Palworld

Palworld

AVERAGE FPS
58
playable

This combination offers playable performance with an average of 58 FPS, though you may want to lower settings for smoother gameplay.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 23 28 36 46
1440p QHD 39 48 60 77
1080p Full HD 57 72 95 116

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 46
3840x2160 Medium 36
3840x2160 High 28
3840x2160 Ultra 23
2560x1440 Low 77
2560x1440 Medium 60
2560x1440 High 48
2560x1440 Ultra 39
1920x1080 Low 116
1920x1080 Medium 95
1920x1080 High 72
1920x1080 Ultra 57

Palworld with Intel Core i5-13400F + NVIDIA GeForce GTX 1660 SUPER, In-Depth Analysis

The data for Palworld on the Intel Core i5-13400F and NVIDIA GeForce GTX 1660 SUPER shows a system that is clearly bound by the graphics card at higher resolutions, but the picture is more nuanced at 1080p. The most striking observation is the massive performance spread between the Low and Ultra presets across all resolutions, which indicates a heavy graphics workload. At 1080p, the Low preset delivers 116.1 FPS, while Ultra drops to 56.5 FPS. This gap of nearly 60 FPS demonstrates that the GTX 1660 SUPER is the primary bottleneck when visual fidelity is maximized, but the CPU still has enough headroom to push high frame rates when the load is lightened.

Resolution Scaling

The FPS degradation from 1080p to 4K is steep and consistent, confirming that the GTX 1660 SUPER is the limiting component in this configuration. At High settings, the average frame rate falls from 71.7 FPS at 1920x1080 to 48.2 FPS at 2560x1440, a 32.8% drop. Moving to 3840x2160, the average plummets to 27.7 FPS, which is a 61.4% reduction from the 1080p figure. This pattern is typical of a GPU with a 192-bit memory bus and 6 GB of VRAM, where pixel throughput and memory bandwidth are stretched thin at higher resolutions.

The scaling from 1440p to 4K is even more punishing. On Low settings, the frame rate drops from 77.2 FPS at 1440p to 46.2 FPS at 4K, a 40.2% loss. On Medium, the drop is from 60.2 FPS to 35.8 FPS, a 40.5% loss. This indicates that the GPU is hitting a hard computational wall at 4K, likely due to the TU116 chip’s 1408 shading units and 48 ROPs being insufficient for the pixel count. The data suggests that 4K is not a practical target for this combo, even at the lowest settings, where the 46.2 FPS average is barely acceptable for slower-paced exploration.

At 1080p, the scaling is more forgiving. The Low preset’s 116.1 FPS shows the CPU can feed the GPU well, but the Ultra preset’s 56.5 FPS reveals the GPU’s limits under heavy load. The fact that 1080p Ultra (56.5 FPS) is nearly identical to 1440p High (48.2 FPS) in performance distance suggests that the GPU is the constant bottleneck, regardless of resolution, when settings are high.

GPU Role

The GTX 1660 SUPER is built on the Turing architecture and uses a TU116 chip manufactured on a 12 nm process at TSMC. It has 6 GB of GDDR6 memory on a 192-bit bus, providing 336.0 GB/s of bandwidth. This memory configuration is a major factor in Palworld’s performance, as the game’s open-world environments and numerous on-screen objects can quickly consume VRAM. At 4K Ultra, the 22.7 FPS average is likely a combination of pixel throughput limits and memory pressure, as 6 GB is a modest amount for that resolution.

The GPU’s clock speeds are 1530 MHz base and 1785 MHz boost, with memory running at 1750 MHz (14 Gbps effective). The boost clock is respectable for a card of this class, but it cannot compensate for the raw compute limitations. The FP32 performance is 5.027 TFLOPS, which is adequate for 1080p gaming but falls short at higher resolutions. The pixel rate of 85.68 GPixel/s and texture rate of 157.1 GTexel/s are the theoretical limits for the 48 ROPs and 88 TMUs, and Palworld’s textured terrain and lighting effects push these units hard.

The GPU’s benchmark scores place it at the 55th percentile among all GPUs, with an average benchmark score of 14286. Its nearest rival is the AMD Radeon RX Vega 11, which scores 14314 and is 0.2% faster. The Intel Iris Xe MAX Graphics is also within 0.2%, scoring 14315. This proximity in synthetic benchmarks does not translate to identical gaming performance, but it confirms that the GTX 1660 SUPER is positioned in the mid-range tier. The 3DMark Steel Nomad DX12 score of 1278 is a low figure, indicating that the card struggles with modern API workloads, which may explain the poor 4K results in Palworld.

FAQ

Q: Can this system run Palworld at 4K with playable frame rates?

A: No. At 4K, the highest average FPS is 46.2 on Low settings, which is playable but not smooth. High settings yield 27.7 FPS, and Ultra drops to 22.7 FPS, both of which are below the generally accepted 30 FPS threshold for immersive play.

Q: What is the best resolution for a balance of quality and performance?

A: 2560x1440 on Medium settings provides 60.2 FPS, which is smooth and looks noticeably better than 1080p. If you need higher frame rates, 1080p High at 71.7 FPS is a solid alternative.

Q: Is the CPU or GPU the bottleneck in this game?

A: The GPU is the limiting factor. The CPU’s 10 cores and 16 threads provide ample processing power, as evidenced by the 116.1 FPS at 1080p Low. The FPS drops are directly correlated with increased GPU load from higher resolutions and settings.

Q: How does the GTX 1660 SUPER compare to its closest rivals in synthetic benchmarks?

A: The GPU has an average benchmark score of 14286, placing it at the 55th percentile. Its nearest rival, the AMD Radeon RX Vega 11, scores 14314, which is 0.2% higher. The AMD Radeon RX 5500 XT scores 14389, which is 0.7% higher.

Q: Does the 6 GB VRAM limit performance in Palworld?

A: Yes, particularly at higher resolutions. The 6 GB GDDR6 memory is sufficient for 1080p, but at 4K, the memory bandwidth of 336.0 GB/s and capacity are likely insufficient, contributing to the low average FPS figures.

Q: What is the performance difference between Low and Ultra settings at 1080p?

A: The Low preset averages 116.1 FPS, while Ultra averages 56.5 FPS. This is a 59.6 FPS difference, indicating that the Ultra preset’s added graphical effects heavily tax the GPU.

Settings Recommendations

For a smooth experience, the 1080p Medium preset offers the best balance, delivering 95.3 FPS. This is well above the 60 FPS target, and the visual improvement over Low is substantial. If you own a 1440p monitor, Medium settings at 60.2 FPS is the recommended starting point; you can adjust individual options to maintain this frame rate. The High preset at 1440p (48.2 FPS) is acceptable for slower gameplay, but it may feel sluggish during combat with multiple Pals on screen.

Avoid Ultra settings unless you are playing at 1080p and prioritize visuals over frame rate. The 56.5 FPS average at 1080p Ultra is playable, but the 22.7 FPS at 4K Ultra is not. For 4K, the Low preset’s 46.2 FPS is the only viable option, and even then, you should expect occasional dips below 40 FPS in dense areas. The data does not show a minimum FPS, so these averages may not reflect worst-case scenarios.

Measured FPS Breakdown

At 1920x1080, the full range of presets is usable. Low averages 116.1 FPS, Medium averages 95.3 FPS, High averages 71.7 FPS, and Ultra averages 56.5 FPS. The gap between Medium and High is 23.6 FPS, which is significant, suggesting that High enables several costly effects. The drop from High to Ultra is 15.2 FPS, indicating diminishing returns from the highest preset.

At 2560x1440, the performance tier shifts down. Low averages 77.2 FPS, Medium averages 60.2 FPS, High averages 48.2 FPS, and Ultra averages 38.5 FPS. The Medium preset is the only one that consistently stays above 60 FPS. The difference between Low and Medium is 17 FPS, which is smaller than at 1080p, indicating that the GPU is becoming more of a bottleneck as resolution increases. High at 48.2 FPS is borderline, and Ultra at 38.5 FPS will feel choppy.

At 3840x2160, the card is overwhelmed. Low averages 46.2 FPS, Medium averages 35.8 FPS, High averages 27.7 FPS, and Ultra averages 22.7 FPS. No preset achieves 60 FPS, and only Low nears acceptable playability. The scaling from Low to Medium is a 10.4 FPS drop, and from Medium to High is an 8.1 FPS drop. Ultra is essentially a slideshow, with a 5 FPS reduction from High. This resolution is not recommended for this hardware.

CPU Role

The Intel Core i5-13400F is a 10-core, 16-thread processor from the Raptor Lake architecture, with a base clock of 2.50 GHz and a boost clock of 4.60 GHz. It has 20 MB of shared L3 cache and supports DDR4 and DDR5 memory. In Palworld, this CPU is not the limiting factor. The benchmark data shows that at 1080p Low, the system achieves 116.1 FPS, which is a high frame rate that indicates the CPU can handle the game’s simulation and physics workloads without issue.

The CPU’s percentile rank is 82, with an average benchmark score of 25236. Its nearest rival is the Intel Core i7-13620H, which scores 25201 and is 0.1% slower. The AMD Ryzen 5 5600X3D scores 25365, which is 0.5% faster. These differences are negligible in real-world gaming. The Cinebench R23 multicore score of 21279 and singlecore score of 3004 demonstrate strong all-around performance, which is more than sufficient for Palworld’s CPU demands.

The 3DMark multithreaded scores show scaling from 1880 with 2 threads to 7307 with max threads, indicating good utilization of its 16 threads. This is important for a survival game like Palworld, where multiple systems (AI, world simulation, player interactions) run concurrently. The data suggests that the CPU can deliver high frame rates at 1080p Low, but the GPU limits performance at higher settings. For this combo, the i5-13400F provides a solid foundation, but the GTX 1660 SUPER is the component to upgrade for better Palworld performance.

Hardware Specifications

Intel Core i5-13400F

Cores / Threads 10 / 16
Base Clock 2500 MHz
Boost Clock 4600 MHz
TDP 65W
Socket Intel Socket 1700
View Full CPU Details →

NVIDIA GeForce GTX 1660 SUPER

VRAM 6 GB GDDR6
Base Clock —
Boost Clock 1785 MHz MHz
TDP 125 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core i5-13400F + NVIDIA GeForce GTX 1660 SUPER in Palworld

Resolution Settings Avg FPS
3840x2160 Low 46.2
3840x2160 Medium 35.8
3840x2160 High 27.7
3840x2160 Ultra 22.7
2560x1440 Low 77.2
2560x1440 Medium 60.2
2560x1440 High 48.2
2560x1440 Ultra 38.5
1920x1080 Low 116.1
1920x1080 Medium 95.3
1920x1080 High 71.7
1920x1080 Ultra 56.5

Palworld with ii5-13400F + Other GPUs

See how Palworld performs with the same CPU but different graphics cards.

Palworld with GTX 1660 SUPER + Other CPUs

See how Palworld performs with the same GPU but different processors.

Other Games with ii5-13400F + GTX 1660 SUPER

Explore FPS benchmarks for other games using this same hardware combination.