Red Dead Redemption 2

Red Dead Redemption 2

AVERAGE FPS
113
good

This combination provides smooth gameplay with an average of 113 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 45 66 81 106
1440p QHD 72 99 121 160
1080p Full HD 100 134 161 215

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 106
3840x2160 Medium 81
3840x2160 High 66
3840x2160 Ultra 45
2560x1440 Low 160
2560x1440 Medium 121
2560x1440 High 99
2560x1440 Ultra 72
1920x1080 Low 215
1920x1080 Medium 161
1920x1080 High 134
1920x1080 Ultra 100

Red Dead Redemption 2 with AMD Ryzen 5 9600X + NVIDIA GeForce RTX 4090, In-Depth Analysis

# How This Combo Ranks

This combo ranks 43rd out of 1,687 tested combinations in Red Dead Redemption 2, placing it in the top 2.5% of all tested hardware pairings. That rank is driven by the RTX 4090's raw throughput, but the Ryzen 5 9600X holds its own as the supporting component. In practical terms, this is a top-tier pairing that will crush the game's most demanding settings at high resolutions, with a clear ceiling only at 4K Ultra where the GPU's workload becomes extreme.

The rank of 43 means roughly 1,644 other combos land below this pairing, but it also signals that a handful of CPU-GPU combinations outperform it — likely those pairing the RTX 4090 with even stronger CPUs. Still, the delta between this combo and the very top is small in real-world play, as the measured FPS at 1440p and 1080p shows the GPU is rarely the bottleneck until you push to 4K Ultra.

# GPU Role

The NVIDIA GeForce RTX 4090 is the dominant force here. It carries 24 GB of GDDR6X memory on a 384-bit bus, delivering 1.01 TB/s of bandwidth — a figure that matters enormously in Red Dead Redemption 2's open world, which streams textures and geometry constantly. The AD102 chip runs at 2235 MHz base and boosts to 2520 MHz, with 16,384 shading units and 128 RT cores handling the game's lighting and shadow work.

The GPU's FP32 performance of 82.58 TFLOPS is what lets it push 4K High at 65.5 FPS and 1440p High at 98.7 FPS. The memory subsystem is the key enabler: at 4K Ultra, the card draws on its 24 GB pool and 384-bit bus to avoid stutter from texture thrashing, which is why the 4K Ultra result of 44.6 FPS stays playable despite the massive load. Compare that with the GPU's benchmark percentile of 91 versus all GPUs — it sits near the top of the stack, and its nearest rivals in average score (like the Tesla T4 at -0.4% and Quadro P6000 at -1.3%) are professional cards, not gaming parts, so the 4090's gaming lead is even wider than raw scores suggest.

At 1080p, the GPU is almost overkill. The 214.6 FPS Low and 160.8 FPS Medium results show the card's headroom, but the 133.9 FPS High and 99.8 FPS Ultra figures indicate the CPU starts to matter more as settings drop. The 450 W TDP and 850 W suggested PSU are worth noting for system planning, but the performance per frame is exceptional — this is the fastest gaming GPU in the test pool by a wide margin.

# FAQ

Q: Can this combo run Red Dead Redemption 2 at 4K smoothly?

A: Yes, at High settings you get 65.5 FPS average, which is fluid. At Medium it's 80.7 FPS, but Ultra drops to 44.6 FPS — playable but not ideal for fast-paced action. For 60+ FPS at 4K, stick to High or Medium.

Q: How does the Ryzen 5 9600X compare to its closest CPU rivals?

A: The 9600X averages 28,246 in benchmark scores, sitting 0.3% ahead of the Intel Core i5-13490F and AMD Ryzen 5 230, while trailing the Ryzen 7 8845HS by 0.4% and the Core i5-14500T by 0.5%. It's a tight pack, but the 9600X edges out the two desktop chips.

Q: Is the RTX 4090's 24 GB VRAM necessary for this game?

A: At 4K Ultra, the game pushes memory hard, and the 24 GB GDDR6X with 1.01 TB/s bandwidth prevents texture pop-in and stutter. You don't need all of it at 1080p, but for 4K High or Ultra, the capacity and bandwidth are what keep frame times stable.

Q: What's the best settings preset for a 144Hz monitor at 1440p?

A: High settings deliver 98.7 FPS, which is close to 100 FPS but not 144Hz. Medium hits 120.7 FPS, and Low reaches 160.1 FPS. If you want to fully saturate a 144Hz panel, Low is the only preset that does it, but Medium is the best balance of visual quality and frame rate.

Q: How does the 9600X's single-thread performance affect this game?

A: The 3DMark single-thread score of 1,253 and Cinebench R23 single-core score of 3,603 show strong per-core performance. Red Dead Redemption 2 scales with multi-core, but the 6 cores / 12 threads at boost clocks up to 5.40 GHz ensure the game's main thread never becomes a bottleneck at 1080p or 1440p.

Q: Is this combo future-proof for upcoming titles?

A: The Zen 5 architecture on 4 nm with 32 MB L3 cache and the Ada Lovelace GPU with DirectX 12 Ultimate support position this well. The CPU's 85th percentile ranking and the GPU's 91st percentile mean both parts are near the top of their respective stacks today.

# Measured FPS Breakdown

At 1920x1080, the combo delivers its highest frame rates. Low settings produce 214.6 FPS, Medium drops to 160.8 FPS, High yields 133.9 FPS, and Ultra sits at 99.8 FPS. The jump from Low to Medium is a 53.8 FPS loss, while High to Ultra costs 34.1 FPS — the latter being the steeper penalty, indicating the Ultra preset's extra effects hit the GPU hard even at 1080p.

At 2560x1440, the pattern shifts. Low runs at 160.1 FPS, Medium at 120.7 FPS, High at 98.7 FPS, and Ultra at 71.8 FPS. The gap between Medium and High is 22 FPS, and High to Ultra is 26.9 FPS. This resolution is the sweet spot for the RTX 4090 — you can run High comfortably above 60 FPS and Medium well above 100 FPS.

At 3840x2160, results compress dramatically. Low hits 106.3 FPS, Medium 80.7 FPS, High 65.5 FPS, and Ultra 44.6 FPS. The drop from Medium to High is 15.2 FPS, and High to Ultra is 20.9 FPS. The 4K Ultra result is the only one below 60 FPS across all resolutions and settings, confirming that the 4090's limits are only reached at maximum settings in 4K.

The scaling efficiency is notable: from 1080p Low to 4K Low, you lose 108.3 FPS, but from 1080p High to 4K High, you only lose 68.4 FPS. This suggests the GPU is more bandwidth-bound at lower settings, where the CPU can feed frames faster than the memory subsystem can sustain at 4K.

# CPU Role

The AMD Ryzen 5 9600X is a 6-core, 12-thread processor based on Zen 5 architecture (Granite Ridge), built on TSMC's 4 nm process. It boosts to 5.40 GHz from a 3.90 GHz base, with 32 MB of shared L3 cache and 80 KB L1 plus 1 MB L2 per core. The 89.6 GB/s memory bandwidth on DDR5 is adequate for feeding the RTX 4090, though it's not the fastest available.

In this game, the CPU's role is to keep the GPU fed. At 1080p Low, the 214.6 FPS result shows the 9600X can push frames fast enough to saturate the 4090's processing capacity. The 3DMark max-thread score of 7,590 and Cinebench R23 multi-core score of 25,525 indicate solid multi-threaded throughput, but Red Dead Redemption 2 benefits more from the high single-core boost clock — the 3DMark single-thread score of 1,253 and Geekbench single-core score of 3,363 are strong for a 6-core chip.

At 4K Ultra, the CPU matters less — the 44.6 FPS result is GPU-bound, as the 4090's 82.58 TFLOPS of FP32 compute is the limiting factor. But at 1080p and 1440p, the 9600X's 5.40 GHz boost ensures the game's simulation and physics threads don't bottleneck the GPU. The avg benchmark score of 28,246 places it in the 85th percentile of all CPUs, and its nearest rivals — the i5-13490F and Ryzen 5 230 — are within 0.3%, meaning the 9600X is competitively positioned for this workload.

The 65 W TDP is remarkably efficient for the performance delivered, and the PCIe Gen 5 support with 24 lanes means the GPU has ample bandwidth for data transfer, though the RTX 4090 uses PCIe 4.0 x16 — which is more than sufficient here.

# Settings Recommendations

For 4K resolution, the data clearly favors High settings at 65.5 FPS. Medium at 80.7 FPS is smoother but visually less rich, while Ultra at 44.6 FPS sacrifices too much fluidity for marginal visual gains. High is the best compromise — it stays above 60 FPS and preserves most of the game's visual fidelity.

At 1440p, Medium settings at 120.7 FPS offer the best experience if you have a 120Hz or 144Hz display. High at 98.7 FPS is nearly as good and looks better, so the choice depends on whether you prioritize frame rate or image quality. For 60Hz monitors, High is the no-brainer — it's well above 60 FPS and looks great. Ultra at 71.8 FPS is also viable on 60Hz displays, giving you the full visual experience without dropping below 60.

At 1080p, the combo is so fast that Low settings at 214.6 FPS are only useful for competitive play or extremely high refresh rate monitors (240Hz+). For most users, High at 133.9 FPS is the sweet spot — it's well above 120 FPS and looks significantly better than Medium. Ultra at 99.8 FPS is the best visual option and still clears 60 FPS by a huge margin, so it's a reasonable pick for 144Hz panels if you prefer image quality over maximum frame rate.

The overall recommendation: High settings at 4K for a 60Hz display, Medium or High at 1440p for 120-144Hz displays, and High at 1080p for 144Hz. Avoid Ultra at 4K unless you're okay with sub-60 FPS, and avoid Low at 1080p unless you're chasing maximum frame rates for esports-style play — though Red Dead Redemption 2 isn't that kind of title. The RTX 4090's 24 GB VRAM and the 9600X's 5.40 GHz boost make this a combo that never feels underpowered, only settings-limited at 4K Ultra.

Hardware Specifications

AMD Ryzen 5 9600X

Cores / Threads 6 / 12
Base Clock 3900 MHz
Boost Clock 5400 MHz
TDP 65W
Socket AMD Socket AM5
View Full CPU Details →

NVIDIA GeForce RTX 4090

VRAM 24 GB GDDR6X
Base Clock —
Boost Clock 2520 MHz MHz
TDP 450 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 9600X + NVIDIA GeForce RTX 4090 in Red Dead Redemption 2

Resolution Settings Avg FPS
3840x2160 Low 106.3
3840x2160 Medium 80.7
3840x2160 High 65.5
3840x2160 Ultra 44.6
2560x1440 Low 160.1
2560x1440 Medium 120.7
2560x1440 High 98.7
2560x1440 Ultra 71.8
1920x1080 Low 214.6
1920x1080 Medium 160.8
1920x1080 High 133.9
1920x1080 Ultra 99.8

Red Dead Redemption 2 with Ryzen 5 9600X + Other GPUs

See how Red Dead Redemption 2 performs with the same CPU but different graphics cards.

Red Dead Redemption 2 with RTX 4090 + Other CPUs

See how Red Dead Redemption 2 performs with the same GPU but different processors.

Other Games with Ryzen 5 9600X + RTX 4090

Explore FPS benchmarks for other games using this same hardware combination.