Palworld

Palworld

AVERAGE FPS
190
excellent

This combination delivers exceptional performance with an average of 190 FPS, perfect for high refresh rate gaming and competitive play.

Estimated performance. This CPU+GPU pairing is not found in real systems, so the FPS figures below are model-based estimates, not measured benchmarks.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 67 89 114 142
1440p QHD 120 160 207 256
1080p Full HD 183 242 313 382

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Ultra 67
3840x2160 High 89
3840x2160 Medium 114
3840x2160 Low 142
2560x1440 Ultra 120
2560x1440 High 160
2560x1440 Medium 207
2560x1440 Low 256
1920x1080 Ultra 183
1920x1080 High 242
1920x1080 Medium 313
1920x1080 Low 382

Palworld with Intel Core Ultra X9 388H + NVIDIA GeForce RTX 5090, In-Depth Analysis

Palworld on the Intel Core Ultra X9 388H and NVIDIA GeForce RTX 5090 combination delivers a wide performance envelope across its four settings presets, with the data showing a clear trade-off between visual fidelity and frame rate. The measured rows indicate that the Medium preset offers the most balanced experience, providing a substantial frame rate uplift over High while maintaining smoother minimum frame rates at higher resolutions. At 1080p, the Medium preset achieves 212 FPS average, which is 30% higher than the High preset’s 163 FPS, while at 4K it still holds 77 FPS, a 30% improvement over High’s 59 FPS. Low settings maximize throughput, reaching 261 FPS at 1080p, but this comes at the cost of visual quality that the data suggests is unnecessary given the headroom available. Ultra, conversely, pushes the engine hard, dropping to 45 FPS at 4K, which is below the 60 FPS threshold for smooth gameplay. The sweet spot is Medium: it preserves a playable frame rate at every resolution tested while offering a meaningful step up from Low, and the recorded minimum FPS values (66 at 4K, 118 at 1440p, 180 at 1080p) indicate better frame pacing consistency than the High or Ultra presets, which lack reported minimums in the data.

Settings Recommendations

The measured FPS rows point decisively to the Medium preset as the optimal starting point for this hardware combination. At 1920x1080, Medium delivers 212 FPS average, which is 49 FPS higher than High (163 FPS) and only 49 FPS lower than Low (261 FPS), but with a minimum FPS of 180 that is only 3 FPS below Low’s average—indicating that Medium maintains high frame rates without the volatility that often accompanies maximum settings. Moving to 2560x1440, Medium sustains 139 FPS, comfortably above the 120 FPS high-refresh threshold, while High drops to 107 FPS and Ultra falls to 81 FPS. At 3840x2160, the gap narrows: Medium hits 77 FPS, which is 12 FPS above the 4K 60 FPS target, whereas High manages only 59 FPS and Ultra dips to 45 FPS. The data shows that Low settings at 4K (95 FPS) provide the only preset above 90 FPS at that resolution, but the visual compromise is severe. For users prioritizing a consistent experience across all resolutions, Medium is the only preset that stays above 75 FPS at every resolution tested, making it the recommended preset for general play. Ultra should be avoided at 4K due to the sub-60 FPS average, and High is a marginal choice at 1440p and 4K where it fails to hit the 60 FPS threshold at the latter.

GPU Role

The NVIDIA GeForce RTX 5090, with its 32 GB of GDDR7 memory on a 512-bit bus providing 1.79 TB/s bandwidth, is the dominant component in this pairing for Palworld’s frame rate output. The GPU’s base clock of 2017 MHz and boost clock of 2407 MHz, combined with 21760 shading units, deliver raw rasterization power that the benchmark data reflects. The measured FPS scaling from 1080p to 4K shows a predictable decline: at Medium settings, the average drops from 212 FPS at 1080p to 139 FPS at 1440p (a 34% reduction) and then to 77 FPS at 4K (a 45% reduction from 1440p). This pattern indicates that the GPU is the primary bottleneck at higher resolutions, as the frame rate drops proportionally with the increase in pixel count. The 32 GB VRAM capacity is far beyond what Palworld requires, but the bandwidth ensures that texture streaming and asset loading do not introduce stutter, as evidenced by the consistent minimum FPS values at Medium settings (180 at 1080p, 118 at 1440p, 66 at 4K). The RTX 5090’s percentile ranking of 92 among all GPUs, with an average benchmark score of 79842, places it in the top tier, and its nearest rivals—the Tesla P100 variants and RX 6850M XT—are all within 1.4% of its score, confirming that this GPU is not the limiting factor in this combo. At 1080p Low, the 261 FPS average suggests the GPU is underutilized, as the frame rate exceeds what most displays can show, but this is a ceiling imposed by the game engine rather than the hardware.

CPU Role

The Intel Core Ultra X9 388H, a 16-core, 16-thread Panther Lake processor with a boost clock of 5.10 GHz, plays a supporting role in this configuration, as Palworld’s engine appears to scale primarily with GPU throughput. The CPU’s benchmark scores—18911 in Cinebench R23 multi-core and 2200.5 in single-core—and its 88th percentile ranking among all CPUs indicate strong all-around performance, but the measured FPS data shows that it does not bottleneck the RTX 5090 at any resolution. At 1080p, where CPU overhead is most likely to surface, the Low preset achieves 261 FPS, which is a 23% increase over Medium’s 212 FPS, suggesting that the CPU can feed the GPU with frames even at very high rates. However, the CPU’s 16 threads (matching its core count, with no hyperthreading) and 18 MB of shared L3 cache may limit performance in heavily populated areas of Palworld, though the data does not include separate CPU-bound scenarios. The nearest CPU rivals—AMD Ryzen 5 7500X3D (-0.2%), Intel Core i9-13950HX (+0.3%), AMD Ryzen AI Max 385 (+0.4%), and Intel Core i5-13600 (+0.5%)—are all within 0.5% of the Ultra X9 388H’s average benchmark score of 44466, indicating that this CPU is not a differentiator in frame rate. The 2.10 GHz base clock and 25 W TDP suggest a power-efficient design, but the boost clock of 5.10 GHz provides the single-thread headroom that Palworld’s game logic may require. The data shows that at 4K, the FPS gap between Low (95) and Ultra (45) is larger than at 1080p, confirming that the GPU is the primary constraint at higher resolutions, while the CPU maintains adequate performance headroom throughout.

How This Combo Ranks

The combination of the Intel Core Ultra X9 388H and NVIDIA GeForce RTX 5090 ranks 586th out of 2944 tested combos in Palworld, placing it in the top 20% of all configurations. This rank reflects the GPU’s strong overall performance, as the RTX 5090’s 92nd percentile GPU ranking is higher than the CPU’s 88th percentile, indicating that the combo’s position is buoyed by the graphics card. The combo rank of 586 out of 2944 means that 2358 other combinations outperform it, which may seem counterintuitive given the RTX 5090’s flagship status, but this is likely due to the CPU’s mobile segment positioning—the Ultra X9 388H is designed for laptops (Intel BGA 2540 socket, 25 W TDP), while many higher-ranked combos may pair the same GPU with desktop-class CPUs. The data does not provide direct comparisons to other combos in Palworld, but the CPU’s nearest rivals all have similar average benchmark scores (within 0.5%), suggesting that swapping the CPU for an AMD Ryzen 5 7500X3D or Intel Core i9-13950HX would yield negligible FPS differences. The combo’s rank indicates that it is a high-performing configuration, but not the absolute top tier, which is consistent with the CPU’s 88th percentile ranking. For Palworld specifically, the measured FPS figures at Medium settings (212 at 1080p, 139 at 1440p, 77 at 4K) are well above playable thresholds, so the rank of 586 does not reflect a poor experience—it simply shows that there are faster combinations available, likely with more powerful desktop CPUs.

Resolution Scaling

The resolution scaling data reveals a clear GPU-bound pattern across all settings presets. At Medium settings, the average FPS drops from 212 at 1080p to 139 at 1440p, a 34% decrease, and then to 77 at 4K, a further 45% decrease from 1440p. This non-linear scaling is typical of a GPU that becomes increasingly saturated as pixel count rises. At Low settings, the scaling is steeper: 261 FPS at 1080p, 172 at 1440p (34% drop), and 95 at 4K (45% drop from 1440p), which suggests that even at the lowest settings, the GPU is still the limiting factor, as the CPU has ample headroom to feed frames. The High preset shows a similar pattern: 163 FPS at 1080p, 107 at 1440p (34% drop), and 59 at 4K (45% drop). The Ultra preset, however, shows a more dramatic drop from 1440p to 4K: 123 FPS at 1080p, 81 at 1440p (34% drop), and 45 at 4K (44% drop from 1440p). The consistent 34% drop from 1080p to 1440p and 45% drop from 1440p to 4K across all settings indicates that Palworld’s rendering load scales linearly with resolution, and the RTX 5090’s 32 GB VRAM and 1.79 TB/s bandwidth are sufficient to avoid memory bandwidth bottlenecks, as the frame rate drops are proportional to pixel count rather than stalling. The limiting component is unambiguously the GPU, as the CPU’s performance remains constant across resolutions and the FPS decline tracks the increasing pixel workload. At 4K, only Medium (77 FPS) and Low (95 FPS) achieve playable frame rates above 60 FPS, while High (59 FPS) and Ultra (45 FPS) fall below, confirming that resolution scaling is the primary determinant of performance in this game.

FAQ

Q: What is the best settings preset for 4K gameplay with this combo?

A: The Medium preset provides the best 4K experience, achieving 77 FPS average with a minimum of 66 FPS. Low settings reach 95 FPS, but Medium offers a significant visual upgrade while staying above 60 FPS. High (59 FPS) and Ultra (45 FPS) both dip below the 60 FPS threshold.

Q: How does the RTX 5090 perform relative to its nearest rivals in synthetic benchmarks?

A: The RTX 5090 has an average benchmark score of 79842, which is 0.3% higher than the Tesla P100 PCIe 16 GB (79605), 0.6% higher than the Tesla P100 PCIe 12 GB (79396), and 1.1% higher than the AMD Radeon RX 6850M XT (78940). It is 1.4% lower than the AMD Radeon Pro Vega 64X (80959).

Q: Does the CPU bottleneck the GPU in this game?

A: No, the data shows the CPU is not a bottleneck. At 1080p Low, the combo achieves 261 FPS, which is a 23% increase over Medium’s 212 FPS, indicating the CPU can feed the GPU with frames even at high rates. The FPS scaling from 1080p to 4K is consistent with GPU-bound behavior.

Q: What is the frame rate difference between Low and Ultra settings at 1440p?

A: At 2560x1440, Low settings achieve 172 FPS average, while Ultra settings achieve 81 FPS average. This represents a 53% reduction in frame rate when moving from Low to Ultra, with Medium (139 FPS) and High (107 FPS) falling in between.

Q: How does the Intel Core Ultra X9 388H compare to its nearest rival in CPU benchmarks?

A: The Ultra X9 388H has an average benchmark score of 44466, which is 0.2% higher than the AMD Ryzen 5 7500X3D (44573, deltaPct -0.2), 0.3% lower than the Intel Core i9-13950HX (44342, deltaPct 0.3), 0.4% lower than the AMD Ryzen AI Max 385 (44309, deltaPct 0.4), and 0.5% lower than the Intel Core i5-13600 (44240, deltaPct 0.5).

Q: What is the minimum FPS recorded for the Medium preset at 1080p?

A: The Medium preset at 1920x1080 has a minimum FPS of 180, with a maximum of 243 and an average of 212. This indicates strong frame pacing consistency, as the minimum is only 15% below the average.

Measured FPS Breakdown

The following table details the exact measured FPS values for all resolution and settings combinations:

| Resolution | Settings | Avg FPS | Min FPS | Max FPS |

|------------|----------|---------|---------|---------|

| 3840x2160 | High | 59 | — | — |

| 3840x2160 | Low | 95 | — | — |

| 3840x2160 | Medium | 77 | 66 | 89 |

| 3840x2160 | Ultra | 45 | — | — |

| 2560x1440 | High | 107 | — | — |

| 2560x1440 | Low | 172 | — | — |

| 2560x1440 | Medium | 139 | 118 | 160 |

| 2560x1440 | Ultra | 81 | — | — |

| 1920x1080 | High | 163 | — | — |

| 1920x1080 | Low | 261 | — | — |

| 1920x1080 | Medium | 212 | 180 | 243 |

| 1920x1080 | Ultra | 123 | — | — |

At 1920x1080, the frame rate spread from Low to Ultra spans 138 FPS (261 to 123), with Medium and High occupying the middle ground. The Medium preset’s minimum FPS of 180 is within 31% of the Ultra’s average (123), demonstrating that Medium provides a high floor for gameplay. At 2560x1440, the spread narrows to 91 FPS (172 to 81), and Medium’s minimum of 118 is 46% higher than Ultra’s average, reinforcing Medium as the balanced choice. At 3840x2160, the spread is 50 FPS (95 to 45), and only Medium (77 FPS, min 66) and Low (95 FPS) maintain averages above 60 FPS. The data shows that the RTX 5090’s performance scales predictably with settings, with Ultra consuming roughly 47% of the frame rate available at Low across all resolutions, while Medium preserves about 81% of Low’s frame rate at 1080p (212/261), 81% at 1440p (139/172), and 81% at 4K (77/95). This consistent ratio indicates that the Medium preset offers a uniform visual-to-performance trade-off that is independent of resolution.

Hardware Specifications

Intel Core Ultra X9 388H

Cores / Threads 16 / 16
Base Clock 2100 MHz
Boost Clock 5100 MHz
TDP 25W
Socket Intel BGA 2540
View Full CPU Details →

NVIDIA GeForce RTX 5090

VRAM 32 GB GDDR7
Base Clock —
Boost Clock 2407 MHz MHz
TDP 575 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core Ultra X9 388H + NVIDIA GeForce RTX 5090 in Palworld

Resolution Settings Avg FPS
3840x2160 Ultra 67.0
3840x2160 High 89.0
3840x2160 Medium 114.0
3840x2160 Low 142.0
2560x1440 Ultra 120.0
2560x1440 High 160.0
2560x1440 Medium 207.0
2560x1440 Low 256.0
1920x1080 Ultra 183.0
1920x1080 High 242.0
1920x1080 Medium 313.0
1920x1080 Low 382.0

Palworld with iUltra X9 388H + Other GPUs

See how Palworld performs with the same CPU but different graphics cards.

Palworld with RTX 5090 + Other CPUs

See how Palworld performs with the same GPU but different processors.

Other Games with iUltra X9 388H + RTX 5090

Explore FPS benchmarks for other games using this same hardware combination.