Pc Building Simulator

# Pc Building Simulator: Intel Core i7-13700K + NVIDIA GeForce RTX 4070 Ti

The Intel Core i7-13700K paired with the NVIDIA GeForce RTX 4070 Ti delivers a frame-rate profile in Pc Building Simulator that is heavily dependent on resolution and preset selection, with the data showing a clear transition from CPU-bound behavior at 1080p to GPU-bound behavior at 4K. Across all twelve measured configurations, this combo ranks 161st out of 1,769 tested combinations, placing it in the top 9.1% of all systems evaluated for this title. The CPU's 93rd percentile standing among all processors and the GPU's 85th percentile among all graphics cards suggest a balanced pairing, though the measured FPS data reveals that the RTX 4070 Ti becomes the limiting factor at higher resolutions while the i7-13700K's 16 cores and 24 threads provide ample headroom at lower settings.

Resolution Scaling

The frame-rate drop from 1080p to 4K is steep but consistent with a simulation title that places moderate demands on the graphics pipeline. At Low settings, the average FPS falls from 428.8 at 1080p to 274.4 at 1440p and further to 139.7 at 4K, representing a 67.4% reduction from 1080p to 4K. This scaling pattern indicates that even at the lowest preset, the RTX 4070 Ti's rendering workload scales predictably with pixel count, while the CPU maintains sufficient throughput to avoid becoming a bottleneck.

At Ultra settings, the same resolution progression shows 204 FPS at 1080p, 129.8 FPS at 1440p, and 70.5 FPS at 4K — a 65.4% drop from 1080p to 4K. The similarity in percentage reduction across Low and Ultra presets suggests that resolution, rather than settings complexity, dominates the performance curve. However, the gap between Low and Ultra at 1080p (428.8 vs 204 FPS) is larger than the corresponding gap at 4K (139.7 vs 70.5 FPS), indicating that the GPU has more spare capacity at lower resolutions where the CPU can push frame rates higher before hitting the graphics card's ceiling.

The 1440p results sit roughly midway between the extremes, with High settings producing 137.6 FPS and Ultra producing 129.8 FPS. This narrow spread at 1440p suggests the system is approaching a balance point where neither component is fully saturated, making it the most efficient resolution for this combo in terms of consistency across presets.

FAQ

Q: How does this combo rank among all tested systems in Pc Building Simulator?

A: The Intel Core i7-13700K + RTX 4070 Ti combination ranks 161st out of 1,769 tested combos, placing it in the top 9.1% of all systems benchmarked for this game.

Q: What is the highest average FPS achievable with this setup?

A: The highest measured average FPS is 428.8, achieved at 1920x1080 resolution with Low settings. The next highest is 305 FPS at 1080p Medium, followed by 274.4 FPS at 1440p Low.

Q: Is the RTX 4070 Ti sufficient for 4K gaming in this title?

A: At 4K Ultra, the combo produces 70.5 FPS average, which is playable but not high-refresh territory. Dropping to 4K High yields 73.1 FPS, while 4K Medium reaches 101.1 FPS. For 4K Low, the system delivers 139.7 FPS, so the GPU can handle 4K if settings are adjusted.

Q: How does the i7-13700K compare to its closest CPU rivals?

A: The i7-13700K has an average benchmark score of 47,282, which is 0.1% lower than the Intel Core i7-13700KF (47,334) and 0.3% higher than the AMD EPYC 4364P (47,131). It also outperforms the Intel Core i9-12900F (47,081) by 0.4% and trails the AMD Ryzen 9 PRO 5945 (47,527) by 0.5%.

Q: What is the GPU's benchmark standing relative to its nearest competitors?

A: The RTX 4070 Ti's average benchmark score is 44,900, placing it 0.6% behind the NVIDIA GeForce RTX 5090 Mobile (45,152) and 1.5% behind the Intel Arc A730M (45,592). It leads the AMD Radeon Pro 580 (44,195) by 1.6% and trails the AMD Radeon Pro 5500 XT (45,642) by 1.6%.

Q: Does the CPU or GPU limit performance more in this game?

A: At 1080p Low, the system reaches 428.8 FPS, indicating CPU headroom is the primary constraint. At 4K Ultra, the frame rate drops to 70.5 FPS, showing the GPU becomes the limiting factor. The transition occurs between 1440p and 4K, where the GPU's workload scales beyond the CPU's ability to feed frames.

How This Combo Ranks

The 161st rank out of 1,769 combos positions this system in the 91st percentile of all tested configurations for Pc Building Simulator. This is a strong showing that reflects the balanced nature of the i7-13700K and RTX 4070 Ti pairing. The CPU's 93rd percentile ranking among all processors (with an average benchmark score of 47,282) and the GPU's 85th percentile ranking (with an average score of 44,900) are both high, but the combo rank suggests the pairing extracts nearly the full potential from both components.

In CPU-bound scenarios at 1080p, the i7-13700K's 3DMark max-thread score of 12,412 and Cinebench R23 multi-core score of 39,000 indicate substantial processing power that keeps frame rates high even at Low settings. The single-thread performance, reflected in a 3DMark single-thread score of 1,136 and Geekbench single-core score of 2,850, is sufficient for the simulation's game logic. The GPU's PassMark G3D score of 31,624 and 3DMark Steel Nomad DX12 score of 5,024 demonstrate that the RTX 4070 Ti is also a capable performer, though its role becomes more prominent as resolution increases.

Compared to other combos in the database, this system sits comfortably in the upper tier. The rank of 161 means only 160 combinations out of 1,769 deliver higher average FPS across all measured settings, putting it ahead of roughly 91% of all tested systems.

Measured FPS Breakdown

At 1920x1080, the system delivers its highest frame rates across all presets. Low settings produce 428.8 FPS average, Medium reaches 305 FPS, High achieves 217.1 FPS, and Ultra drops to 204 FPS. The spread from Low to Ultra is 224.8 FPS, indicating that the CPU is capable of pushing very high frame rates when the GPU workload is light, but the settings-dependent workload still creates meaningful differences.

At 2560x1440, the frame rates remain high but show a tighter grouping. Low produces 274.4 FPS, Medium hits 193.1 FPS, High delivers 137.6 FPS, and Ultra reaches 129.8 FPS. The Low-to-Ultra spread narrows to 144.6 FPS, showing that the GPU begins to assert more influence as pixel count increases. The difference between High and Ultra at 1440p is only 7.8 FPS, suggesting diminishing returns from the highest preset.

At 3840x2160, the system's frame rates drop below high-refresh thresholds for demanding presets. Low yields 139.7 FPS, Medium produces 101.1 FPS, High reaches 73.1 FPS, and Ultra falls to 70.5 FPS. The Low-to-Ultra spread narrows further to 69.2 FPS, confirming that the GPU is the dominant constraint at 4K. The gap between High and Ultra at 4K is just 2.6 FPS, indicating that the Ultra preset offers minimal visual benefit relative to its performance cost at this resolution.

GPU Role

The RTX 4070 Ti's 12 GB of GDDR6X memory on a 192-bit bus provides 504.2 GB/s of bandwidth, which is sufficient for Pc Building Simulator's asset streaming at all tested resolutions. The GPU's base clock of 2310 MHz and boost clock of 2610 MHz, combined with its 7,680 shading units and 240 texture mapping units, deliver strong raw compute throughput. The 80 ROPs and 208.8 GPixel/s pixel rate contribute to the frame-rate scaling observed across resolutions.

The GPU's Ada Lovelace architecture, built on a 5 nm TSMC process with 35,800 million transistors, supports DirectX 12 Ultimate and Vulkan 1.4, both of which are utilized by this simulation title. The 60 RT cores and 240 tensor cores provide additional capabilities that are not heavily exercised in Pc Building Simulator, which is primarily a CPU-driven simulation with moderate graphics demands.

The PassMark results show the GPU achieves a G3D score of 31,624 and a compute score of 18,396, with DirectX 12 scoring 116 and DirectX 11 scoring 288. These figures indicate strong general-purpose graphics performance but also show that the GPU's advantage over its nearest rivals is narrow — the RTX 5090 Mobile leads by 0.6% and the Intel Arc A730M leads by 1.5% in average benchmark score. In practice, the RTX 4070 Ti's performance in this game is more than adequate for 1440p gaming at high refresh rates, while 4K requires preset adjustments to maintain smooth frame rates.

Settings Recommendations

For 1080p gaming, the data shows that Ultra settings at 204 FPS average provide an excellent experience with no need to compromise visual quality. The jump from High (217.1 FPS) to Ultra (204 FPS) costs only 13.1 FPS, making Ultra the clear choice at this resolution. Even Medium at 305 FPS offers headroom for high-refresh displays, but the visual fidelity gain from Ultra outweighs the frame rate loss.

At 1440p, Ultra settings produce 129.8 FPS, which is still above standard 120 Hz refresh rates and represents the best balance. High settings at 137.6 FPS offer a marginal 7.8 FPS improvement, but the visual difference is likely negligible for a simulation title. The recommendation is to run Ultra at 1440p for the best image quality without sacrificing smoothness.

At 4K, the choice depends on display refresh rate. For 60 Hz displays, Ultra at 70.5 FPS is acceptable, though High at 73.1 FPS provides a slight improvement. For 120 Hz displays, Medium at 101.1 FPS is the optimal preset, as it stays above 100 FPS while maintaining moderate visual quality. Low at 139.7 FPS is available for competitive play or maximum frame rate, but the visual trade-off is substantial.

Overall, the sweet spot for this combo is 1440p Ultra, which delivers 129.8 FPS with full visual settings. At 1080p, the system is CPU-limited and can handle Ultra with ease. At 4K, users should target Medium or High to keep frame rates above 70 FPS, accepting that Ultra will drop below high-refresh thresholds.