Ready Or Not

The AMD Ryzen 7 9800X3D paired with the NVIDIA GeForce RTX 2060 produces a strikingly CPU-favoring performance profile in Ready Or Not. The data shows this combination ranks 1448th out of 1748 tested combos, placing it in the lower third of all configurations. This is a system where the graphics card is the clear limiting factor at higher resolutions, but the processor’s strength becomes apparent at 1080p, where frame rates climb to levels that many modern systems would struggle to match.

Settings Recommendations

The measured FPS rows reveal that the Ultra preset is punishing for this GPU. At 3840x2160, Ultra drops to 38.1 FPS, while at 1920x1080 it manages 113.4 FPS. The jump from High to Ultra is disproportionately expensive: at 1440p, High delivers 101.4 FPS, but Ultra falls to 71.6 FPS—a loss of nearly 30 FPS for what is typically a modest visual gain. The data strongly suggests avoiding Ultra with this combo unless you are targeting 1080p and prioritize image quality over headroom.

High is the sweet spot for this pairing. At 1440p, High produces 101.4 FPS, which is comfortably above the 60 FPS threshold for smooth tactical gameplay. At 1080p, High reaches 161.1 FPS, providing ample refresh-rate headroom for high-Hz monitors. The Medium preset is also viable, offering 115.1 FPS at 1440p and 180.5 FPS at 1080p, but the incremental gain over High is not large enough to justify the visual downgrade. Low is only useful for competitive play or extreme frame rate chasing, where 204.3 FPS at 1080p is the ceiling.

For 4K users, the situation is more constrained. High at 3840x2160 yields 55.4 FPS, which is playable but not ideal for a tactical shooter where reaction time matters. Medium at 4K is 58.3 FPS, a marginal improvement, while Low is 65.7 FPS. None of these hit the 70+ FPS mark that would make 4K feel genuinely fluid. The recommendation is to run High at 1440p or below, accept Medium at 4K if you must use that resolution, and never touch Ultra.

GPU Role

The RTX 2060 is a Turing-architecture card with 6 GB of GDDR6 memory on a 192-bit bus, providing 336.0 GB/s of bandwidth. Its boost clock is 1680 MHz, and it carries 1920 shading units. The benchmark results show it sitting at the 58th percentile among all GPUs, with an average benchmark score of 16074. Its nearest rival, the AMD Radeon RX 7600S, scores 15996, a delta of 0.5 percent—essentially a statistical tie. The AMD Radeon Pro 5600M and Pro 5700 both score 16351, putting them 1.7 percent ahead, while the AMD Radeon Pro W5500 trails at 15786, 1.8 percent behind.

The 6 GB VRAM capacity is the defining constraint for this game. Ready Or Not’s high-detail environments and texture streaming appear to exceed what 6 GB can comfortably hold at 4K Ultra, which explains the catastrophic drop to 38.1 FPS. At 1440p, the card has enough memory bandwidth to keep the 9800X3D fed, but the GPU’s raw compute limits frame rates as resolution increases. The FP32 throughput of 6.451 TFLOPS is modest by modern standards, and the pixel rate of 80.64 GPixel/s struggles to fill 4K screens.

The data indicates that the GPU is the bottleneck at 1440p and 4K. At 1440p High, the combo produces 101.4 FPS, but the CPU is capable of far more, as evidenced by the 1080p results. The RTX 2060’s end-of-life production status and its 58th percentile ranking reinforce that this is a legacy card being asked to handle a modern title. It does so acceptably up to 1440p, but the VRAM and compute limitations become obvious at 4K.

CPU Role

The Ryzen 7 9800X3D is a Zen 5 (Granite Ridge) processor with 8 cores and 16 threads, base clock of 4.70 GHz, and boost clock of 5.20 GHz. It features 96 MB of shared L3 cache, which is the key attribute for gaming. Its benchmark scores are exceptional: Cinebench R23 multicore hits 34004, single-core 4800, and Geekbench multicore 18413. The CPU sits at the 90th percentile among all processors, with an average benchmark score of 37780. Its nearest rival, the Intel Xeon 6353P, scores 37811 (0.1 percent ahead), while the Intel Core Ultra 5 225 scores 37831 (0.1 percent ahead). The Intel Core i9-13900HK and i5-13600KF are 0.6 and 0.7 percent behind, respectively.

In Ready Or Not, the CPU’s role is to feed the GPU with draw calls and physics data. The 9800X3D excels at this, but the RTX 2060 cannot keep up at higher resolutions. The proof is in the 1080p numbers: at Low settings, the combo reaches 204.3 FPS, which is a clear indication that the CPU is not the limiting factor even in a CPU-heavy tactical shooter. The 96 MB L3 cache is particularly beneficial for this genre, where AI-driven NPCs and complex scene geometry create large working sets that fit comfortably in the cache.

The data suggests that the CPU is overkill for this GPU pairing. At 1440p, the GPU is saturated, and the CPU has headroom to spare. This is a lopsided configuration where the processor outperforms its graphics counterpart by a wide margin. The CPU’s 90th percentile ranking versus the GPU’s 58th percentile highlights this imbalance. If the goal is to maximize this system’s potential, the CPU is ready for a GPU upgrade, but as measured, it is doing everything it can to push frame rates upward.

How This Combo Ranks

The combo’s rank of 1448 out of 1748 tested combinations places it in the bottom 17 percent of all systems tested for Ready Or Not. This is a poor overall ranking, but the interpretation is nuanced. The ranking reflects the GPU’s limitations at 4K, where the combo falls to 38.1 FPS on Ultra. At 1080p, however, the system performs like a top-tier rig, with 204.3 FPS on Low and 161.1 FPS on High.

The delta between the CPU’s and GPU’s percentiles—90th versus 58th—explains this discrepancy. The combo ranking is dragged down by the GPU, which is simply not in the same performance class as the processor. Among all combos, this pairing is an outlier: most systems pair high-end CPUs with high-end GPUs. The data shows that the RTX 2060 is holding back the 9800X3D, and the ranking reflects the weakest link in the chain. If the GPU were replaced with a more capable card, the combo’s rank would improve dramatically, as the CPU’s headroom is substantial.

Resolution Scaling

The FPS scaling from 1080p to 4K is severe and reveals the GPU-bound nature of the system at higher resolutions. At High settings, the combo delivers 161.1 FPS at 1080p, 101.4 FPS at 1440p, and 55.4 FPS at 4K. That is a 62.3 percent drop from 1080p to 1440p, and a further 45.4 percent drop from 1440p to 4K. The total drop from 1080p to 4K is 65.6 percent.

This scaling pattern is typical of a GPU-limited scenario. The CPU is capable of far more than 161.1 FPS, as evidenced by the Low preset hitting 204.3 FPS at 1080p. As resolution increases, the GPU’s fill rate and memory bandwidth become the constraining factors. The 4K Ultra result of 38.1 FPS is particularly telling—it is below the 40 FPS threshold that most players would consider playable, indicating that the RTX 2060’s 6 GB VRAM is being overwhelmed.

At 1080p, the system is partially CPU-bound at Low settings, but at High and above, the GPU still manages to keep pace. The fact that 1080p High produces 161.1 FPS while 4K High produces 55.4 FPS shows that the GPU is the primary limiter once resolution climbs. The CPU’s performance is essentially constant across resolutions, but the GPU’s workload increases linearly with pixel count, and this card cannot sustain high frame rates at 4K.

Measured FPS Breakdown

At 1920x1080, the combo delivers its best results. Low settings produce 204.3 FPS, Medium 180.5 FPS, High 161.1 FPS, and Ultra 113.4 FPS. The gap between Low and High is 43.2 FPS, while High to Ultra is a 47.7 FPS drop. This resolution is where the 9800X3D’s strength shines, as the GPU is able to keep up with the CPU’s output.

At 2560x1440, frame rates drop across the board. Low yields 126.3 FPS, Medium 115.1 FPS, High 101.4 FPS, and Ultra 71.6 FPS. The drop from 1080p to 1440p is consistent across presets, averaging around 37 percent. Ultra at 1440p is the first preset where the system dips below 75 FPS, indicating that the GPU is starting to struggle.

At 3840x2160, the system is clearly GPU-limited. Low produces 65.7 FPS, Medium 58.3 FPS, High 55.4 FPS, and Ultra 38.1 FPS. The gap between Low and High is only 10.3 FPS, which is unusual—it suggests that at 4K, the GPU is so saturated that even reducing settings has diminishing returns. The Ultra preset at 38.1 FPS is the only measured result below 50 FPS, and it is 33.3 FPS lower than the same preset at 1440p.

The data shows a consistent pattern: this combo is best used at 1080p, acceptable at 1440p with High or lower settings, and only marginal at 4K with Low or Medium presets. The RTX 2060 is the bottleneck at higher resolutions, while the 9800X3D ensures that frame rates remain high whenever the GPU can keep up.