Pc Building Simulator

# Pc Building Simulator — AMD Ryzen 7 9700X + NVIDIA GeForce RTX 5090 D

This combination of an 8-core AMD Ryzen 7 9700X and the NVIDIA GeForce RTX 5090 D delivers exceptional performance in Pc Building Simulator, ranking 9th out of 3,002 tested combos. The measured frame rates across resolutions and settings reveal a system that is overwhelmingly GPU-limited at higher presets, while the CPU's strong single-thread performance becomes increasingly relevant as resolution drops. The data shows a simulation title that scales predictably with both components, producing playable frame rates at every tested configuration, with the Ultra preset remaining above 89 FPS even at 4K.

Resolution Scaling

The frame rate progression from 1080p to 4K demonstrates how this combo responds to pixel-count increases. At High settings, the average FPS drops from 284 at 1920x1080 to 179 at 2560x1440, then to 94 at 3840x2160. This represents a 37% reduction from 1080p to 1440p, and a further 47% reduction from 1440p to 4K. The scaling pattern suggests that the RTX 5090 D's immense compute resources are being progressively saturated as resolution increases, yet even at 4K High, the system maintains nearly 100 FPS.

Low settings show even steeper scaling. At 1080p Low, the system produces 468 FPS, dropping to 358 FPS at 1440p (a 24% reduction), and then to 187 FPS at 4K (a 48% reduction from 1440p). The 1080p Low result of 468 FPS indicates that the CPU is the limiting factor at this configuration — the Ryzen 7 9700X's single-thread performance, which scores 2,211 in Cinebench R23 single-core and 1,280 in 3DMark single-thread, caps the frame rate well below what the GPU could theoretically deliver. This is characteristic of simulation games, where game logic and physics calculations often bottleneck at lower resolutions.

The Medium preset provides the most complete data with min and max FPS values. At 4K Medium, the system averages 133 FPS with a minimum of 113 and maximum of 153, showing tight frame pacing. At 1440p Medium, the average rises to 254 FPS with a range of 216 to 292. The 1080p Medium result of 402 FPS (minimum 342, maximum 462) further confirms that the CPU becomes the primary constraint at lower resolutions, as the GPU would likely sustain far higher frame rates given its 3DMark Steel Nomad DX12 score of 14,326.

Ultra settings produce the lowest frame rates across all resolutions, as expected. The system delivers 270 FPS at 1080p Ultra, 171 FPS at 1440p Ultra, and 89 FPS at 4K Ultra. The 4K Ultra result of 89 FPS is particularly notable — it remains above 60 FPS, but the margin narrows compared to High settings, suggesting that the most demanding preset pushes the GPU closer to its limits. The scaling from 1440p Ultra to 4K Ultra (a 48% reduction) mirrors the pattern seen at Low settings, indicating consistent GPU-bound behavior at the highest preset.

How This Combo Ranks

The combo ranks 9th out of 3,002 tested combinations in Pc Building Simulator, placing it in the top 0.3% of all configurations. This ranking reflects the synergy between the Ryzen 7 9700X and RTX 5090 D, though the GPU's contribution to this ranking is more substantial given the game's resolution-dependent scaling. The CPU's 86th percentile standing among all CPUs and the GPU's 92nd percentile among all GPUs both contribute to this elite overall position.

The Ryzen 7 9700X's nearest rivals provide context for its processing capability. The Intel Core i9-14901E scores 37,911 average benchmark points, a mere 0.1% behind the 9700X's 37,943. The AMD Ryzen AI 9 HX 370 also trails by 0.1% with 37,904 points, while the Intel Core 5 211E and AMD Ryzen AI Embedded P132 are 0.3% and 0.4% behind respectively. This clustering indicates that the 9700X's performance is representative of the top tier of desktop processors, with no single rival holding a meaningful advantage in aggregate benchmarks.

For the GPU, the RTX 5090 D's nearest rivals show a more varied picture. The AMD Radeon RX 6650M XT scores 76,904, which is 1.1% lower than the 5090 D's 77,712. However, the AMD Radeon RX 6850M XT scores 78,940, outperforming the 5090 D by 1.6%. The NVIDIA Tesla P100 variants (PCIe 12 GB and PCIe 16 GB) score 79,396 and 79,605 respectively, leading by 2.1% and 2.4%. These deltas are modest, suggesting that the 5090 D's 92nd percentile ranking is well-earned, but that several competing GPUs offer comparable aggregate performance in this benchmark suite.

The combination's 9th-place ranking out of 3,002 combos indicates that while both components are individually strong, their pairing produces exceptional results in this specific game. The high frame rates measured across all settings — even the lowest result of 89 FPS at 4K Ultra — confirm that this combo never approaches the performance floor where gameplay would become compromised.

FAQ

Q: What is the highest average frame rate this combo achieves in Pc Building Simulator?

A: The highest measured average is 468 FPS at 1920x1080 with Low settings. This result indicates CPU limitation, as the Ryzen 7 9700X's single-thread score of 2,211 in Cinebench R23 becomes the bottleneck at this resolution and preset.

Q: Can this combo maintain 60 FPS at 4K with the highest preset?

A: Yes. At 3840x2160 with Ultra settings, the system averages 89 FPS. This is comfortably above the 60 FPS threshold, and even the lowest recorded frame rate at 4K (113 FPS minimum at Medium settings) remains well above 60 FPS.

Q: How much performance is lost when moving from 1440p to 4K at High settings?

A: The average frame rate drops from 179 FPS at 2560x1440 High to 94 FPS at 3840x2160 High, representing a 47% reduction. This substantial scaling confirms that the RTX 5090 D's rendering workload increases significantly with pixel count.

Q: Which component limits performance at 1080p with Low settings?

A: The CPU is the limiting factor. The 468 FPS average at 1080p Low is constrained by the Ryzen 7 9700X's processing capability, as evidenced by its single-thread benchmark scores (1,280 in 3DMark, 2,211 in Cinebench R23). The GPU could likely produce higher frame rates if the CPU were not the bottleneck.

Q: How does the Ultra preset compare to High at 4K?

A: Ultra averages 89 FPS at 3840x2160, while High averages 94 FPS — a difference of only 5 FPS (approximately 5%). This small gap suggests that the additional visual fidelity of the Ultra preset comes at minimal performance cost at this resolution.

Q: What is the frame time consistency like at Medium settings?

A: The Medium preset shows tight frame pacing. At 1080p, the minimum of 342 FPS and maximum of 462 FPS bracket an average of 402 FPS, indicating a 30% spread. At 1440p, the range is 216 to 292 FPS around a 254 FPS average (30% spread), while at 4K, the range is 113 to 153 FPS around a 133 FPS average (30% spread). This consistent 30% spread across resolutions suggests stable performance characteristics.

Measured FPS Breakdown

At 1920x1080, the system produces its highest frame rates. Low settings yield 468 FPS average, Medium produces 402 FPS (minimum 342, maximum 462), High delivers 284 FPS, and Ultra achieves 270 FPS. The gap between Low and Medium (66 FPS) is larger than the gap between High and Ultra (14 FPS), indicating diminishing returns as settings increase. The 1080p results show that even the most demanding preset stays well above 240 FPS, making this resolution ideal for high-refresh-rate displays.

Moving to 2560x1440, the frame rates remain exceptionally high but show the expected reduction. Low settings average 358 FPS, Medium delivers 254 FPS (minimum 216, maximum 292), High produces 179 FPS, and Ultra reaches 171 FPS. The pattern mirrors 1080p, with Low to Medium showing a 104 FPS drop and High to Ultra showing only an 8 FPS difference. The 1440p results demonstrate that this combo can drive high-refresh-rate 1440p monitors even at Ultra settings.

At 3840x2160, the system remains highly playable but the GPU's workload becomes more apparent. Low settings average 187 FPS, Medium delivers 133 FPS (minimum 113, maximum 153), High produces 94 FPS, and Ultra achieves 89 FPS. The 4K results show a more even distribution of performance across settings compared to lower resolutions, with each preset step costing roughly 30-50 FPS. The minimum recorded frame rate across all 4K tests is 113 FPS (Medium), confirming that the system never drops below 60 FPS at this resolution regardless of settings.

Comparing across resolutions at the same setting reveals consistent scaling. At Low settings, 1080p to 1440p costs 110 FPS (23%), and 1440p to 4K costs 171 FPS (48%). At Medium settings, the drops are 148 FPS (37%) and 121 FPS (48%) respectively. At High settings, the drops are 105 FPS (37%) and 85 FPS (47%). At Ultra settings, the drops are 99 FPS (37%) and 82 FPS (48%). This consistency — particularly the 47-48% reduction from 1440p to 4K across all settings — indicates that the RTX 5090 D's rendering pipeline scales predictably with resolution.

Settings Recommendations

For 1080p displays, the Ultra preset at 270 FPS is the clear choice. The performance headroom is substantial, and the 14 FPS difference between High and Ultra is negligible in gameplay terms. Even with frame rate fluctuations, the system maintains over 240 FPS at Ultra, making this the optimal configuration for high-refresh-rate 1080p monitors. Players prioritizing maximum visual fidelity should select Ultra without concern for performance degradation.

At 1440p, Ultra at 171 FPS remains the best option. The 8 FPS difference between High and Ultra is imperceptible in practice, and 171 FPS exceeds the refresh rate of most 1440p gaming monitors (typically 144Hz or 165Hz). However, players with 240Hz 1440p displays might prefer High at 179 FPS to better utilize the display's capabilities, though the margin is modest. The Medium preset at 254 FPS offers the highest frame rates for competitive play, but the visual quality reduction is substantial compared to Ultra.

For 4K displays, the choice depends on refresh rate priorities. The Ultra preset at 89 FPS provides the best visual quality and remains above 60 FPS, making it suitable for 60Hz displays and most 120Hz displays. High at 94 FPS offers a slight performance boost with minimal visual difference, which might appeal to players seeking extra headroom. The Medium preset at 133 FPS is the best option for 120Hz or 144Hz 4K displays, providing a significant frame rate increase while maintaining acceptable visual quality. Low at 187 FPS is unnecessary for practical 4K gaming, as the visual degradation outweighs the performance gain.

Across all resolutions, the data suggests that this combo handles the Ultra preset without issue. The lowest recorded Ultra frame rate is 89 FPS at 4K, which remains comfortably playable. Players should default to Ultra settings and only adjust downward if they have specific refresh rate targets that exceed these frame rates.

CPU Role

The AMD Ryzen 7 9700X is an 8-core, 16-thread processor based on the Zen 5 architecture (Granite Ridge codename), manufactured on TSMC's 4 nm process. Its base clock of 3.80 GHz boosts to 5.50 GHz, and it carries a 65 W TDP. The processor features 80 KB of L1 cache per core, 1 MB of L2 per core, and 32 MB of shared L3 cache. Memory support includes DDR5 with dual-channel configuration and 89.6 GB/s bandwidth.

In Pc Building Simulator, the CPU's role is most evident at lower resolutions and settings. The 1080p Low result of 468 FPS demonstrates CPU limitation, as the GPU's frame generation capability exceeds what the processor can feed. The Ryzen 7 9700X's single-thread performance — scoring 1,280 in 3DMark single-thread, 346 in Cinebench R15 single-core, 2,211 in Cinebench R23 single-core, and 3,023 in Geekbench single-core — is critical for simulation game logic, where single-threaded operations often dominate.

Multi-threaded performance also contributes to the system's capability. The processor scores 9,824 in 3DMark 16-thread, 9,771 in 3DMark max-threads, 20,485 in Cinebench R23 multicore, and 17,906 in Geekbench multicore. The 8-core configuration with 16 threads provides ample parallel processing for game systems that utilize multiple threads, though the 1080p Low results suggest that the single-thread ceiling is the primary constraint in this title.

The CPU's 86th percentile ranking among all CPUs, with an average benchmark score of 37,943, places it in the upper tier of processors. Its nearest rivals — the Intel Core i9-14901E (37,911, +0.1%), AMD Ryzen AI 9 HX 370 (37,904, +0.1%), Intel Core 5 211E (37,829, +0.3%), and AMD Ryzen AI Embedded P132 (37,804, +0.4%) — are all within 0.4% in aggregate performance. This tight clustering indicates that the 9700X's processing capability is representative of the current high-end desktop CPU market.

GPU Role

The NVIDIA GeForce RTX 5090 D is built on the Blackwell 2.0 architecture (GB202 chip), manufactured on TSMC's 5 nm process. It features 21,760 shading units, 680 texture mapping units, and 176 raster output units, along with 170 ray tracing cores and 680 tensor cores. The GPU operates at a base clock of 2017 MHz with a boost clock of 2407 MHz. Memory consists of 32 GB of GDDR7 on a 512-bit bus, providing 1.79 TB/s of bandwidth.

The GPU's compute capabilities are substantial: 104.8 TFLOPS of FP32 performance and an equal 104.8 TFLOPS of FP16 performance. Pixel rate is 423.6 GPixel/s and texture rate is 1,636.8 GTexel/s. In Pc Building Simulator, these resources are primarily exercised at higher resolutions and settings, where the rendering workload scales with pixel count. The 4K Ultra result of 89 FPS demonstrates that even this massive GPU experiences meaningful workload at the highest configuration.

The RTX 5090 D's 92nd percentile ranking among all GPUs, with an average benchmark score of 77,712, places it near the top of the performance hierarchy. Its nearest rivals show mixed results: the AMD Radeon RX 6650M XT trails by 1.1% (76,904), while the AMD Radeon RX 6850M XT leads by 1.6% (78,940). The NVIDIA Tesla P100 PCIe 12 GB and 16 GB variants lead by 2.1% (79,396) and 2.4% (79,605) respectively. These deltas suggest that while the 5090 D is not the absolute fastest GPU in this benchmark suite, it offers comparable aggregate performance to several competing products.

In the context of Pc Building Simulator, the GPU's role becomes dominant at 1440p and 4K resolutions. The consistent 47-48% frame rate reduction from 1440p to 4K across all settings indicates GPU-bound scaling, as the rendering pipeline's throughput decreases proportionally with pixel count. The 32 GB of GDDR7 memory provides ample capacity for the game's assets, and the 1.79 TB/s bandwidth ensures that texture streaming and memory-intensive operations do not bottleneck performance. The GPU's 575 W TDP and 950 W suggested PSU requirement reflect its high power draw, but the measured performance justifies this for users prioritizing maximum frame rates in simulation titles.