Red Dead Redemption 2

Red Dead Redemption 2

AVERAGE FPS
23
limited

This combination may struggle with this title, averaging 23 FPS. Consider upgrading hardware or significantly lowering settings.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 8 12 16 23
1440p QHD 15 21 26 36
1080p Full HD 23 26 34 43

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 23
3840x2160 Medium 16
3840x2160 High 12
3840x2160 Ultra 8
2560x1440 Low 36
2560x1440 Medium 26
2560x1440 High 21
2560x1440 Ultra 15
1920x1080 Low 43
1920x1080 Medium 34
1920x1080 High 26
1920x1080 Ultra 23

Red Dead Redemption 2 with Intel Core i5-11400F + AMD Radeon RX 570, In-Depth Analysis

How This Combo Ranks

The Intel Core i5-11400F paired with the AMD Radeon RX 570 ranks 1630th out of 1687 tested combos in Red Dead Redemption 2. This places the combination in the 4th percentile of all systems tested, meaning roughly 96% of configurations deliver higher average frame rates. The ranking reflects a fundamental imbalance: the CPU sits at the 75th percentile among all processors, while the GPU sits at the 74th percentile among all graphics cards, yet their combined performance in this specific title falls far lower than those individual standings suggest. This gap between component-level percentiles and the in-game combo rank indicates that the pairing struggles to translate its raw hardware potential into playable frame rates in this particular title. The Core i5-11400F shows competitive synthetic scores against its nearest rivals, including the AMD Ryzen 7 5700U with a 0% delta and the Intel Core i7-1260P at -0.2%, but those close benchmark margins do not carry over to real-world gaming results. Similarly, the RX 570's average benchmark score of 30158 places it just 0.2% ahead of the NVIDIA GeForce RTX 5060 and 0.2% behind the AMD Radeon RX 7700 XT, yet these near-parity synthetic results do not translate into competitive Red Dead Redemption 2 performance.

GPU Role

The AMD Radeon RX 570 brings 4 GB of GDDR5 memory across a 256-bit bus, yielding 224.0 GB/s of bandwidth. Its memory clock runs at 1750 MHz, with a base GPU clock of 1168 MHz and a boost clock of 1244 MHz. The card's 2048 shading units, 128 texture mapping units, and 32 raster output pipelines process pixels at 39.81 GPixel/s and textures at 159.2 GTexel/s. Peak FP32 throughput reaches 5.095 TFLOPS. These specifications suggest a card designed for 1080p gaming at moderate settings, and the measured data confirms this expectation. However, the 4 GB VRAM capacity becomes a critical constraint in Red Dead Redemption 2, a title known for large texture datasets. The data shows that at 1080p Low, the combo achieves 43 FPS, but stepping up to Medium drops to 33.8 FPS, and High falls to 26.4 FPS. The VRAM limitation likely compounds the performance degradation at higher settings, as the card must manage memory swapping when texture budgets exceed 4 GB. The GPU's 14 nm Polaris 20 chip, built by GlobalFoundries with 5,700 million transistors on a 232 mm² die, represents an older architecture that lacks modern hardware features like dedicated ray tracing cores or tensor cores, both of which are absent from the specifications.

Resolution Scaling

The measured frame rates reveal a steep performance cliff as resolution increases. At 1080p Low, the combo delivers 43 FPS, which drops to 36.2 FPS at 1440p Low (a 15.8% reduction) and further to 22.5 FPS at 4K Low (a 47.7% reduction from 1080p). The scaling pattern across all settings shows that the GPU becomes the dominant limiting factor at higher resolutions. At 1080p High, the system produces 26.4 FPS; at 1440p High, it falls to 20.5 FPS; at 4K High, it collapses to 11.5 FPS. The 4K Ultra result of 7.6 FPS is essentially unplayable, while 4K Medium manages only 15.8 FPS. The resolution scaling data suggests that the RX 570's 224.0 GB/s memory bandwidth and 5.095 TFLOPS of compute throughput are insufficient to maintain playable frame rates beyond 1080p. The gap between Low and Ultra settings widens dramatically at higher resolutions: at 1080p, the difference between Low and Ultra is 20.3 FPS, while at 4K, the same settings gap is only 14.9 FPS. This narrowing difference indicates that at 4K, resolution overhead dominates and settings adjustments yield diminishing returns.

Measured FPS Breakdown

At 1920x1080, the combo produces its most viable results. Low settings average 43 FPS, Medium averages 33.8 FPS, High averages 26.4 FPS, and Ultra averages 22.7 FPS. The 1080p Low result is the only configuration in the entire measured set that approaches a stable 60 FPS target, though it still falls 17 FPS short. Moving to 2560x1440, performance drops noticeably: Low averages 36.2 FPS, Medium averages 25.9 FPS, High averages 20.5 FPS, and Ultra averages 14.6 FPS. None of these 1440p results reach 40 FPS, and the Ultra setting dips below 15 FPS. At 3840x2160, the results are marginal at best. Low averages 22.5 FPS, Medium averages 15.8 FPS, High averages 11.5 FPS, and Ultra averages 7.6 FPS. The 4K Ultra result represents the worst measured performance, sitting below 10 FPS. Across all twelve measured configurations, the average frame rates range from a high of 43 FPS at 1080p Low to a low of 7.6 FPS at 4K Ultra. The data shows no configuration reaches 60 FPS, and only three configurations exceed 30 FPS: 1080p Low at 43 FPS, 1080p Medium at 33.8 FPS, and 1440p Low at 36.2 FPS.

Settings Recommendations

Based on the measured frame rates, the optimal configuration for this combo is 1080p Low, which delivers 43 FPS. This is the only setting that provides a frame rate above 40 FPS, making it the most playable option for general use. The 1080p Medium setting at 33.8 FPS offers a reasonable compromise for users who prioritize visual quality over frame rate, staying above the 30 FPS threshold commonly considered the minimum for acceptable playability. The 1440p Low setting at 36.2 FPS is the best option for users who prefer higher resolution, though it sacrifices visual fidelity through the Low preset. All other configurations fall below 30 FPS, with 1080p High at 26.4 FPS and 1080p Ultra at 22.7 FPS representing playable-but-suboptimal choices. For users who cannot tolerate frame rates below 30 FPS, the viable options are limited to 1080p Low, 1080p Medium, and 1440p Low. The data suggests that the High and Ultra presets are not recommended at any resolution, as even at 1080p they produce frame rates below 27 FPS. The 4K resolution should be avoided entirely, as the best 4K result (Low at 22.5 FPS) falls below the minimum playable threshold.

CPU Role

The Intel Core i5-11400F contributes 6 cores and 12 threads based on the Rocket Lake architecture, built on Intel's 14 nm process. Its base clock runs at 2.60 GHz with a boost clock of 4.40 GHz, and the 12 MB shared L3 cache provides 80 KB of L1 and 512 KB of L2 per core. The CPU supports DDR4 memory in dual-channel configuration with 51.2 GB/s of memory bandwidth, and it connects via PCIe Gen 4 with 20 lanes. Synthetic benchmarks show the CPU's multi-threaded capabilities: Cinebench R23 multi-core scores 14372, while single-core scores 2029; Geekbench multi-core reaches 7579 and single-core 1979. The 3DMark 16-thread test scores 5619, and the max-thread score of 5652 indicates strong scaling across all 12 threads. PassMark multi-thread scores 16908, with floating-point math at 34127 and integer math at 57624. These CPU metrics suggest the i5-11400F has ample processing power for gaming workloads. However, in Red Dead Redemption 2, the CPU is not the primary bottleneck. The measured frame rates show that even at 1080p Low, where CPU load is typically highest relative to GPU load, the system only reaches 43 FPS. This indicates the GPU's computational limits constrain performance. The CPU's 75th percentile ranking among all processors, combined with its competitive scores against the AMD Ryzen 7 5700U (0% delta) and Intel Core i7-1260P (-0.2% delta), confirms that the i5-11400F provides sufficient processing headroom. The bottleneck lies with the RX 570, whose 74th percentile GPU ranking and 30158 average benchmark score cannot keep pace with the CPU's output in this title.

Hardware Specifications

Intel Core i5-11400F

Cores / Threads 6 / 12
Base Clock 2600 MHz
Boost Clock 4400 MHz
TDP 65W
Socket Intel Socket 1200
View Full CPU Details →

AMD Radeon RX 570

VRAM 4 GB GDDR5
Base Clock —
Boost Clock 1244 MHz MHz
TDP 150 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core i5-11400F + AMD Radeon RX 570 in Red Dead Redemption 2

Resolution Settings Avg FPS
3840x2160 Low 22.5
3840x2160 Medium 15.8
3840x2160 High 11.5
3840x2160 Ultra 7.6
2560x1440 Low 36.2
2560x1440 Medium 25.9
2560x1440 High 20.5
2560x1440 Ultra 14.6
1920x1080 Low 43.0
1920x1080 Medium 33.8
1920x1080 High 26.4
1920x1080 Ultra 22.7

Red Dead Redemption 2 with ii5-11400F + Other GPUs

See how Red Dead Redemption 2 performs with the same CPU but different graphics cards.

Red Dead Redemption 2 with RX 570 + Other CPUs

See how Red Dead Redemption 2 performs with the same GPU but different processors.

Other Games with ii5-11400F + RX 570

Explore FPS benchmarks for other games using this same hardware combination.