Pc Building Simulator

Pc Building Simulator, a simulation title that tasks players with assembling and troubleshooting virtual PCs, presents a unique workload where frame pacing and overall smoothness matter more than raw visual spectacle. The benchmark data for the Intel Core i5-10400F and NVIDIA GeForce RTX 2060 SUPER combination reveals a system that is exceptionally well-balanced for this specific genre, delivering high frame rates across most settings and resolutions. The analysis of the measured FPS rows indicates that this pairing is capable of providing a fluid experience on high-refresh-rate monitors at mainstream resolutions, while also maintaining playability at 4K with adjusted settings. This combination’s performance is defined less by extremes and more by its consistent ability to keep frame rates high, making it a dependable choice for a game that is fundamentally about system interaction.

Resolution Scaling

The progression from 1920x1080 to 3840x2160 shows a clear and predictable impact on performance, with the graphics card becoming the primary limiting factor as pixel count increases. At the "Low" preset, the system achieves 222.4 FPS at 1080p, which drops to 143.2 FPS at 1440p, and finally to 76.3 FPS at 4K. This scaling pattern indicates that even at the lowest graphical settings, the GPU is still doing significant work, as the frame rate does not stay flat across resolutions. The drop from 1440p to 4K represents a reduction of roughly 47%, which is a substantial hit that points directly to the GPU’s rendering capabilities being tested by the four-fold increase in pixel count from 1080p.

The trend becomes more pronounced at higher graphical presets. With the "Ultra" preset, the system produces 105.1 FPS at 1080p, 65 FPS at 1440p, and 36 FPS at 4K. This steeper decline from 1080p to 4K, a 66% reduction, suggests that the increased demand for shading, textures, and other visual effects is putting additional strain on the GPU. While the CPU, with its 6 cores and 12 threads, is certainly capable of handling the simulation's logical workload, the data strongly suggests that the RTX 2060 SUPER is the component that dictates the performance ceiling from 1440p upwards. At 1080p with low settings, the frame rate of 222.4 FPS may approach a range where the CPU's single-thread performance could begin to have more influence, but the overall pattern is one of a GPU-bound scenario at higher resolutions.

Settings Recommendations

For users with a high-refresh-rate 1080p monitor, the data shows that the "High" preset, delivering 109.8 FPS, is the optimal choice for balancing visual fidelity with a fluid experience. The "Ultra" preset at 105.1 FPS is nearly as fast, but the difference is marginal, suggesting that the added visual complexity of "Ultra" might not be worth the small performance trade-off. The "Low" preset at 222.4 FPS is exceptionally fast, but such a high frame rate is unnecessary for a simulation game, and the visual quality reduction would be counterproductive to the game’s detail-oriented nature. For a smooth and detailed experience, "High" at 1080p is the clear recommendation.

Moving to 1440p, the "High" preset again stands out, producing 74.2 FPS. This is comfortably above the 60 FPS threshold for smooth gameplay. The "Medium" preset is also a strong option at 97.8 FPS, providing extra headroom for those who prioritize high refresh rates. "Ultra" at 65 FPS is playable but sits closer to the edge, and any minor fluctuation could drop it below 60 FPS. At 4K, the situation changes entirely. The "Low" preset at 76.3 FPS is the only setting that provides a truly smooth experience. The "Medium" preset at 53.4 FPS is acceptable for a slower-paced simulation, but "High" at 35.2 FPS and "Ultra" at 36 FPS fall below the threshold for comfortable play and are best avoided.

FAQ

Q: What is the highest average frame rate this combo can achieve in Pc Building Simulator?

A: The highest measured average frame rate is 222.4 FPS, which is achieved at 1920x1080 resolution with the "Low" settings preset.

Q: Can this system run the game at 4K smoothly?

A: At 4K, smooth performance is only achievable on the "Low" preset, which produces an average of 76.3 FPS. The "Medium" preset at 53.4 FPS is playable, but the "High" and "Ultra" presets, at 35.2 FPS and 36 FPS respectively, are not recommended for a fluid experience.

Q: How does the "Ultra" preset compare to "High" at 1080p?

A: The performance difference is very small. The "Ultra" preset produces 105.1 FPS, while the "High" preset produces 109.8 FPS. This is a difference of only 4.3%, making "High" a more efficient choice for nearly identical visual quality.

Q: Which component is the performance bottleneck at 1440p and 4K?

A: The benchmark results indicate that the NVIDIA GeForce RTX 2060 SUPER is the limiting factor. The frame rate drops significantly with each resolution increase, showing that the GPU’s pixel processing capabilities are the primary constraint at these higher resolutions.

Q: Is the RTX 2060 SUPER's 8 GB of VRAM sufficient for this game?

A: Yes, the 8 GB of GDDR6 memory is fully adequate. The measured frame rates do not indicate any performance anomalies that would suggest a memory capacity limitation, even at 4K resolution with the "Ultra" preset.

Q: What is a good target for a 144Hz monitor at 1440p?

A: The "Low" preset is the only one that reaches the 144 Hz target, with an average of 143.2 FPS. To maintain high visual quality, the "Medium" preset at 97.8 FPS or "High" at 74.2 FPS are more realistic options, which are still well-suited for a 75Hz or 100Hz monitor.

How This Combo Ranks

In the database of tested combinations for Pc Building Simulator, the Intel Core i5-10400F and NVIDIA GeForce RTX 2060 SUPER pairing has a rank of 1291 out of 1769 total combos. This places it in the 73rd percentile of all tested systems, meaning it outperforms roughly 73% of the other CPU and GPU pairings in this specific game. This is a strong showing, especially considering that this is a simulation title that can be more dependent on CPU logic than other genres. The ranking suggests that while this isn't a top-tier, flagship configuration, it offers a level of performance that puts it firmly above the middle of the pack, competing with systems that feature more modern or higher-end components.

The rank is a holistic measure of the combo's ability to handle the game's demands. Given that the system can achieve over 100 FPS on "High" settings at 1080p and maintains playable frame rates at 1440p, its high percentile ranking is logical. The data shows that this combo handles the game’s rendering load with significant headroom, which is likely why it ranks where it does. It is a configuration that provides a high degree of flexibility to the user, allowing them to choose between high resolutions or high frame rates without making major sacrifices, a trait that is well-reflected in its position above most other tested systems.

GPU Role

The NVIDIA GeForce RTX 2060 SUPER plays the central role in determining the visual performance of this combo. Its Turing architecture, built on a 12 nm process at TSMC, features 2176 shading units and 64 ROPs. These specifications directly handle the pixel and texture processing that becomes more demanding as resolution increases. The GPU is equipped with 8 GB of GDDR6 memory on a 256-bit bus, providing a bandwidth of 448.0 GB/s. This memory configuration is more than adequate for Pc Building Simulator, as the game’s assets are not exceedingly complex, allowing the system to avoid any potential memory bottlenecks.

The clock speeds of 1470 MHz base and 1650 MHz boost are relatively modest, but the GPU compensates with its sheer number of processing cores. The benchmark results show a clear correlation between the GPU's workload and the measured FPS. The 7.181 TFLOPS of FP32 compute power is sufficient to render the game's scenes at high frame rates up to 1440p. The presence of 34 RT cores and 272 tensor cores is a feature of the architecture, but they appear to have minimal impact on this particular title. The GPU's performance is the deciding factor in the resolution scaling, with its capabilities being the reason the system is GPU-bound at 4K, where the frame rate drops to 36 FPS on the "Ultra" preset. The data confirms that this is a well-rounded GPU whose 8 GB frame buffer and 256-bit memory interface are not limiting factors in this game.

Measured FPS Breakdown

At 1920x1080, the system shows exceptional performance across all presets. The "Low" preset yields an average of 222.4 FPS, which is the highest value recorded for this combo. "Medium" produces 160.9 FPS, "High" produces 109.8 FPS, and "Ultra" produces 105.1 FPS. The scaling from "Low" to "Ultra" shows a total performance cost of 117.3 FPS, but even the most demanding preset remains well above the 100 FPS threshold.

At 2560x1440, the system continues to perform strongly. The "Low" preset achieves 143.2 FPS, which is still excellent for high-refresh-rate gaming. "Medium" produces 97.8 FPS, and "High" produces 74.2 FPS. The "Ultra" preset sees a more significant drop, coming in at 65 FPS. This resolution shows a wider gap between the presets, indicating the GPU is starting to work harder.

At 3840x2160, the performance scaling is more severe. The "Low" preset is the only one that remains fully fluid, with an average of 76.3 FPS. "Medium" drops to 53.4 FPS, which is still playable for a slower-paced simulation. The "High" and "Ultra" presets, however, fall below the 60 FPS target, with averages of 35.2 FPS and 36 FPS, respectively. The data shows a clear drop-off at this resolution, emphasizing that 4K requires a significant reduction in graphical settings to maintain smooth performance.