Pc Building Simulator

The AMD Ryzen 7 7800X3D paired with the NVIDIA GeForce RTX 5090 D in Pc Building Simulator produces frame rates that are exceptionally high, yet the data reveals a distinct imbalance in how much each component contributes. The 8-core, 16-thread CPU with a base clock of 4.20 GHz and boost of 5.00 GHz, featuring a large 96 MB shared L3 cache, is built for gaming workloads. Meanwhile, the RTX 5090 D, with its 32 GB of GDDR7 memory on a 512-bit bus and a boost clock of 2407 MHz, is an absolute powerhouse for pixel pushing. The measured FPS data, ranging from 89 at 4K Ultra to 379 at 1080p Low, suggests that the game's performance ceiling is dictated by the GPU at higher resolutions, while the CPU’s capability becomes the limiting factor at lower settings.

CPU Role — cores, clocks, and how they relate to this game's results

The Ryzen 7 7800X3D’s architecture is the primary reason this combo achieves such high frame rates in Pc Building Simulator. With 8 cores and 16 threads, it is not the highest core-count processor available, but its Zen 4 design and 3D V-Cache technology, which provides 96 MB of shared L3 cache, are tailored for simulation and gaming tasks that demand low latency access to data. The benchmark scores support this: the Cinebench R23 multi-core score is 16817, while the single-core score is 1713. This indicates that the CPU is more than capable of handling the game’s physics and logic threads, but the single-thread performance is what often matters most in games that are not fully multi-threaded.

In Pc Building Simulator, which simulates the assembly and operation of PCs, the game logic involves tracking many small components and their states. The Ryzen 7 7800X3D’s large cache ensures that the CPU can quickly access the data needed for these calculations, reducing stutter and maintaining high average FPS. The 3DMark scores show a progression from 1887 with 2 threads to 7980 with 16 threads, demonstrating excellent scaling. However, the passmark_single_thread score of 3759 and the 3dmark_single_thread score of 959 indicate that even when the game is limited to a few threads, the CPU does not bottleneck the GPU significantly.

The CPU’s performance relative to its peers is notable. The nearest rival, the AMD Ryzen 7 8700G, has an average benchmark score of 33089, which is essentially identical to the 7800X3D’s 33079, a deltaPct of 0. This suggests that in raw average benchmark terms, these CPUs are interchangeable. However, the 7800X3D’s percentile ranking of 83 among all CPUs confirms it is a top-tier performer. The data shows that in this game, the CPU is rarely the limiting factor at high settings, as the FPS is often above 270 at 1080p, but at lower settings, the CPU’s capability becomes more apparent, with FPS reaching 379 at 1080p Low, indicating that the CPU can push the GPU to its limits.

GPU Role — VRAM, clocks, and how they relate to this game's results

The NVIDIA GeForce RTX 5090 D is the dominant force in this pairing, and its specifications make it overkill for a simulation game like Pc Building Simulator. The GPU features 32 GB of GDDR7 memory, which is more than enough for any resolution or texture pack the game can throw at it. The 512-bit memory bus provides a bandwidth of 1.79 TB/s, ensuring that the GPU never has to wait for data. The boost clock of 2407 MHz, combined with 21760 shading units, gives the RTX 5090 D a theoretical FP32 performance of 104.8 TFLOPS. This raw compute power is what drives the high frame rates seen in the measured FPS data.

In Pc Building Simulator, the GPU’s role is to render the 3D environment, which includes detailed PC cases, components, and lighting effects. At 4K Ultra settings, the GPU is heavily taxed, and the average FPS drops to 89, which is still playable but shows the GPU’s limits. The benchmark scores for the RTX 5090 D are impressive, with a 3DMark Steel Nomad DX12 score of 14326 and a Geekbench Vulkan score of 376915. These scores indicate that the GPU is a top-tier performer, ranking in the 92nd percentile of all GPUs. However, the nearest rivals are interesting: the AMD Radeon RX 6650M XT has an average score of 76904, only 1.1% lower, while the RX 6850M XT is 1.6% higher. This suggests that while the RTX 5090 D is powerful, the game’s engine may not fully utilize all its features.

The GPU’s 32 GB VRAM is a key advantage in this game, as it allows for high-resolution textures without any memory pressure. The measured FPS shows that even at 4K High, the average FPS is 94, which is a 5 FPS drop from 4K Ultra’s 89, indicating that the GPU is the bottleneck at 4K. The data implies that the RTX 5090 D is so powerful that the CPU becomes the limiting factor at lower resolutions, but at 4K, the GPU’s raw fill rate and pixel rate of 423.6 GPixel/s are what determine the final frame rate.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The measured FPS data provides a clear picture of how the system scales across resolutions. At 1080p Low, the average FPS is 379, which drops to 325 at 1440p Low, and then plummets to 187 at 4K Low. This is a 50.7% drop from 1080p to 4K, indicating that the GPU is becoming the primary bottleneck as resolution increases. The CPU’s performance is relatively constant, so the frame rate drop is directly attributable to the GPU’s workload.

Looking at the High settings, the scaling is similar: 284 FPS at 1080p, 179 FPS at 1440p, and 94 FPS at 4K. The drop from 1080p to 1440p is 37%, and from 1440p to 4K is 47.5%. This non-linear scaling suggests that the game is heavily GPU-bound at higher resolutions. The Medium settings show a similar trend, with 333 FPS at 1080p, 254 FPS at 1440p, and 133 FPS at 4K. The min FPS values for Medium settings at 1080p are 283, at 1440p are 216, and at 4K are 113, which further confirms the GPU’s role as the limiting factor.

The Ultra settings tell the most interesting story. At 1080p Ultra, the average FPS is 270, which drops to 171 at 1440p Ultra, and then to 89 at 4K Ultra. The drop from 1080p to 1440p is 36.7%, but the drop from 1440p to 4K is 47.9%. This indicates that the GPU is being pushed to its absolute limit at 4K Ultra, and the 32 GB of VRAM is being utilized, but the frame rate is still high enough for smooth gameplay. The data suggests that the CPU is not the bottleneck at any resolution, as even at 1080p Low, the FPS is 379, which is far above the CPU’s theoretical limit. Instead, the GPU’s performance scales predictably with resolution, confirming that the RTX 5090 D is the component that determines the final frame rate in Pc Building Simulator.

FAQ

Q: Which component is the bottleneck at 1080p Low settings?

A: The data shows an average FPS of 379 at 1080p Low, which is the highest recorded in the dataset. This suggests that the CPU is not the bottleneck, as the Ryzen 7 7800X3D has a passmark_single_thread score of 3759 and a 3dmark_single_thread score of 959. The GPU is likely the limiting factor, as its performance at 1080p is still high but not unlimited.

Q: How does the RTX 5090 D's memory configuration impact 4K performance?

A: The RTX 5090 D has 32 GB of GDDR7 memory with a 512-bit bus and 1.79 TB/s bandwidth. At 4K Ultra, the average FPS is 89, which is lower than at 1440p Ultra (171 FPS). The 32 GB VRAM ensures no memory pressure, but the GPU’s compute power is the limiting factor at 4K, as evidenced by the 47.9% FPS drop from 1440p to 4K.

Q: Is the Ryzen 7 7800X3D a good match for the RTX 5090 D?

A: The combo ranks 53rd out of 3002 tested combos in Pc Building Simulator, indicating it is a top-tier pairing. The CPU’s 83rd percentile ranking and the GPU’s 92nd percentile ranking suggest a balanced system, but the FPS data shows the GPU is more often the bottleneck, especially at resolutions above 1080p.

Q: What is the performance difference between the RTX 5090 D and its nearest rival?

A: The nearest rival, the AMD Radeon RX 6650M XT, has an average benchmark score of 76904, which is 1.1% lower than the RTX 5090 D’s 77712. The RX 6850M XT is 1.6% higher, and the Tesla P100s are 2.1% and 2.4% higher, respectively. This shows the RTX 5090 D is competitive but not the absolute fastest in all benchmarks.

Q: Can this system maintain 60 FPS at 4K Ultra?

A: Yes, the measured average FPS at 4K Ultra is 89, which is well above 60. The minimum FPS is not provided for Ultra settings, but the average indicates that the system can easily maintain smooth gameplay at 4K with all settings maxed out.

Q: What does the FPS drop from 1080p to 4K reveal about the game’s engine?

A: The FPS drops significantly from 1080p to 4K across all settings, with the largest drop being from 1080p Low (379 FPS) to 4K Low (187 FPS), a 50.7% reduction. This indicates that the game’s engine is highly GPU-bound at higher resolutions, and the CPU’s role is less significant as resolution increases.

How This Combo Ranks

The AMD Ryzen 7 7800X3D and NVIDIA GeForce RTX 5090 D combination ranks 53rd out of 3002 tested combos in Pc Building Simulator. This places it in the top 1.8% of all tested configurations, which is an exceptional result. The ranking reflects the synergy between the CPU and GPU, but the data shows that the GPU is the primary driver of this performance. The CPU’s percentile ranking of 83 and the GPU’s percentile ranking of 92 indicate that both components are top-tier, but the GPU’s raw power is what pushes this combo to such a high rank.

The rank of 53 is particularly impressive given the game’s nature. Pc Building Simulator is a simulation game that may not be optimized for multi-threading, but the high FPS numbers suggest that the Ryzen 7 7800X3D’s single-thread performance and large cache are sufficient to avoid bottlenecks. The GPU’s 32 GB VRAM and high compute power ensure that even at 4K Ultra, the system can maintain playable frame rates. The data indicates that this combo is overkill for 1080p gaming, but it provides a future-proof solution for 4K gaming with maximum settings.

The nearest rivals for the CPU, such as the AMD Ryzen 7 8700G and Intel Core i7-13650HX, have identical average scores, but the 7800X3D’s 3D V-Cache technology is not reflected in these averages. The GPU’s rivals, like the RX 6650M XT, are significantly less powerful, but the RTX 5090 D’s rank is still high due to its overall performance. The combo rank of 53 out of 3002 confirms the fact that this is a high-end configuration that will excel in most games, not just Pc Building Simulator.

Settings Recommendations

Based on the measured FPS data, the optimal settings for Pc Building Simulator with this combo depend on the resolution. At 1080p, the Ultra preset provides an average FPS of 270, which is well above the 60 FPS threshold for smooth gameplay. The High preset at 1080p offers 284 FPS, a slight improvement, but the Ultra settings provide better visual quality with only a 5% FPS drop. For 1080p, the Ultra preset is recommended for the best visual experience without sacrificing performance.

At 1440p, the High preset yields 179 FPS, while Ultra yields 171 FPS. The difference is minimal, and both are well above 60 FPS. The Medium preset at 1440p offers 254 FPS, but the visual quality is reduced. For 1440p, the Ultra preset is recommended, as the 171 FPS average is still exceptionally high, and the min FPS for Medium is 216, indicating that even Ultra would maintain smooth gameplay. The data suggests that the system is not stressed at 1440p, so users can max out settings.

At 4K, the Ultra preset provides 89 FPS, which is still above 60 FPS but shows the system’s limits. The High preset at 4K offers 94 FPS, a 5.6% improvement over Ultra. For 4K, the High preset is recommended to ensure a higher average FPS, as the visual difference between High and Ultra may not be noticeable in a simulation game. The Medium preset at 4K offers 133 FPS, which is also viable, but the High preset strikes the best balance between visual fidelity and performance. The Low preset at 4K provides 187 FPS, but this is unnecessary as the system can handle higher settings.

Measured FPS Breakdown

The measured FPS data for this combo in Pc Building Simulator is detailed below, showing the average FPS for each resolution and settings combination. The data includes min and max FPS where available, providing a complete picture of performance.

At 1920x1080, the Low preset achieves an average FPS of 379, which is the highest in the dataset. The Medium preset at 1080p averages 333 FPS, with a min FPS of 283 and a max FPS of 383. The High preset at 1080p averages 284 FPS, and the Ultra preset averages 270 FPS. The drop from Low to Ultra is 28.8%, indicating that the GPU is being taxed more as settings increase, but the system remains highly playable.

At 2560x1440, the Low preset averages 325 FPS, a 14.2% drop from 1080p Low. The Medium preset at 1440p averages 254 FPS, with a min FPS of 216 and a max FPS of 292. The High preset averages 179 FPS, and the Ultra preset averages 171 FPS. The scaling from 1080p to 1440p shows a consistent drop, with the Ultra preset dropping 36.7% from 1080p, indicating the GPU’s workload is increasing.

At 3840x2160, the Low preset averages 187 FPS, a 42.5% drop from 1440p Low. The Medium preset at 4K averages 133 FPS, with a min FPS of 113 and a max FPS of 153. The High preset averages 94 FPS, and the Ultra preset averages 89 FPS. The 4K data shows a significant performance hit, but the system still maintains above 60 FPS even at Ultra. The min FPS for Medium at 4K is 113, indicating that frame drops are minimal, and the system is stable across all settings.