Red Dead Redemption 2
This combination may struggle with this title, averaging 24 FPS. Consider upgrading hardware or significantly lowering settings.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 10 | 14 | 16 | 22 |
| 1440p QHD | 15 | 21 | 25 | 33 |
| 1080p Full HD | 20 | 28 | 33 | 45 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Red Dead Redemption 2 with Intel Core i5-14400F + AMD Radeon RX 570, In-Depth Analysis
The Intel Core i5-14400F pairs a 10-core, 16-thread Raptor Lake design with a 2.50 GHz base clock and a 4.70 GHz boost clock. With an L3 cache of 20 MB shared across the die, this CPU is positioned to handle the simulation and AI workloads that Red Dead Redemption 2 layers on top of its rendering tasks. In synthetic benchmarks, the chip posts a Cinebench R23 multi-core score of 21645 and a single-core score of 3055, while its Geekbench multi-core result of 11268 and single-core score of 2058 indicate strong per-thread performance. The CPU sits at the 83rd percentile among all tested processors, and its average benchmark score of 32279 places it within a tight cluster of rivals — it trails the AMD Ryzen 7 6800HS by 0.2% (32354), leads the AMD Ryzen 7 PRO 8840U by 0.1% (32233), and edges out the Intel Core i9-11900 by 0.2% (32226) and the Intel Core i7-12800H by 0.5% (32121). For a game like Red Dead Redemption 2, which is known for heavy draw-call and physics processing in towns and camps, the 16 threads give this CPU enough headroom to avoid bottlenecking the GPU at lower resolutions, though the data suggests that the GPU becomes the limiting factor well before CPU saturation.
The architecture is Raptor Lake-R built on Intel's 10 nm process, with a die size of 215 mm² and support for both DDR4 and DDR5 memory over a dual-channel bus. ECC memory support is present, and the CPU provides PCIe Gen 5 with 16 lanes from the processor itself. The launch MSRP is $196. The PassMark multi-thread score of 25470 and single-thread score of 3701 reinforce that this is a mid-range desktop part with enough computational muscle for modern titles, but the measured frame rates in this game tell the real story — the CPU's job here is to feed a GPU that is several generations older, and the bottleneck sits squarely on the graphics side.
GPU Role
The AMD Radeon RX 570 is a Polaris 20 chip built on GlobalFoundries' 14 nm process, featuring 2048 shading units, 128 texture mapping units, and 32 ROPs. Its base clock runs at 1168 MHz with a boost clock of 1244 MHz, and the 4 GB of GDDR5 memory operates at 1750 MHz (7 Gbps effective) across a 256-bit bus, yielding 224.0 GB/s of bandwidth. The GPU delivers a pixel rate of 39.81 GPixel/s and a texture rate of 159.2 GTexel/s, with FP32 performance rated at 5.095 TFLOPS. This is an end-of-life product, and its benchmark scores reflect a card that was mid-range in its era: the 3DMark Steel Nomad DX12 score is 880, while Geekbench results show 39349 in Metal, 32084 in OpenCL, and 42752 in Vulkan. The GPU sits at the 74th percentile among all tested GPUs, with an average benchmark score of 28766.
Against its nearest rivals, the RX 570 is tightly grouped: it trails the AMD Radeon RX 6800M by 0.4% (28874) and the AMD Radeon RX 470 by 0.8% (28996), while leading the AMD Radeon R9 M295X by 0.7% (28580) and the NVIDIA Quadro RTX 8000 by 1.2% (28421). The 4 GB VRAM capacity is the critical constraint for Red Dead Redemption 2, a game with expansive open-world textures and high-resolution asset streaming. At 1080p and 1440p, the frame rates show that the GPU is working at its limits, and at 4K, the card is simply overwhelmed. The 256-bit memory bus partially compensates for the modest VRAM size, but the data shows that settings above Medium cause significant frame rate degradation, particularly at higher resolutions where texture memory pressure increases.
FAQ
Q: What is the best resolution for this CPU and GPU combo in Red Dead Redemption 2?
A: The measured data shows that 1920x1080 is the only resolution where the combo achieves playable frame rates across multiple settings. At Low settings it averages 45 FPS, at Medium it averages 33 FPS, and at High it averages 28 FPS. At 2560x1440, the highest average is 33 FPS (Low), and at 3840x2160, the best average is 22 FPS (Low), which falls below playable thresholds.
Q: How does the RX 570's 4 GB VRAM affect performance at higher settings?
A: The frame rate drops between Medium and High settings at 1080p (from 33 FPS to 28 FPS) and between Low and Medium at 1440p (from 33 FPS to 25 FPS) indicate that the 4 GB capacity is stressed as texture quality increases. At 4K, the gap between Low (22 FPS) and Medium (16 FPS) is even more pronounced, suggesting memory bandwidth and capacity limits compound at higher resolutions.
Q: Where does this combo rank among all tested combinations?
A: The combo ranks 3553 out of 3714 tested combinations, placing it in the bottom 5% of all pairings. This reflects the age of the GPU relative to the CPU — the i5-14400F is a modern 14th Gen part, while the RX 570 is an end-of-life product from 2017.
Q: Is the CPU or GPU the bottleneck in this configuration?
A: The data strongly indicates the GPU is the bottleneck. The i5-14400F has a Cinebench R23 multi-core score of 21645 and sits at the 83rd CPU percentile, while the RX 570 has a 3DMark Steel Nomad score of 880 and sits at the 74th GPU percentile. The frame rates scale dramatically with resolution and settings changes, which is characteristic of GPU-bound workloads.
Q: What is the playable settings profile for 1080p?
A: At 1920x1080, Low settings deliver 45 FPS average, Medium delivers 33 FPS (with 28 FPS minimum and 38 FPS maximum), and High delivers 28 FPS. Ultra drops to 20 FPS. Based on the measured rows, Medium at 1080p offers the best balance of visual quality and frame rate stability.
Q: How does the CPU compare to its nearest rivals in processing power?
A: The i5-14400F's average benchmark score of 32279 is nearly identical to its closest rivals: it is 0.1% ahead of the AMD Ryzen 7 PRO 8840U (32233), 0.2% ahead of the Intel Core i9-11900 (32226), and 0.5% ahead of the Intel Core i7-12800H (32121). It trails the AMD Ryzen 7 6800HS (32354) by 0.2%.
Measured FPS Breakdown
The measured frame rates reveal a steep performance cliff as resolution increases. At 1920x1080, the combo delivers its best results: Low settings produce an average of 45 FPS, Medium averages 33 FPS with a minimum of 28 FPS and maximum of 38 FPS, High averages 28 FPS, and Ultra drops to 20 FPS. Moving to 2560x1440, the averages fall by roughly a third: Low averages 33 FPS, Medium averages 25 FPS (minimum 21 FPS, maximum 29 FPS), High averages 21 FPS, and Ultra averages 15 FPS. At 3840x2160, the card is pushed past its limits: Low averages 22 FPS, Medium averages 16 FPS (minimum 14 FPS, maximum 19 FPS), High averages 14 FPS, and Ultra averages 10 FPS.
The pattern across resolutions shows that the RX 570's 4 GB VRAM and 224.0 GB/s bandwidth are the primary constraints. At 1080p, the jump from Low to Medium costs 12 FPS, while the jump from Medium to High costs only 5 FPS — this suggests that Medium is the sweet spot where the GPU still has enough memory bandwidth to maintain consistency. At 1440p, the same settings progression shows a 8 FPS drop from Low to Medium and a 4 FPS drop from Medium to High, indicating that the card is already near its memory ceiling at the lower settings. The 4K results are uniformly unplayable, with even Low settings failing to reach 30 FPS, confirming that this combo is strictly for 1080p or lightweight 1440p gaming.
The min/max data points available for Medium settings show frame time variance that increases with resolution. At 1080p Medium, the range is 28-38 FPS (a 10 FPS spread), at 1440p Medium it is 21-29 FPS (an 8 FPS spread), and at 4K Medium it is 14-19 FPS (a 5 FPS spread). This tightening range at higher resolutions indicates that the GPU is consistently saturated rather than experiencing occasional spikes, which is typical of a card running at its memory bandwidth limit.
How This Combo Ranks
This configuration ranks 3553 out of 3714 tested combos, placing it in the 4.3rd percentile — meaning roughly 96% of all tested CPU-GPU pairings outperform it in this game. The rank is a direct consequence of pairing a modern, high-percentile CPU (83rd percentile) with an end-of-life GPU (74th percentile) that was already mid-range at launch. The i5-14400F's raw compute, evidenced by its 21645 Cinebench R23 multi-core score, is far ahead of what the RX 570 can utilize in a GPU-bound scenario like Red Dead Redemption 2.
The combo's position becomes clearer when considering the GPU's nearest rivals. The RX 570's average benchmark score of 28766 is essentially tied with the RX 6800M (28874, 0.4% faster) and RX 470 (28996, 0.8% faster), while leading the R9 M295X (28580) by 0.7% and the Quadro RTX 8000 (28421) by 1.2%. This grouping at the 74th GPU percentile means the GPU is the limiting factor across the board, and the CPU's proximity to its own rivals (all within 0.5% of each other) does nothing to boost the combo's rank. The measured FPS data confirms this: even at 1080p Low, the 45 FPS average is below what a modern mid-range GPU would deliver, and the 4K results are below playability thresholds.
Settings Recommendations
Based on the measured rows, the only viable path to a smooth experience is 1920x1080 with Medium settings, which yields an average of 33 FPS with a minimum of 28 FPS. This provides a stable frame rate window that avoids the steep drop to High (28 FPS average) and the sub-30 FPS dips that occur in demanding scenes. The minimum of 28 FPS at Medium suggests that the card can hold close to 30 FPS even in stress moments, whereas High's average of 28 FPS leaves no headroom for frame time spikes.
For players who prioritize frame rate over visual fidelity, 1080p Low at 45 FPS average is the smoothest option available on this hardware. The 12 FPS gain over Medium is substantial, and given that the game's open-world environments benefit more from consistent frame pacing than from texture detail, Low may be the better choice for action-heavy sequences. However, the Medium preset at 1080p offers the best balance: it maintains a minimum of 28 FPS, which is borderline playable, while providing noticeably better visual quality than Low.
At 2560x1440, the data shows that only Low settings (33 FPS average) approach playability, but the margin for error is thin — Medium drops to 25 FPS average with a 21 FPS minimum, which will feel stuttery in combat or riding sequences. The 3840x2160 results are uniformly below 23 FPS across all settings, making 4K unplayable for this combo. The recommendation is clear: run the game at 1920x1080 with Medium settings for the best experience, or drop to Low if frame rate consistency is paramount. The Ultra preset is not recommended at any resolution, as it produces 20 FPS at 1080p and 10 FPS at 4K — a 50% reduction from High at the same resolution, which is a poor trade for the marginal visual improvements.
Hardware Specifications
Intel Core i5-14400F
AMD Radeon RX 570
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core i5-14400F + AMD Radeon RX 570 in Red Dead Redemption 2
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 22.0 |
| 3840x2160 | Medium | 16.0 |
| 3840x2160 | High | 14.0 |
| 3840x2160 | Ultra | 10.0 |
| 2560x1440 | Low | 33.0 |
| 2560x1440 | Medium | 25.0 |
| 2560x1440 | High | 21.0 |
| 2560x1440 | Ultra | 15.0 |
| 1920x1080 | Low | 45.0 |
| 1920x1080 | Medium | 33.0 |
| 1920x1080 | High | 28.0 |
| 1920x1080 | Ultra | 20.0 |
Red Dead Redemption 2 with ii5-14400F + Other GPUs
See how Red Dead Redemption 2 performs with the same CPU but different graphics cards.
Red Dead Redemption 2 with RX 570 + Other CPUs
See how Red Dead Redemption 2 performs with the same GPU but different processors.
Other Games with ii5-14400F + RX 570
Explore FPS benchmarks for other games using this same hardware combination.