Red Dead Redemption 2

The AMD Ryzen 7 5700G and NVIDIA GeForce RTX 4060 combination delivers a playable but varied experience in Red Dead Redemption 2, with performance scaling predictably across resolutions and presets. The data shows a system that is firmly GPU-limited at higher resolutions, while at 1080p the CPU’s capabilities become more relevant. This analysis breaks down the measured frame rates, component roles, and how this specific pairing ranks against the broader database of tested configurations.

FAQ

Q: What is the best resolution for this combo in Red Dead Redemption 2?

A: Based on the measured data, 1920x1080 is the only resolution where all presets achieve playable frame rates. At 2560x1440, only Low and Medium presets stay above 60 FPS, while at 3840x2160, even the Low preset only reaches 54 FPS.

Q: How does the RTX 4060’s VRAM capacity affect performance at 4K?

A: The GPU has 8 GB of GDDR6 memory on a 128-bit bus with 272.0 GB/s bandwidth. The measured results show a sharp drop at 3840x2160, with the Ultra preset falling to 24 FPS, indicating that both memory capacity and bandwidth become limiting factors at this resolution.

Q: Is the Ryzen 7 5700G a bottleneck for the RTX 4060 in this game?

A: Benchmark data suggests the CPU is capable, scoring 12,830.5 in Cinebench R23 multi-core and 1,494 in single-core. The frame rate scaling from 1080p to 1440p shows a consistent drop, which points to the GPU being the primary constraint rather than the CPU.

Q: What is the difference between Medium and High settings at 1440p?

A: The Medium preset averages 61 FPS, while High drops to 51 FPS. This 10 FPS difference is significant for smoothness, as it moves the experience from comfortably above 60 FPS to below that threshold.

Q: How does this combo rank compared to all tested combinations?

A: The combo ranks 2013 out of 3714 tested combos, placing it in the lower-middle portion of the database. This ranking reflects its performance in this specific game, not overall hardware capability.

Q: Does the Ultra preset provide a better experience than High at 1080p?

A: No. At 1080p, High averages 69 FPS, while Ultra drops to 49 FPS. The 20 FPS loss for the Ultra preset makes High the better choice for maintaining a smoother frame rate.

GPU Role

The NVIDIA GeForce RTX 4060 is the primary driver of frame rates in this configuration, particularly as resolution increases. Its specifications include 3,072 shading units, 96 TMUs, and 48 ROPs, with a boost clock of 2460 MHz. The GPU’s 8 GB of GDDR6 memory on a 128-bit bus provides 272.0 GB/s of bandwidth, which is a critical factor for Red Dead Redemption 2’s large textures and open-world streaming.

The measured data shows a clear pattern: at 1920x1080, the GPU has enough headroom to push frame rates above 100 FPS on Low settings. However, as resolution climbs to 2560x1440 and then 3840x2160, the pixel count doubles and then quadruples, placing increasing strain on the memory subsystem. The 128-bit bus width becomes a bottleneck at 4K, where the Low preset only manages 54 FPS and Ultra falls to 24 FPS.

The RTX 4060’s FP32 performance is rated at 15.11 TFLOPS, which is substantial for a card in this class. Yet the data indicates that raw compute power is not the limiting factor in this game. Instead, the 8 GB VRAM capacity and 272.0 GB/s bandwidth are the constraining elements at higher resolutions. The gap between Low and Medium at 4K is 13 FPS (54 vs 41), while the gap between Medium and High is only 7 FPS (41 vs 34). This suggests that the memory subsystem is saturated, and incremental preset changes have diminishing returns.

Resolution Scaling

Frame rate scaling from 1080p to 4K reveals the nature of the workload. At Low settings, the progression is 110 FPS at 1080p, 82 FPS at 1440p, and 54 FPS at 4K. This represents a 25% drop from 1080p to 1440p, and a further 34% drop from 1440p to 4K. The scaling is not linear, indicating that memory bandwidth constraints become more severe at higher pixel counts.

For the Medium preset, the numbers are 82 FPS at 1080p, 61 FPS at 1440p, and 41 FPS at 4K. The percentage drops are similar, with a 26% reduction from 1080p to 1440p and a 33% reduction from 1440p to 4K. This consistency across presets suggests that the GPU’s memory subsystem is the limiting factor, rather than the shader core throughput.

The High preset shows a different pattern: 69 FPS at 1080p, 51 FPS at 1440p, and 34 FPS at 4K. The drop from 1440p to 4K is 33%, which aligns with the other presets. However, the absolute frame rates at 4K are all below the 60 FPS threshold, confirming that this resolution is not viable for this combination. The data indicates that the RTX 4060 is the limiting component at all resolutions, as the frame rate scales inversely with pixel count in a predictable manner.

Measured FPS Breakdown

At 1920x1080, the combo delivers its best results. The Low preset averages 110 FPS, providing a very smooth experience. Medium averages 82 FPS with a minimum of 70 and maximum of 95, which shows solid frame pacing. High averages 69 FPS, still above the 60 FPS target. Ultra drops to 49 FPS, which is below the smoothness threshold but still playable for some users.

Moving to 2560x1440, the frame rates decrease across the board. Low averages 82 FPS, which is identical to the 1080p Medium result. Medium averages 61 FPS with a minimum of 52 and maximum of 71, putting it right at the edge of the 60 FPS mark. High averages 51 FPS, which is noticeably less smooth. Ultra averages 37 FPS, making it difficult to recommend for any but the most visually-focused players.

At 3840x2160, the performance drops significantly. Low averages 54 FPS, which is the only preset that comes close to playable. Medium averages 41 FPS with a minimum of 35 and maximum of 47. High averages 34 FPS, and Ultra averages 24 FPS. The data shows that 4K is reserved for Low and Medium presets, and even then, the experience is not consistently smooth.

The minimum and maximum frame rate data for Medium presets provides insight into frame pacing. At 1080p, the range is 70 to 95 FPS, a spread of 25 FPS. At 1440p, the range is 52 to 71 FPS, a spread of 19 FPS. At 4K, the range is 35 to 47 FPS, a spread of 12 FPS. This tightening of the range at higher resolutions suggests that the GPU is more consistently saturated, reducing variance but also lowering the average.

CPU Role

The AMD Ryzen 7 5700G is an 8-core, 16-thread processor based on the Zen 3 architecture. It has a base clock of 3.80 GHz and a boost clock of 4.60 GHz, with 16 MB of L3 cache. Benchmark results show strong multi-threaded performance, with a Cinebench R23 multi-core score of 12,830.5 and a single-core score of 1,494. Its Passmark multi-thread score is 24,419, and the single-thread score is 3,283.

In Red Dead Redemption 2, the CPU’s role is to feed the GPU with draw calls and handle game logic. The data indicates that the 5700G is sufficient for this task at 1080p, where the GPU is the bottleneck. The fact that frame rates scale down consistently at higher resolutions confirms that the CPU is not limiting performance, as a CPU bottleneck would cause frame rates to plateau regardless of resolution.

The CPU’s 16 threads are well-suited for modern games that can utilize multiple cores. Its 3DMark multi-thread score of 6,629 and 8-thread score of 5,648 show good scaling across core counts. The nearest rival, the Intel Core i9-9900K, has an average score of 27,097, which is only 0.2% higher than the 5700G’s 27,051. This puts the 5700G in a competitive position for gaming workloads.

However, the CPU’s memory bandwidth of 51.2 GB/s is modest, and this could become a factor in scenarios where the CPU needs to stream large amounts of data. In this game, the data does not show evidence of such a bottleneck, as the frame rate scaling is consistent with GPU limitations.

Settings Recommendations

Based on the measured frame rates, the best experience for this combo is at 1920x1080 with the High preset. This yields an average of 69 FPS, which is above the 60 FPS target for smooth gameplay. The Medium preset at 1080p offers 82 FPS, providing more headroom, but the visual quality difference may not justify the extra 13 FPS.

For users prioritizing frame rate above all else, the Low preset at 1080p delivers 110 FPS, which is excellent for high-refresh-rate displays. The Ultra preset at 1080p is not recommended, as the 49 FPS average is below the smoothness threshold and the visual gains over High are typically marginal in this game.

At 2560x1440, the Medium preset is the only option that stays above 60 FPS, with an average of 61 FPS. The Low preset averages 82 FPS, offering a more stable experience if visual fidelity is less important. High and Ultra at 1440p are not recommended due to their 51 and 37 FPS averages, respectively.

At 3840x2160, none of the presets achieve 60 FPS. The Low preset at 54 FPS is the most playable, but users should expect occasional dips. The Medium preset at 41 FPS is borderline, and High and Ultra are too slow for a good experience. For 4K, users would need to lower resolution scaling or accept lower frame rates.

How This Combo Ranks

The combination of the Ryzen 7 5700G and RTX 4060 ranks 2013 out of 3714 tested combos in Red Dead Redemption 2. This places it in the 54th percentile, meaning it performs better than just over half of all tested configurations. Given the hardware’s specifications, this ranking is reasonable, as the RTX 4060 is a mid-range GPU and the 5700G is a capable but not top-tier CPU.

The CPU’s average benchmark score of 27,051 places it in the 79th percentile of all CPUs, showing that the processor is above average. The GPU’s average score of 17,639 places it in the 61st percentile of all GPUs, which is also above average. The combination of two above-average components results in a system that performs adequately but not exceptionally in this demanding game.

The nearest rivals to this CPU include the Intel Core i9-9900K with a delta of -0.2%, and the AMD Ryzen AI 7 445 with a delta of 0.4%. These small deltas indicate that the 5700G is well-matched against other mid-range to high-end processors. The GPU’s nearest rivals are older or integrated solutions like the AMD Radeon HD 7790 and Radeon 780M, which shows that the RTX 4060 is in a distinct performance class.

The combo’s rank of 2013 suggests that while the hardware is capable, there are many other configurations that achieve higher frame rates in this game. This is largely due to the GPU’s 8 GB VRAM and 128-bit bus, which limit performance at higher resolutions. For users targeting 1080p or 1440p, this combo provides a solid experience, but for 4K, it falls short of the performance needed for a consistently smooth frame rate.