS, which is below the 60 FPS threshold commonly associated with smooth play. The Ultra preset at 4K drops to 22 FPS, which is borderline unplayable. At 1080p, however, the system can exceed 60 FPS on Low, Medium, and High presets, with 98, 73, and 61 FPS respectively. Only Ultra at 1080p falls short at 44 FPS.
The scaling curve is not uniform across settings. The relative penalty from 1080p to 4K is larger for lower presets: Low drops by 50 FPS (98 to 48), while Ultra drops by only 22 FPS (44 to 22). This suggests that at higher presets, the GPU is already saturated at 1080p, so the additional resolution cost is smaller in absolute terms. At lower presets, the GPU has headroom at 1080p, making the resolution jump more costly. This behavior is typical of a GPU that is limited by pixel throughput and memory bandwidth rather than by compute capacity.
GPU Role
The NVIDIA GeForce RTX 4060 is an Ada Lovelace GPU with 8 GB of GDDR6 memory on a 128-bit bus, delivering 272.0 GB/s of bandwidth. Its base clock is 1830 MHz, with a boost clock of 2460 MHz. The GPU's PassMark G3D score is 19545, placing it at the 61st percentile among all tested GPUs. Its nearest rivals in average benchmark score are the AMD Radeon HD 7790 (17666, 0.2% higher), the AMD Radeon 780M (17588, 0.3% lower), and the AMD Radeon Pro 560 (17551, 0.5% lower). This shows the RTX 4060 sits in the mid-range of GPU performance, which is consistent with its measured frame rates in Red Dead Redemption 2.
The 8 GB VRAM capacity is a notable constraint for 4K gaming. At 4K Ultra, the game demands more memory than the GPU can efficiently supply, resulting in 22 FPS. Even at 4K Medium, the average is 36 FPS, which is not smooth. The 128-bit memory interface and 272 GB/s bandwidth are modest figures, and the scaling data suggests that memory throughput becomes a bottleneck at higher resolutions. The GPU's FP32 performance is 15.11 TFLOPS, which is adequate for 1080p and 1440p but insufficient for 4K on this title.
The GPU's nearest rival in the benchmark database, the AMD Radeon HD 7790, is an older card, yet the RTX 4060 is only 0.2% faster in average benchmark score. This highlights that the RTX 4060 is not a high-end part. In this game, the GPU's performance at 1080p High (61 FPS) and 1440p Medium (55 FPS) shows it can handle mainstream gaming, but it is not designed for 4K. The launch MSRP of the GPU is 299 USD.
Settings Recommendations
Based on the measured FPS data, the optimal preset depends on the target resolution and frame rate. For 1920x1080, the High preset delivers 61 FPS average, which is just above the 60 FPS threshold. The Medium preset offers 73 FPS, providing a comfortable margin for smoother play. Low yields 98 FPS, but with obvious visual compromises. Ultra drops to 44 FPS, which is below the 60 FPS target. For 1080p, the best balance is Medium or High, with Medium being the safer choice for maintaining 60 FPS with headroom.
At 2560x1440, the Low preset achieves 73 FPS, which is actually higher than the 1080p High preset's 61 FPS. Medium at 1440p gives 55 FPS, which is below 60 but still playable. High drops to 46 FPS, and Ultra falls to 33 FPS. For 1440p, the Low preset is the only one that consistently exceeds 60 FPS, while Medium provides a playable 55 FPS with better visuals. High and Ultra are not recommended for a smooth experience.
At 3840x2160, only the Low preset produces a playable average of 48 FPS. Medium yields 36 FPS, High 30 FPS, and Ultra 22 FPS. No preset reaches 60 FPS at 4K. The Low preset is the only viable option for 4K, and even then, it falls short of the 60 FPS ideal. The data indicates that this system is not suited for 4K gaming beyond the lowest quality settings.
The measured FPS rows also include minimum and maximum values for Medium settings. At 1080p Medium, the minimum is 62 FPS and the maximum is 84 FPS. At 1440p Medium, the range is 47 to 63 FPS. At 4K Medium, the range is 31 to 42 FPS. These ranges suggest that the Medium preset has manageable frame time variance, though the average values are the primary consideration.
How This Combo Ranks
The Intel Core Ultra 9 185H and RTX 4060 combination is ranked 2283rd out of 3714 tested systems in Red Dead Redemption 2. This places it in the bottom half of all tested combos, with only about 39% of configurations performing worse. The rank reflects the GPU's moderate standing, as the CPU is far stronger relative to its peers. The GPU's percentile rank is 61, meaning it outperforms 61% of all GPUs, but the CPU's percentile is 85, outperforming 85% of all CPUs. The combination of a high-tier CPU with a mid-tier GPU results in a system that is limited by graphics performance in this game.
The combo's rank is consistent with the FPS data: at 4K Ultra, the system delivers 22 FPS, which is below the 30 FPS threshold often considered minimal for playability. At 1080p High, the system achieves 61 FPS, which is acceptable but not exceptional. The rank does not reflect the CPU's capability, which is evidenced by its high benchmark scores. Instead, it is the GPU that drags the overall ranking down. For a system targeting higher resolutions, the RTX 4060 is the weak link.
CPU Role
The Intel Core Ultra 9 185H is a 16-core, 22-thread processor based on the Meteor Lake architecture, with a base clock of 3.90 GHz and a boost clock of 5.10 GHz. Its L3 cache is 24 MB shared, and it supports DDR5 memory with a dual-channel bus. The CPU's Cinebench R23 multi-core score is 17984.5, and the single-core score is 1810.5. In Geekbench, it scores 11657 multi-core and 1794 single-core. Its PassMark multithread score is 29376, and the single-thread score is 3697. The CPU's percentile versus all CPUs is 85, meaning it ranks above 85% of CPUs.
The nearest rivals in the CPU benchmark database are the AMD Ryzen AI 7 PRO 350 (average score 35719, delta -0.1%), the Intel Core 7 250H (35728, -0.2%), the AMD Ryzen 7 PRO 5845 (35802, -0.4%), and the AMD Ryzen 7 7700X (35909, -0.7%). These deltas are all within 1% of the Core Ultra 9's average benchmark score of 35670. This indicates that the CPU is competitive with other high-end mobile and desktop processors, and its performance is not a limiting factor in this game.
In Red Dead Redemption 2, the CPU's role is secondary to the GPU. The frame rate scaling across resolutions is nearly linear, which would not be the case if the CPU were the bottleneck. If the CPU were the limiting factor, the frame rates would be similar regardless of resolution. Instead, the data shows that higher resolutions reduce FPS, which is a GPU-bound scenario. The CPU's high core count and boost clock ensure that it can feed the GPU with enough data, but the GPU's performance ceiling is what determines the final frame rate.
The CPU's launch MSRP is $640, which reflects its high-end positioning. However, the benchmark results indicate that pairing it with an RTX 4060 creates an imbalance in which the GPU cannot fully utilize the CPU's capability in this title. The CPU's strong single-core performance, as shown by the Cinebench R23 single-core score of 1810.5, is sufficient for the game's simulation and AI tasks, but the GPU's fill rate and memory bandwidth are the main constraints.
Measured FPS Breakdown
The following table summarizes the measured FPS for each resolution and setting combination:
| Resolution | Settings | Average FPS | Min FPS | Max FPS |
|------------|----------|-------------|---------|---------|
| 3840x2160 | High | 30 | - | - |
| 3840x2160 | Low | 48 | - | - |
| 3840x2160 | Medium | 36 | 31 | 42 |
| 3840x2160 | Ultra | 22 | - | - |
| 2560x1440 | High | 46 | - | - |
| 2560x1440 | Low | 73 | - | - |
| 2560x1440 | Medium | 55 | 47 | 63 |
| 2560x1440 | Ultra | 33 | - | - |
| 1920x1080 | High | 61 | - | - |
| 1920x1080 | Low | 98 | - | - |
| 1920x1080 | Medium | 73 | 62 | 84 |
| 1920x1080 | Ultra | 44 | - | - |
The data shows that the 1080p Low preset delivers the highest average FPS at 98, while the 4K Ultra preset delivers the lowest at 22. At 1080p, the Medium preset (73 FPS) is the best balance of visual quality and frame rate, while the High preset (61 FPS) is still above 60. At 1440p, the Low preset (73 FPS) is the only one that exceeds 60, and the Medium preset (55 FPS) is the best compromise. At 4K, the Low preset (48 FPS) is the only playable option, with all other presets falling below 36 FPS.
The minimum and maximum values for the Medium preset provide additional insight. At 1080p Medium, the minimum is 62 FPS, which is above the 60 FPS threshold, indicating consistent performance. At 1440p Medium, the minimum is 47 FPS, which is below 60 but still playable. At 4K Medium, the minimum is 31 FPS, which is on the edge of playability. The maximum values follow the same trend, with 84 FPS at 1080p, 63 FPS at 1440p, and 42 FPS at 4K. This shows that the Medium preset is viable at 1080p and 1440p, but not at 4K.
Overall, the measured FPS data confirms that the Intel Core Ultra 9 185H and RTX 4060 combo is a 1080p-oriented system. It handles 1080p with high frame rates on most presets, can manage 1440p at Low or Medium settings, and only provides a playable experience at 4K when using Low settings. The ranking of 2283 out of 3714 combos is a direct consequence of the GPU's mid-range performance, while the CPU's strong benchmark scores indicate that it is not the limiting factor in this game.
Hardware Specifications
Intel Core Ultra 9 185H
NVIDIA GeForce RTX 4060
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core Ultra 9 185H + NVIDIA GeForce RTX 4060 in Red Dead Redemption 2
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 48.0 |
| 3840x2160 | Medium | 36.0 |
| 3840x2160 | High | 30.0 |
| 3840x2160 | Ultra | 22.0 |
| 2560x1440 | Low | 73.0 |
| 2560x1440 | Medium | 55.0 |
| 2560x1440 | High | 46.0 |
| 2560x1440 | Ultra | 33.0 |
| 1920x1080 | Low | 98.0 |
| 1920x1080 | Medium | 73.0 |
| 1920x1080 | High | 61.0 |
| 1920x1080 | Ultra | 44.0 |
Red Dead Redemption 2 with RTX 4060 + Other CPUs
See how Red Dead Redemption 2 performs with the same GPU but different processors.
Other Games with iUltra 9 185H + RTX 4060
Explore FPS benchmarks for other games using this same hardware combination.