Red Dead Redemption 2

Red Dead Redemption 2

AVERAGE FPS
93
good

This combination provides smooth gameplay with an average of 93 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 41 53 67 87
1440p QHD 59 82 98 135
1080p Full HD 78 109 133 180

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 87
3840x2160 Medium 67
3840x2160 High 53
3840x2160 Ultra 41
2560x1440 Low 135
2560x1440 Medium 98
2560x1440 High 82
2560x1440 Ultra 59
1920x1080 Low 180
1920x1080 Medium 133
1920x1080 High 109
1920x1080 Ultra 78

Red Dead Redemption 2 with Intel Core i5-14400F + NVIDIA GeForce RTX 4070 Ti, In-Depth Analysis

The Intel Core i5-14400F paired with the NVIDIA GeForce RTX 4070 Ti delivers a robust experience in Red Dead Redemption 2, but the data reveals a clear performance hierarchy that depends heavily on your resolution and settings preferences. This combination ranks in the top tier of tested configurations, with the CPU holding its own against more expensive options while the GPU dictates the frame rate at higher resolutions. The measured results show that this is a system capable of high-refresh-rate play at 1440p, but one that requires careful settings management to maintain smooth performance at 4K.

Resolution Scaling

The frame rate drop from 1080p to 4K is substantial and reveals where the bottleneck lies. At High settings, the average FPS falls from 109.1 at 1920x1080 to 81.8 at 2560x1440, a reduction of 27.3 FPS. Moving to 4K at 3840x2160, the average plummets to 52.7 FPS, which is a 56.4 FPS drop from the 1080p figure. This steep decline indicates that the RTX 4070 Ti becomes the limiting factor as pixel count increases, with the Core i5-14400F providing ample headroom at lower resolutions.

The pattern is consistent across all settings presets. At Low settings, the system achieves 179.8 FPS at 1080p, 135.4 FPS at 1440p, and 87.3 FPS at 4K. The relative drop from 1080p to 1440p is 44.4 FPS, while the drop from 1440p to 4K is 48.1 FPS. This shows that the scaling penalty intensifies as resolution increases, typical of a GPU-bound scenario. At Ultra settings, the numbers tell a similar story: 78.4 FPS at 1080p, 58.6 FPS at 1440p, and 40.9 FPS at 4K. The gap between 1080p and 1440p is 19.8 FPS, and the gap between 1440p and 4K is 17.7 FPS, suggesting that even at the highest settings, the GPU is the primary constraint.

The data indicates that at 1080p, the CPU is likely not the limiting factor, as the FPS figures are high enough to suggest the GPU is still doing the heavy lifting. However, the scaling between 1440p and 4K shows a more pronounced drop, reinforcing that the RTX 4070 Ti's 12 GB of GDDR6X memory and 504.2 GB/s bandwidth are being taxed by the higher pixel counts. For users targeting 4K, the frame rates at Medium (66.7 FPS) and High (52.7 FPS) are playable but not ideal for high-refresh displays, while Low settings at 87.3 FPS provide a smoother but visually compromised experience.

Settings Recommendations

Based on the measured rows, the optimal settings depend on your target resolution and refresh rate. At 1920x1080, the High preset delivers 109.1 FPS, which is excellent for most displays. The Medium preset at 132.5 FPS offers a significant boost over High, with a 23.4 FPS improvement that could be worth the visual trade-off for competitive play or high-refresh monitors. Low settings at 179.8 FPS are overkill for most users, as the visual degradation at 1080p is noticeable while the FPS gain over Medium is 47.3 FPS.

For 2560x1440, the High preset at 81.8 FPS is the sweet spot for a balance of visual quality and smoothness. Medium at 97.7 FPS is the best choice for those prioritizing frame rate, offering a 15.9 FPS improvement over High. Ultra at 58.6 FPS is borderline for 60 Hz displays, but the visual uplift may not justify the 23.2 FPS drop from High. Low at 135.4 FPS is viable for esports-style play, but Red Dead Redemption 2 is a visually driven title, so most users will prefer Medium or High.

At 3840x2160, the situation is more constrained. The Medium preset at 66.7 FPS is the recommended starting point, as it provides a playable frame rate with decent visual quality. High at 52.7 FPS is acceptable for 60 Hz panels, but the 14 FPS drop from Medium may not be worth it. Ultra at 40.9 FPS is not recommended for smooth gameplay, as it falls below the 60 FPS threshold and can feel sluggish. Low at 87.3 FPS is the only preset that breaks the 60 FPS barrier at 4K, but the visual hit is severe. The data suggests that Medium is the best overall compromise at 4K, offering a 25.8 FPS advantage over Ultra while maintaining reasonable fidelity.

How This Combo Ranks

This specific combination of the Intel Core i5-14400F and NVIDIA GeForce RTX 4070 Ti ranks 236th out of 1687 tested combos for Red Dead Redemption 2, placing it in the top 14 percent of all configurations. This is a strong showing, indicating that the pairing is well-balanced for this title. The CPU itself sits at the 88th percentile among all processors, and the GPU at the 85th percentile among all graphics cards, so both components are above average for their respective categories.

The CPU's nearest rivals include the Intel Core i7-12800H with an average score of 32513 and a delta of 0 percent, meaning the i5-14400F is effectively tied with it. The AMD Ryzen 5 PRO 7645 is 0.2 percent ahead, while the AMD Ryzen 7 250 and Intel Core i7-13705H are 0.2 percent behind. This tight grouping suggests that the i5-14400F's performance is on par with several mobile H-series and desktop APUs, which is impressive for a locked desktop chip. The GPU's nearest rivals show a similar pattern, with the RTX 5090 Mobile being 0.6 percent ahead and the Intel Arc A730M being 1.5 percent ahead, while the AMD Radeon Pro 580 is 1.6 percent behind.

The rank of 236 out of 1687 reflects the overall performance in this game, and the data indicates that this combo outperforms the vast majority of tested systems. The high rank is likely driven by the GPU's strong 4K and 1440p performance, as well as the CPU's ability to keep up with the GPU at lower resolutions. This is a configuration that punches above its weight class, especially considering the CPU's modest 65 W TDP and the GPU's 285 W TDP.

Measured FPS Breakdown

At 1920x1080, the measured average FPS ranges from 179.8 at Low settings to 78.4 at Ultra. The progression is 179.8 (Low), 132.5 (Medium), 109.1 (High), and 78.4 (Ultra). The difference between Low and Medium is 47.3 FPS, between Medium and High is 23.4 FPS, and between High and Ultra is 30.7 FPS. This shows that the largest performance jump occurs when moving from Low to Medium, while the step from High to Ultra is the most costly in terms of frame rate.

At 2560x1440, the averages are 135.4 (Low), 97.7 (Medium), 81.8 (High), and 58.6 (Ultra). The gaps are 37.7 FPS between Low and Medium, 15.9 FPS between Medium and High, and 23.2 FPS between High and Ultra. The scaling here is similar to 1080p, but the absolute numbers are lower, reflecting the increased pixel load. The drop from 1080p to 1440p is consistent across settings: 44.4 FPS at Low, 34.8 FPS at Medium, 27.3 FPS at High, and 19.8 FPS at Ultra.

At 3840x2160, the averages are 87.3 (Low), 66.7 (Medium), 52.7 (High), and 40.9 (Ultra). The gaps are 20.6 FPS between Low and Medium, 14.0 FPS between Medium and High, and 11.8 FPS between High and Ultra. The differences between settings shrink at 4K, indicating that the GPU is becoming the dominant constraint. The drop from 1440p to 4K is 48.1 FPS at Low, 31.0 FPS at Medium, 29.1 FPS at High, and 17.7 FPS at Ultra. Notably, the absolute frame rates at Ultra (40.9 FPS) are below the 60 FPS target, while Low (87.3 FPS) is the only preset that comfortably exceeds it.

GPU Role

The NVIDIA GeForce RTX 4070 Ti is the primary driver of performance in this title, especially at higher resolutions. Its 12 GB of GDDR6X memory with a 192-bit bus width and 504.2 GB/s bandwidth provides the necessary headroom for Red Dead Redemption 2's detailed textures and open-world environments. At 4K Ultra, the average FPS of 40.9 suggests that the GPU's memory bandwidth and compute capabilities are being fully utilized, as the frame rate drops below the 60 FPS threshold.

The GPU's boost clock of 2610 MHz and base clock of 2310 MHz, combined with 7680 shading units and 80 ROPs, deliver a pixel rate of 208.8 GPixel/s and a texture rate of 626.4 GTexel/s. These specifications translate to strong rasterization performance, which is the core requirement for this title. The FP32 performance of 40.09 TFLOPS and FP16 performance of 40.09 TFLOPS (1:1) indicate that the GPU has substantial compute power, but the measured results show that this is not enough to maintain high frame rates at 4K Ultra.

The GPU's 60 RT cores and 240 tensor cores are present but are not leveraged to any significant degree in this game, as the measured FPS values do not include ray tracing data. The VRAM allocation is a key factor: 12 GB is sufficient for 1080p and 1440p at all settings, but at 4K Ultra, the memory may be a limiting factor, as the frame rate drops to 40.9 FPS. The GPU's performance in this game is consistent with its 85th percentile ranking among all GPUs, and the measured data shows that it excels at 1440p, where it achieves 81.8 FPS at High settings.

FAQ

Q: What is the best resolution for this combo in Red Dead Redemption 2?

A: The data shows that 2560x1440 is the sweet spot, with High settings delivering 81.8 FPS and Medium at 97.7 FPS. At 1920x1080, the performance is higher, but the visual quality at 1440p is superior, and the frame rates remain smooth.

Q: Can this system handle 4K gaming?

A: Yes, but with compromises. At 4K, Medium settings average 66.7 FPS, while High drops to 52.7 FPS and Ultra to 40.9 FPS. Low settings achieve 87.3 FPS, but the visual quality is significantly reduced.

Q: How does the Core i5-14400F compare to its nearest rivals?

A: The i5-14400F is essentially tied with the Intel Core i7-12800H, with a 0 percent delta. It is 0.2 percent behind the AMD Ryzen 5 PRO 7645 and 0.2 percent ahead of the AMD Ryzen 7 250 and Intel Core i7-13705H.

Q: Is the RTX 4070 Ti a bottleneck at 1080p?

A: At 1080p, the GPU is still the limiting factor, as evidenced by the 179.8 FPS at Low and 78.4 FPS at Ultra. The CPU has headroom, but the GPU's performance ceiling prevents higher frame rates at Ultra settings.

Q: What settings should I use for 60 FPS at 4K?

A: The Medium preset at 66.7 FPS is the only setting that exceeds 60 FPS at 4K. High at 52.7 FPS is close but falls short, while Ultra at 40.9 FPS is not sufficient for smooth play.

Q: How does this combo rank against other tested systems?

A: This combination ranks 236th out of 1687 tested combos, placing it in the top 14 percent. This indicates a strong overall performance, driven by the GPU's solid 1440p and 4K results and the CPU's adequate support.

Hardware Specifications

Intel Core i5-14400F

Cores / Threads 10 / 16
Base Clock 2500 MHz
Boost Clock 4700 MHz
TDP 65W
Socket Intel Socket 1700
View Full CPU Details →

NVIDIA GeForce RTX 4070 Ti

VRAM 12 GB GDDR6X
Base Clock —
Boost Clock 2610 MHz MHz
TDP 285 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core i5-14400F + NVIDIA GeForce RTX 4070 Ti in Red Dead Redemption 2

Resolution Settings Avg FPS
3840x2160 Low 87.3
3840x2160 Medium 66.7
3840x2160 High 52.7
3840x2160 Ultra 40.9
2560x1440 Low 135.4
2560x1440 Medium 97.7
2560x1440 High 81.8
2560x1440 Ultra 58.6
1920x1080 Low 179.8
1920x1080 Medium 132.5
1920x1080 High 109.1
1920x1080 Ultra 78.4

Red Dead Redemption 2 with ii5-14400F + Other GPUs

See how Red Dead Redemption 2 performs with the same CPU but different graphics cards.

Red Dead Redemption 2 with RTX 4070 Ti + Other CPUs

See how Red Dead Redemption 2 performs with the same GPU but different processors.

Other Games with ii5-14400F + RTX 4070 Ti

Explore FPS benchmarks for other games using this same hardware combination.