Ready Or Not

Ready Or Not is a demanding tactical shooter, and the Intel Core i7-12700KF paired with the AMD Radeon RX 7700 proves to be a potent combination, though the data reveals a clear performance hierarchy that shifts depending on resolution. Benchmark results indicate a system that can dominate at 1080p, remain highly capable at 1440p, and still deliver a playable experience at 4K, with the GPU acting as the primary scaling factor.

Resolution Scaling

The measured FPS data shows a classic GPU-bound scaling pattern across the three resolutions. At 1080p with High settings, the combo delivers an average of 224 FPS. Moving to 1440p drops that to 141 FPS, a reduction of approximately 37%. The jump to 4K (2160p) further reduces the average to 74 FPS, which is about a 67% decrease from the 1080p baseline. This steep decline as resolution increases is the hallmark of a system where the graphics card is the limiting component.

The pattern is consistent across all quality presets. With Low settings, the average FPS goes from 282 at 1080p, to 178 at 1440p, and finally to 93 at 4K. The Ultra preset sees a similar trend, starting at 157 FPS at 1080p, dropping to 99 FPS at 1440p, and settling at 52 FPS at 4K. The fact that the FPS nearly halves when moving from 1440p to 4K on every preset strongly suggests that the Radeon RX 7700's rendering pipeline is being saturated, rather than the CPU holding the system back.

The relationship between settings and resolution also offers insight into the bottleneck. At 1080p, the difference between Low (282 FPS) and Ultra (157 FPS) is a massive 125 FPS. This wide gap indicates that while the CPU is capable of feeding the GPU enough data to reach very high frame rates, the GPU's workload at higher settings becomes the deciding factor. However, at 4K, the gap between Low (93 FPS) and Ultra (52 FPS) is only 41 FPS. This compression of the performance range at higher resolutions further confirms that the GPU is the primary constraint, as it struggles to process the increased pixel count regardless of the complexity of the scene.

The medium preset data provides the only min/max FPS values in the pack. At 4K Medium, the average is 81 FPS, with a minimum of 69 and a maximum of 93. At 1440p Medium, the average is 155 FPS, with a minimum of 132 and a maximum of 178. At 1080p Medium, the average is 246 FPS, with a minimum of 209 and a maximum of 283. These ranges show that frame pacing is relatively stable, with no extreme dips that would suggest stuttering or CPU hiccups. The data clearly indicates that for players seeking the highest refresh rates, 1080p is the target, while 4K is best reserved for those who prioritize visual fidelity over raw frame rate.

How This Combo Ranks

In the grand scheme of tested hardware combinations, this pairing of the Core i7-12700KF and Radeon RX 7700 holds a respectable position. The benchmark results place this combo at rank 1336 out of 2947 total combos for Ready Or Not. This places it in the top half of all systems tested, indicating a solid, mid-to-upper-tier performance level.

The percentile ranking for the individual components reinforces this assessment. The CPU sits in the 85th percentile when compared to all other CPUs, showing that its processing power is well above average. The GPU, however, is in the 58th percentile when compared to all other GPUs. This disparity suggests that while the CPU is a high-end performer, the GPU is a more mid-range component, and it is likely the factor preventing this combo from ranking even higher.

The combo's overall rank is a synthesis of these two parts. A top-tier CPU paired with a mid-range GPU will often land in the upper-middle of the overall rankings, as the GPU becomes the limiting factor in graphically intensive games like Ready Or Not. The performance data supports this, showing that the system is capable of high frame rates, but not at the level of combos featuring more powerful GPUs. It is a balanced system in the sense that the CPU has headroom to spare, but it is not a balanced pairing in terms of pure performance ceiling.

CPU Role

The Intel Core i7-12700KF is a 12-core, 20-thread processor based on the Alder Lake architecture. It features a base clock of 3.60 GHz and a boost clock of 5.00 GHz. This high boost clock is critical for gaming, as it ensures strong single-thread performance, which many titles, including tactical shooters, rely on for game logic and physics.

In this specific setup, the CPU's role appears to be that of an enabler. At 1080p, the high average FPS figures (282 FPS on Low, 224 FPS on High) demonstrate that the CPU is more than capable of processing game data at a rate that far exceeds the GPU's ability to render frames. The CPU is not the bottleneck at this resolution, allowing the GPU to be the sole limiting factor.

The CPU's multi-threading capabilities are also substantial. It scores 28,838 points in Cinebench R23 multi-core and 11,211 in Cinebench R20 multi-core. While these numbers are not directly tied to in-game FPS, they indicate a processor that can handle background tasks and complex game simulations without breaking a sweat. For a game like Ready Or Not, which can involve numerous AI-controlled suspects and civilians, this multi-threaded headroom is beneficial, even if it doesn't directly translate to higher frame rates. The data suggests the CPU is never the primary constraint in this configuration, leaving the GPU to dictate the final performance.

FAQ

Q: What is the highest average frame rate this combo achieves at 1080p?

A: The highest average frame rate is 282 FPS, which is achieved with the Low settings preset at 1920x1080.

Q: Can this system maintain a 60 FPS experience at 4K resolution?

A: Yes. At 3840x2160, the system achieves an average of 74 FPS on High settings and 81 FPS on Medium settings, both of which are above the 60 FPS threshold. Even the Ultra preset, at 52 FPS, is close but falls just short.

Q: How does the CPU's single-thread performance compare to its multi-thread performance?

A: The CPU shows strong performance in both areas. It scores 4,071 points in Cinebench R23 single-core and 28,838 points in multi-core. The multi-core score is roughly seven times higher, reflecting its 12-core, 20-thread design.

Q: Is the CPU or the GPU more likely to limit performance at 1440p?

A: The benchmark data suggests the GPU is the limiting factor. The average FPS drops significantly from 1080p to 1440p (e.g., from 224 to 141 FPS on High settings), which is a pattern consistent with GPU-bound scaling.

Q: What is the total memory bandwidth of the GPU?

A: The AMD Radeon RX 7700 features a memory bandwidth of 624.1 GB/s, which is supported by its 16 GB of GDDR6 memory on a 256-bit bus.

Q: Where does this combo rank among all tested configurations for this game?

A: This combo ranks 1336 out of 2947 tested combinations, placing it in the upper half of all results.

GPU Role

The AMD Radeon RX 7700 is the defining component for this system's gaming performance. It is built on the RDNA 3.0 architecture and features 16 GB of GDDR6 memory on a 256-bit bus, delivering a substantial 624.1 GB/s of memory bandwidth. This large memory pool is particularly relevant for a game like Ready Or Not, which renders detailed environments and multiple characters.

The GPU's clock speeds are significant. It has a base clock of 1900 MHz, a game clock of 2041 MHz, and a boost clock of 2459 MHz. The high game clock is the sustained frequency target for typical gaming workloads, and it is this speed, combined with the 2560 shading units, that determines the raw rendering throughput. The GPU's overall compute capability is rated at 25.18 TFLOPS for FP32 operations.

The data shows that this GPU is the primary driver of performance scaling. As resolution increases from 1080p to 4K, the average FPS drops proportionally, which is the expected behavior when the GPU's pixel fill rate and memory bandwidth become the limiting resources. The GPU's percentile ranking of 58th places it in the mid-range of all graphics cards, which aligns with the observed performance. It is a strong contender for 1080p and 1440p gaming, capable of delivering high frame rates, but it hits its limits at 4K with the most demanding settings, where the Ultra preset yields a 52 FPS average.

Settings Recommendations

Based on the measured FPS data, the optimal settings depend entirely on the user's resolution and performance goals.

For 1080p gamers, the Ultra preset is a viable option, delivering an average of 157 FPS. This is well above the threshold for high-refresh-rate monitors and provides the best visual quality. However, for those with 240Hz+ displays, the High preset at 224 FPS or even the Medium preset at 246 FPS would be the better choice to maximize frame rates. The Low preset at 282 FPS offers the absolute highest performance but sacrifices significant visual fidelity.

At 1440p, the High preset is the sweet spot, providing an excellent balance with an average of 141 FPS. This is a great experience for most 144Hz displays. The Ultra preset, at 99 FPS, is also playable and offers the best image quality, making it a good choice for those who prioritize visuals over maximum smoothness. The Medium preset (155 FPS) is a strong alternative for gamers who prefer to keep frame rates as high as possible without dropping to Low settings.

For 4K gaming, the High preset is the recommended starting point, with an average of 74 FPS. This provides a smooth experience on a 60Hz display. The Medium preset, at 81 FPS, offers a slight performance boost and is arguably the best overall experience at this resolution. The Ultra preset, at 52 FPS, is on the edge of playability and is only recommended for gamers who are not sensitive to frame rates and demand the highest visual fidelity. The Low preset, at 93 FPS, is an option for those who wish to push the frame rate higher on a 4K display, but the visual trade-offs are significant. In summary, the data suggests that High settings provide the most consistent and balanced experience across all three resolutions.