Ready Or Not

The AMD Ryzen 5 9600X paired with the NVIDIA GeForce RTX 2060 delivers a highly playable experience in Ready Or Not, though the balance of components shifts as resolution increases. At 1080p, the CPU drives frame rates well past 160 FPS on High settings, while at 4K, the GPU becomes the clear limiting factor. This analysis breaks down the measured data for this specific configuration, focusing on how the hardware handles the tactical shooter’s demands.

FAQ

Q: What is the average frame rate at 1080p with High settings?

A: The measured average frame rate is 163.8 FPS. This indicates the configuration is well-suited for high-refresh-rate monitors at this resolution.

Q: How does the frame rate drop from 1080p to 4K on High settings?

A: The average frame rate falls from 163.8 FPS at 1920x1080 to 105 FPS at 2560x1440, and finally to 54.2 FPS at 3840x2160. This represents a significant reduction of approximately 67% from 1080p to 4K.

Q: What is the performance difference between Low and Ultra settings at 1440p?

A: At 2560x1440, the Low preset achieves an average of 130.8 FPS, while the Ultra preset drops to 73.1 FPS. The difference between these two extremes is 57.7 FPS.

Q: Which component is the bottleneck at 4K resolution?

A: The data suggests the GPU is the primary limiting factor at 4K. The frame rate drops heavily with increased resolution, and the RTX 2060’s performance percentile (58) is lower than the CPU’s (85), indicating it is the weaker component for this workload.

Q: Is the CPU capable of keeping up with the GPU at lower resolutions?

A: Yes. At 1080p, the average frame rates are exceptionally high (e.g., 175.9 FPS on Medium), suggesting the Ryzen 5 9600X provides ample headroom for the RTX 2060 to operate near its maximum potential.

Q: How does this combo rank against all other tested configurations?

A: The combo ranks 1429 out of 1748 total tested combinations. This places it in the lower-mid tier of all tested systems, despite delivering good frame rates in this specific game.

CPU Role

The AMD Ryzen 5 9600X is a 6-core, 12-thread processor built on the Zen 5 architecture. Its base clock is 3.90 GHz with a boost clock of 5.40 GHz, and it features a 32 MB shared L3 cache. In Ready Or Not, a tactical shooter that often involves complex AI routines and physics calculations, these specifications are relevant for maintaining high frame rates.

Benchmark results for the CPU show strong single-threaded performance, with a Geekbench single-core score of 3363 and a Cinebench R23 single-core score of 3603. This is critical for game logic and frame pacing. The multi-threaded performance is also solid, as evidenced by a Cinebench R23 multi-core score of 25525 and a Geekbench multi-core score of 15182. The data shows that at 1080p, the configuration achieves an average of 202.5 FPS on Low settings, which points to the CPU’s ability to feed the GPU efficiently at lower resolutions where graphical load is minimal.

Comparing the CPU to its nearest rivals, it sits just 0.3% above the Intel Core i5-13490F and the AMD Ryzen 5 230. It is 0.4% below the AMD Ryzen 7 8845HS and 0.5% below the Intel Core i5-14500T. This indicates that the 9600X is in a very competitive performance tier, with negligible differences in average benchmark scores. The CPU’s 85th percentile ranking among all CPUs further confirms that it is a high-performing part, leaving the GPU as the more likely bottleneck in this pairing.

GPU Role

The NVIDIA GeForce RTX 2060 is based on the Turing architecture and features 1920 shading units, 30 RT cores, and 240 tensor cores. It has 6 GB of GDDR6 memory on a 192-bit bus, providing a bandwidth of 336.0 GB/s. Its base clock is 1365 MHz with a boost clock of 1680 MHz. In Ready Or Not, which features detailed environments and lighting, the GPU’s role becomes more prominent as resolution and graphical fidelity increase.

The benchmark data shows a clear pattern: frame rates are heavily dependent on the GPU at higher resolutions. At 4K Ultra, the average frame rate falls to 38.6 FPS, which is barely playable. At 4K Low, the average is 68 FPS. This significant drop from 1080p Low (202.5 FPS) to 4K Low (68 FPS) demonstrates the GPU’s struggle with the pixel count. The RTX 2060’s performance percentile is 58, and its average benchmark score is 16074. It is 0.5% ahead of the AMD Radeon RX 7600S and 1.8% ahead of the AMD Radeon Pro W5500, but 1.7% behind both the AMD Radeon Pro 5600M and the AMD Radeon Pro 5700.

The 6 GB of VRAM is a key specification. While the data does not include VRAM usage, the frame rate drops at Ultra settings suggest that the memory capacity and bandwidth are being stressed, leading to lower performance at 4K. The GPU’s role is clearly the limiting factor at 1440p and 4K, where the CPU’s strong performance cannot compensate for the GPU’s inability to render frames fast enough.

How This Combo Ranks

The combination of the Ryzen 5 9600X and RTX 2060 ranks 1429 out of 1748 tested combos for Ready Or Not. This places it in the lower 18th percentile of all tested systems. This ranking may seem low given the high frame rates observed, but it reflects the performance of this specific pairing against all other combinations, which include much more powerful and recent hardware.

This ranking is context-dependent. The combo’s performance is strong for the hardware involved, but it is outclassed by systems with higher-end GPUs and CPUs. The rank indicates that while this pairing is capable of excellent frame rates in this game, especially at 1080p, it does not compete with top-tier configurations. The data suggests that the RTX 2060 is the limiting factor in this pairing, as the CPU is a high-performer relative to other processors. Users should interpret this ranking as a measure of overall system capability rather than a reflection of playability, as the measured FPS numbers show the game is highly playable at most settings.

Resolution Scaling

The measured FPS data reveals distinct scaling patterns across resolutions. At 1080p, the configuration is clearly CPU-bound or balanced, as the frame rates are exceptionally high. The average FPS on High is 163.8, and on Low it reaches 202.5. The difference between Low and Ultra at 1080p is 91 FPS (from 202.5 to 111.5). This shows that while the GPU is still a factor, the CPU is capable of pushing high frame rates.

Moving to 1440p, the frame rates drop, but remain very playable. The High preset yields 105 FPS, while Ultra yields 73.1 FPS. The scaling from 1080p to 1440p on High settings results in a 36% decrease in frame rate (from 163.8 to 105). This indicates that the GPU is beginning to become a more significant bottleneck.

At 4K, the GPU bottleneck becomes severe. The High preset average FPS is 54.2, which is a 67% drop from 1080p High. The Ultra preset drops to 38.6 FPS. The scaling from 1440p to 4K on High settings is a 48% decrease (from 105 to 54.2). This data strongly suggests that the RTX 2060’s 6 GB of VRAM and compute capabilities are insufficient to maintain high frame rates at 4K. The limiting component at this resolution is definitively the GPU, as the CPU’s performance headroom cannot be fully utilized.