Pc Building Simulator

Pc Building Simulator

AVERAGE FPS
69
good

This combination provides smooth gameplay with an average of 69 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 24 28 40 51
1440p QHD 49 52 70 103
1080p Full HD 74 77 110 157

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 51
3840x2160 Medium 40
3840x2160 High 28
3840x2160 Ultra 24
2560x1440 Low 103
2560x1440 Medium 70
2560x1440 High 52
2560x1440 Ultra 49
1920x1080 Low 157
1920x1080 Medium 110
1920x1080 High 77
1920x1080 Ultra 74

Pc Building Simulator with Intel Core i5-11400F + NVIDIA GeForce RTX 3050 4 GB, In-Depth Analysis

Pc Building Simulator presents a unique benchmarking scenario where the interaction between the CPU and GPU is complex, and the data reveals a system that is highly configurable but requires careful settings management to achieve a smooth experience. The measured FPS figures across various resolutions and presets show a wide performance envelope, from a very playable 156.8 FPS at 1080p Low to a slideshow-like 23.5 FPS at 4K Ultra. This range suggests that the combination of the Intel Core i5-11400F and the NVIDIA GeForce RTX 3050 4 GB is capable, but its performance ceiling and floor are defined more by the graphics card's 4 GB VRAM and the simulation's demands than by the processor's capabilities.

Settings Recommendations

The benchmark data for this combination points to a clear hierarchy of playable settings. At 1920x1080, the most balanced experience is found at the Medium preset, which delivers 109.6 FPS. This is a substantial leap from the 77.1 FPS at High, indicating that the step from Medium to High incurs a significant performance cost that may not be justifiable. While the Low preset achieves 156.8 FPS, it likely does so by sacrificing visual fidelity in a game where visual feedback on component assembly is part of the appeal. The Ultra preset at 1080p, at 74.1 FPS, is still technically playable but offers diminishing returns over High.

For users with 2560x1440 displays, the analysis changes. The Medium preset drops to 70.1 FPS, which is on the edge of what many consider smooth for a simulation title. The High preset at 51.7 FPS is more demanding, and the Ultra preset falls to 49.2 FPS. The data suggests that 1440p Medium is the optimal target for this combo, as it maintains a frame rate above 60 FPS. Pushing to High or Ultra at this resolution will result in a noticeably less fluid experience, which is counterproductive in a game where precise mouse control is often necessary for placing components.

At 3840x2160, the data paints a grim picture for high-fidelity gaming. The best result is 50.8 FPS at the Low preset, which is playable but far from ideal. The Medium preset at 40.1 FPS and High at 27.5 FPS are not recommended for a responsive experience. The Ultra preset, at 23.5 FPS, is essentially unplayable. The conclusion is straightforward: this hardware combination is not suited for 4K gaming with this title unless the user is willing to accept the visual compromises of the Low preset. The most sensible recommendation for the best overall experience is to use the Medium preset at 1080p, offering the best balance of visual quality and performance headroom.

How This Combo Ranks

The data places this specific configuration at rank 1602 out of 1769 tested combos for Pc Building Simulator. This is a low ranking, placing it in the bottom 10% of all tested systems. This percentile position is a strong indicator that while the i5-11400F and RTX 3050 can run the game, they are far from optimal. The rank of 1602 suggests that a significant majority of other hardware pairings deliver higher average frame rates. This is not surprising given the GPU's 4 GB VRAM, which is a limiting factor in a simulation that may load many assets.

This low rank does not mean the experience is broken, but it contextualizes the measured FPS. The system is clearly not a high-end performer in this specific title. The data implies that users with this combo should have modest expectations. The fact that it ranks so low despite being able to hit 156.8 FPS at 1080p Low suggests that other combos achieve even higher frame rates at higher settings, or that the overall average across all settings is lower due to the 4K results. The rank serves as a warning that this is a baseline configuration for the game, not a performance-oriented one.

GPU Role

The NVIDIA GeForce RTX 3050 4 GB is the definitive bottleneck in this configuration. Its most glaring limitation is the 4 GB VRAM capacity. In a game like Pc Building Simulator, where the player can have multiple high-resolution textures and 3D models on screen, this capacity can be quickly exhausted. The benchmark results support this hypothesis. The massive drop in FPS from 1080p Medium (109.6 FPS) to 1080p Ultra (74.1 FPS) is a 32% reduction in performance for what should be a manageable resolution. This suggests that the Ultra preset is likely exceeding the VRAM buffer, forcing the system to use slower memory paging.

The GPU's clock speeds, with a base of 1545 MHz and a boost of 1740 MHz, are standard for the Ampere architecture. The 192.0 GB/s memory bandwidth is a moderate figure, and it appears insufficient to sustain high frame rates at higher resolutions when combined with the 4 GB frame buffer. The data shows that the GPU is the primary driver of performance differences. For example, at 1440p, the FPS drops from 103.2 on Low to 49.2 on Ultra, a 52% reduction. This scaling indicates that the GPU is overwhelmed by the increased pixel count and texture detail, not the CPU. The RTX 3050 has 2048 shading units and 16 RT cores, but these are not being utilized to their potential in this title, which seems to be more memory-bandwidth and capacity-bound.

Measured FPS Breakdown

The measured data provides a clear picture of the performance scaling. At 1920x1080, the progression is: Low 156.8 FPS, Medium 109.6 FPS, High 77.1 FPS, and Ultra 74.1 FPS. The most significant single-step drop is from Medium to High, which is a 32.5 FPS reduction. This is a steep penalty, suggesting the High preset introduces a substantial graphical load. The gap between High and Ultra is small at just 3 FPS, which is unusual and indicates that the High preset is already hitting the VRAM ceiling, making the Ultra preset's additional features negligible in cost.

Moving to 2560x1440, the numbers are: Low 103.2 FPS, Medium 70.1 FPS, High 51.7 FPS, and Ultra 49.2 FPS. The scaling pattern is similar to 1080p, but the frame rates are lower across the board. The drop from Medium to High is 18.4 FPS, which represents a 26% performance decrease. At this resolution, even the Low preset is just barely above the 100 FPS mark, indicating that the GPU's pixel throughput is becoming a limiting factor.

At 3840x2160, the results are: Low 50.8 FPS, Medium 40.1 FPS, High 27.5 FPS, and Ultra 23.5 FPS. This resolution is clearly beyond the intended performance envelope of this GPU. The drop from Low to Medium is 10.7 FPS, and from Medium to High is 12.6 FPS. The framerate at High and Ultra falls well below the 30 FPS threshold, making these presets impractical for regular use. The data shows that the RTX 3050 can only handle 4K at its absolute lowest settings.

FAQ

Q: Can this system run Pc Building Simulator at 1080p?

A: Yes, it can. The measured average FPS at 1920x1080 ranges from 74.1 FPS at Ultra settings to 156.8 FPS at Low settings, indicating that all presets are playable at this resolution.

Q: Is the RTX 3050 4 GB sufficient for 1440p gaming in this title?

A: It is marginal. The data shows 70.1 FPS at Medium settings and 103.2 FPS at Low settings. However, High and Ultra settings drop to 51.7 FPS and 49.2 FPS, respectively, which may not be smooth enough for all users.

Q: What is the best resolution for a consistently smooth experience?

A: Based on the data, 1920x1080 with Medium settings, which yields 109.6 FPS, is the most reliable way to maintain a high and stable frame rate without significant visual compromises.

Q: Why is the performance at Ultra settings so poor compared to High?

A: The data shows a small difference between High and Ultra at 1080p (3.0 FPS) and 1440p (2.5 FPS), but a large difference between Medium and High. This suggests the 4 GB VRAM is saturated, and Ultra settings do not provide additional headroom.

Q: Is the CPU or the GPU the limiting factor here?

A: The GPU is the clear bottleneck. The FPS scales dramatically with resolution and settings, which is a GPU-bound characteristic. The CPU's 6 cores and 12 threads are sufficient, as the performance drops are directly tied to the graphics load.

Q: Can this combination handle 4K resolution?

A: Only with significant compromises. The maximum playable frame rate at 3840x2160 is 50.8 FPS, which is only achieved at Low settings. Higher presets result in frame rates below 40 FPS, which is not a recommended experience.

CPU Role

The Intel Core i5-11400F is a 6-core, 12-thread processor from the Rocket Lake architecture. Its performance in synthetic benchmarks, such as a Cinebench R23 multicore score of 14372, indicates it has ample compute power for a simulation game. The single-core performance, with a Geekbench single-core score of 1979, is also robust. In Pc Building Simulator, the CPU's role is to manage the game's logic, physics calculations, and the state of all the components, but the benchmark data suggests it is not the primary constraint.

The evidence for this is the FPS scaling. When resolution is increased from 1080p to 4K, the frame rate drops significantly across all settings (e.g., from 109.6 to 40.1 FPS at Medium). If the CPU were the bottleneck, we would expect the frame rates to remain relatively consistent across resolutions, as the CPU workload would be similar. Instead, the sharp decline indicates a GPU bottleneck. The CPU's 12 MB of shared L3 cache and 51.2 GB/s memory bandwidth are sufficient for this task. The processor never appears to be the limiting factor, as the GPU's inability to render frames quickly enough is what prevents higher FPS at higher settings.

Resolution Scaling

The FPS scaling across resolutions reveals a classic GPU-bound scenario. Starting with the Medium preset as a reference, the frame rate drops from 109.6 FPS at 1080p to 70.1 FPS at 1440p, a 36% decrease. This is a larger drop than the pixel count increase would suggest (a 78% increase in pixels), which indicates that the GPU is not purely pixel-bound; memory bandwidth and capacity are also playing a role. Moving from 1440p to 4K, the frame rate drops from 70.1 FPS to 40.1 FPS, a further 43% decrease. This confirms that the GPU is struggling to keep up with the increasing demand.

The scaling is not linear, and the data shows that the gap between resolutions widens at higher settings. For example, at Low settings, the drop from 1080p (156.8 FPS) to 4K (50.8 FPS) is a 68% reduction. At Ultra settings, the drop from 1080p (74.1 FPS) to 4K (23.5 FPS) is a 68% reduction as well. This consistent percentage drop indicates that the GPU's memory subsystem is the limiting factor, as the relative performance penalty is the same regardless of the starting point. The analysis shows that the RTX 3050's 192.0 GB/s bandwidth is insufficient to feed the processor at higher resolutions, and the 4 GB VRAM capacity becomes a hard limit that prevents the Ultra preset from being viable at any resolution above 1080p.

Hardware Specifications

Intel Core i5-11400F

Cores / Threads 6 / 12
Base Clock 2600 MHz
Boost Clock 4400 MHz
TDP 65W
Socket Intel Socket 1200
View Full CPU Details →

NVIDIA GeForce RTX 3050 4 GB

VRAM 4 GB GDDR6
Base Clock —
Boost Clock 1740 MHz MHz
TDP 90 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core i5-11400F + NVIDIA GeForce RTX 3050 4 GB in Pc Building Simulator

Resolution Settings Avg FPS
3840x2160 Low 50.8
3840x2160 Medium 40.1
3840x2160 High 27.5
3840x2160 Ultra 23.5
2560x1440 Low 103.2
2560x1440 Medium 70.1
2560x1440 High 51.7
2560x1440 Ultra 49.2
1920x1080 Low 156.8
1920x1080 Medium 109.6
1920x1080 High 77.1
1920x1080 Ultra 74.1

Pc Building Simulator with RTX 3050 4 GB + Other CPUs

See how Pc Building Simulator performs with the same GPU but different processors.

Other Games with ii5-11400F + RTX 3050 4 GB

Explore FPS benchmarks for other games using this same hardware combination.