Pc Building Simulator

Pc Building Simulator is a simulation title that stresses system configuration logic more than raw graphical horsepower, yet the measured data for the AMD Ryzen 7 9700F and AMD Radeon RX 9060 combo reveals a clear performance curve across resolutions and settings. The 8-core, 16-thread CPU with a 5.50 GHz boost clock and the 8 GB Radeon RX 9060 produce playable frame rates at 1080p and 1440p, but the 4K results show the GPU hitting its limits, especially at higher quality presets.

Resolution Scaling

The FPS drop from 1080p to 4K is steep and consistent across all settings, indicating that the Radeon RX 9060 is the primary bottleneck at higher resolutions. At Low settings, the average frame rate falls from 247 FPS at 1920x1080 to 156 FPS at 2560x1440, a 37% reduction, and then to 82 FPS at 3840x2160, another 47% drop. This scaling pattern shows that even at the lowest graphical load, the GPU's 128-bit memory bus and 8 GB VRAM cannot maintain the same throughput as the pixel count quadruples from 1080p to 4K.

Moving to Medium settings, the averages are 175 FPS at 1080p, 111 FPS at 1440p, and 58 FPS at 4K. The gap between 1440p and 4K narrows slightly in percentage terms (48% drop) compared to Low, which suggests the CPU is starting to share the load more evenly, but the absolute numbers remain low at 4K. At High settings, the trend continues: 124 FPS at 1080p, 78 FPS at 1440p, and 41 FPS at 4K. The 4K result is barely above the 30 FPS threshold for playability, and the 1440p number is respectable but not stellar.

Ultra settings are the most demanding, producing 118 FPS at 1080p, 74 FPS at 1440p, and 39 FPS at 4K. The difference between High and Ultra at 1080p is only 6 FPS, but at 4K it is just 2 FPS, meaning the GPU is already saturated. The data suggests that 1440p with High or Ultra settings is the sweet spot for this combo, as 4K requires dropping to Low or Medium to stay above 60 FPS, and even then the 58 FPS Medium result is borderline.

The min FPS figures, available only for Medium settings, reinforce the resolution scaling story. At 1080p Medium, the min FPS is 149, which is well above any stutter threshold. At 1440p Medium, the min FPS drops to 94, still smooth. At 4K Medium, the min FPS is 49, which is noticeably lower and indicates occasional frame hitches, likely due to memory bandwidth constraints. The 4K Ultra result of 39 FPS average with no min FPS data suggests the experience is consistently slow rather than bursty.

CPU Role

The AMD Ryzen 7 9700F is a Zen 5 architecture part on the AM5 socket, with 8 cores and 16 threads. Its base clock is 3.80 GHz, boosting up to 5.50 GHz, and it has a 65 W TDP. The benchmark data shows a Passmark single-thread score of 4691 and a multithread score of 36470, placing it in the 94th percentile of all CPUs. For a simulation game like Pc Building Simulator, which relies on logic calculations and system state tracking, the CPU's single-thread performance is critical, and this chip excels there.

Comparing to its nearest rivals, the Ryzen 7 9700F has an average benchmark score of 69996. The AMD Ryzen 9 7940HX scores 69875, which is 0.2% lower, meaning the 9700F is essentially tied with a mobile flagship. The Intel Core i7-14700KF scores 70163, which is 0.2% higher, and the AMD Ryzen 9 7950X scores 69515, which is 0.7% lower. The Intel Core i7-14700K scores 69355, 0.9% lower. These tiny deltas mean the 9700F is in the same performance class as these high-end parts, and for a game that is not heavily threaded, the 8-core count is more than sufficient.

The CPU's 32 MB of shared L3 cache and 89.6 GB/s memory bandwidth are adequate for simulation workloads, but the data shows that the CPU is rarely the limiting factor in this game. At 1080p Low, the 247 FPS average is likely CPU-bound, but the GPU still manages to keep up. At higher resolutions, the GPU load increases, and the CPU has headroom to spare. The 16 threads ensure that background simulation tasks do not cause frame drops, as evidenced by the stable min FPS numbers at 1080p and 1440p Medium.

FAQ

Q: What is the best resolution for this combo in Pc Building Simulator?

A: The data shows 2560x1440 with High settings producing 78 FPS average, which is smooth. 1920x1080 Ultra hits 118 FPS, but 4K Ultra drops to 39 FPS, so 1440p is the practical maximum for a consistent experience.

Q: Can this combo handle 4K gaming in this title?

A: Only at lower settings. 4K Low averages 82 FPS, and 4K Medium averages 58 FPS. 4K High drops to 41 FPS, and 4K Ultra is 39 FPS, so 4K is playable but not at High or Ultra quality.

Q: How does the CPU compare to its closest rivals?

A: The Ryzen 7 9700F has an average benchmark score of 69996. It is 0.2% faster than the AMD Ryzen 9 7940HX, 0.2% slower than the Intel Core i7-14700KF, 0.7% faster than the AMD Ryzen 9 7950X, and 0.9% faster than the Intel Core i7-14700K.

Q: Is the 8 GB VRAM a problem for this game?

A: At 1080p and 1440p, the 8 GB memory is sufficient, as shown by the stable frame rates. At 4K, the 128-bit bus and 8 GB capacity likely contribute to the performance drop, especially at High and Ultra settings where the average FPS falls below 45.

Q: What is the FPS difference between Low and Ultra settings at 1080p?

A: The gap is significant. Low settings produce 247 FPS, while Ultra produces 118 FPS, a difference of 129 FPS. This shows that the GPU is heavily taxed by the higher quality presets, even at the lowest resolution.

Q: Does the CPU bottleneck the GPU at any point?

A: Based on the data, the CPU does not appear to bottleneck until possibly the 1080p Low setting, where the 247 FPS average is exceptionally high. At all other settings and resolutions, the GPU is the limiting factor, as the FPS scales with resolution and settings in a predictable manner.

How This Combo Ranks

The AMD Ryzen 7 9700F and AMD Radeon RX 9060 combination ranks 1710 out of 3002 tested combos in Pc Building Simulator. This places it in the lower-middle tier of all possible configurations, which is surprising given the CPU's high percentile ranking. The reason is the GPU's performance classification. The Radeon RX 9060 sits in the 59th percentile of all GPUs, with an average benchmark score of 16014. Its nearest rivals include the NVIDIA GeForce RTX 3060 Ti, which scores 16129 (0.7% higher), and the AMD Radeon RX 7700, which scores 15852 (1% lower).

The combo rank of 1710 out of 3002 means it is better than roughly 43% of tested systems, but worse than the majority. This is because many other combos pair higher-tier GPUs with mid-range CPUs, and Pc Building Simulator likely benefits more from GPU horsepower than CPU muscle. The 8 GB VRAM on the RX 9060 is a limiting factor for high-resolution textures, which this simulation game may utilize, but the data shows the CPU is not holding the system back.

Within the context of the game, the 9700F's 94th percentile CPU score is wasted at 4K, where the GPU produces only 41 FPS on High. At 1080p, the combo is capable of 247 FPS on Low, which is excellent for high-refresh-rate monitors. The ranking suggests that users with this combo should prioritize 1080p or 1440p gaming to get the most out of the hardware, as the 4K performance is not competitive with higher-ranked combos that feature GPUs with more VRAM and wider memory buses.

GPU Role

The AMD Radeon RX 9060 is built on the RDNA 4.0 architecture with the Navi 44 chip, using a 4 nm process from TSMC. It has 1792 shading units, 112 texture mapping units, and 64 render output units. The GPU operates at a base clock of 1700 MHz, a game clock of 2400 MHz, and a boost clock of 2990 MHz. Memory is 8 GB of GDDR6 on a 128-bit bus, providing 288.0 GB/s of bandwidth. This configuration yields a Passmark G3D score of 17631 and an average benchmark score of 16014.

In Pc Building Simulator, the GPU's role becomes more pronounced as resolution increases. At 1080p Low, the 247 FPS average is likely limited by the CPU's single-thread performance, but at 1080p Ultra, the 118 FPS average shows the GPU is working harder. The 1440p results, ranging from 156 FPS at Low to 74 FPS at Ultra, demonstrate a linear scaling that is typical of a GPU-bound scenario. The 4K results, with 82 FPS at Low and 39 FPS at Ultra, show the GPU struggling to maintain frame rates due to the memory bandwidth and VRAM capacity.

The 128-bit memory bus is a notable bottleneck at 4K. The 288.0 GB/s bandwidth is insufficient for the pixel throughput required at 3840x2160, especially with higher quality textures. The 8 GB VRAM is also a concern, as modern simulation games may exceed this capacity at 4K with Ultra settings, leading to texture swapping and frame drops. The min FPS of 49 at 4K Medium confirms this, as it is 15% lower than the average of 58, indicating inconsistent frame pacing.

At 1080p and 1440p, the GPU performs admirably. The 175 FPS average at 1080p Medium and 111 FPS at 1440p Medium are smooth experiences, and even the 124 FPS at 1080p High is excellent. The GPU's 59th percentile ranking among all GPUs is reflected in these results, as it outperforms the AMD Radeon R9 370X by 1% and the AMD Radeon Pro W5500 by 2.1%, but trails the NVIDIA GeForce RTX 3060 Ti by 0.7%. This places the RX 9060 in a competitive mid-range segment, suitable for 1080p and 1440p gaming.

Measured FPS Breakdown

At 1920x1080, the combo delivers its highest frame rates. Low settings produce an average of 247 FPS, which is exceptional for any game. Medium settings average 175 FPS, with a minimum of 149 and a maximum of 201, showing consistent performance. High settings average 124 FPS, and Ultra settings average 118 FPS. The difference between High and Ultra is minimal at 6 FPS, suggesting that the Ultra preset adds little graphical benefit for the performance cost. The 118 FPS at Ultra is still well above the 60 FPS threshold, making 1080p gaming a strong suit for this combo.

At 2560x1440, the frame rates remain playable but drop significantly. Low settings average 156 FPS, which is still high enough for most monitors. Medium settings average 111 FPS, with a minimum of 94 and a maximum of 127, indicating a smooth experience with no major stutters. High settings average 78 FPS, which is acceptable for casual play. Ultra settings average 74 FPS, making it the first setting where the frame rate approaches the 60 FPS line. The 1440p results are consistent with the GPU's mid-range positioning, and the 78 FPS at High is a good target for users with 1440p displays.

At 3840x2160, the performance drops sharply. Low settings average 82 FPS, which is surprisingly playable given the GPU's specs. Medium settings average 58 FPS, with a minimum of 49 and a maximum of 66, indicating that the experience is borderline, with occasional drops below 60 FPS. High settings average 41 FPS, which is not smooth. Ultra settings average 39 FPS, which is the worst result in the dataset. The 4K results clearly show that the RX 9060 is not meant for 4K gaming at high quality, and users should stick to 1080p or 1440p for the best experience.

The data also reveals that the CPU is not a bottleneck at any resolution. The Ryzen 7 9700F's single-thread score of 4691 and multithread score of 36470 are more than sufficient for this simulation title. The frame rates scale with resolution and settings in a predictable manner, which is a sign of a balanced system where the GPU is the limiting factor. For users with a 1440p monitor, the High setting is the recommended choice, as it provides a 78 FPS average without the performance hit of Ultra. For 1080p users, Ultra settings are viable, but the 6 FPS gain over High is negligible, and High offers better stability.