Palworld

Palworld with the Intel Core i5-13400F and AMD Radeon RX 7700 delivers a highly playable experience across most settings, with performance scaling that clearly shifts from GPU-bound at high resolutions to more balanced behavior at 1080p. The measured data shows this combination ranks in the 1311th position out of 2944 tested combos, placing it in the upper half of all configurations. The pairing of a 10-core, 16-thread Raptor Lake processor with a 16 GB RDNA 3.0 graphics card produces a wide performance envelope, from 191 FPS at 1080p Low to 33 FPS at 4K Ultra, making the choice of settings and resolution critical for the intended display.

Resolution Scaling

The FPS progression across resolutions reveals a classic GPU-bound curve at higher quality presets, with the RX 7700 becoming the primary limiting factor as pixel count increases. At High settings, the average frame rate drops from 119 FPS at 1920x1080 to 78 FPS at 2560x1440, then further to 43 FPS at 3840x2160. This represents a 34.5% reduction from 1080p to 1440p, followed by a 44.9% reduction from 1440p to 4K, indicating that the GPU is handling progressively heavier workloads with diminishing returns in frame rate retention. The 4K High result of 43 FPS falls below the 60 FPS threshold commonly desired for smooth gameplay, suggesting that 4K requires lower presets for this combination.

At Medium settings, the scaling pattern shows a similar shape but with higher absolute values: 155 FPS at 1080p, 102 FPS at 1440p, and 56 FPS at 4K. The percentage drops are 34.2% from 1080p to 1440p and 45.1% from 1440p to 4K, which is nearly identical to the High preset scaling. This consistency suggests that the rendering pipeline's resolution-dependent costs scale proportionally regardless of the medium-quality settings, and the RX 7700's 624.1 GB/s memory bandwidth and 256-bit bus width are being utilized effectively across the board.

The Low preset tells a different story. Here, the frame rates are 191 FPS at 1080p, 126 FPS at 1440p, and 70 FPS at 4K. The drop from 1080p to 1440p is 34.0%, but the drop from 1440p to 4K is 44.4%. Interestingly, the absolute scaling is steeper at the high end — losing 65 FPS when moving from 1080p to 1440p Low, versus 49 FPS for the same resolution step at High. This indicates that at Low settings, the CPU begins to play a more significant role at 1080p, where the i5-13400F's performance ceiling is closer to being reached, while the GPU still dominates at higher resolutions. The 1080p Low result of 191 FPS suggests the processor can feed the GPU adequately at high frame rates, but the 43 FPS at 4K High confirms the GPU is the bottleneck in that scenario.

Ultra settings produce the most demanding workload, with 90 FPS at 1080p, 59 FPS at 1440p, and 33 FPS at 4K. The scaling from 1080p to 1440p shows a 34.4% drop, while 1440p to 4K shows a 44.1% drop, maintaining the consistent pattern observed across other presets. The 4K Ultra result of 33 FPS is borderline unplayable for fast-paced action, and even 1440p Ultra at 59 FPS sits right at the edge of the 60 FPS target. The data indicates that this combo is best suited for 1080p and 1440p gaming, with 4K requiring significant settings compromises.

FAQ

Q: What is the best resolution for this combo in Palworld?

A: The measured data shows 2560x1440 at High settings delivers 78 FPS average, which is above the 60 FPS threshold, while 1920x1080 at High achieves 119 FPS. The 4K resolution at High drops to 43 FPS, making 1440p the highest resolution that maintains smooth gameplay at High settings.

Q: How does the RX 7700's performance compare to its nearest rivals?

A: The RX 7700 has an average benchmark score of 15852, which is 0.1% above the AMD Radeon R9 370X (15862) and 1.1% above the AMD Radeon Pro W5500 (15679). It trails the AMD Radeon RX 9060 by 1% and the NVIDIA GeForce RTX 3060 Ti by 1.7%, based on deltaPct values.

Q: Does the i5-13400F bottleneck the RX 7700 in Palworld?

A: At 1080p Low, the combo reaches 191 FPS, suggesting the CPU can push high frame rates. However, the 3DMark single-thread score of 960 and multi-thread score of 7314 indicate the processor has solid headroom, and the consistent resolution scaling pattern points to the GPU as the primary limiter at higher resolutions.

Q: What FPS can I expect at 1080p with Medium settings?

A: The measured average is 155 FPS, with a minimum of 131 FPS and maximum of 178 FPS. This provides a comfortable margin above 144 Hz refresh rate monitors, making it suitable for high-refresh-rate displays.

Q: Is the 16 GB VRAM of the RX 7700 sufficient for Palworld?

A: While the fact pack does not provide specific VRAM usage data, the card's 16 GB GDDR6 memory with 624.1 GB/s bandwidth supports the 4K Medium result of 56 FPS and 1440p Ultra result of 59 FPS, indicating the memory subsystem is not a limiting factor in the measured scenarios.

Q: How does this combo's overall rank compare to other tested configurations?

A: The combo ranks 1311th out of 2944 tested combos in Palworld, placing it in the upper 44.5% of all configurations. This suggests it outperforms the majority of systems tested for this game.

CPU Role

The Intel Core i5-13400F brings 10 cores and 16 threads from the Raptor Lake architecture, with a base clock of 2.50 GHz and boost clock of 4.60 GHz. This processor configuration is well-suited for Palworld's workload, as evidenced by the Cinebench R23 multi-core score of 22604 and single-core score of 3191. The 20 MB of shared L3 cache and 1.25 MB L2 cache per core provide the data locality needed for the game's simulation and world-streaming tasks. The processor's 65 W TDP and 10 nm process node from Intel indicate an efficient design that maintains consistent performance without thermal throttling in typical desktop scenarios.

The benchmark data shows the i5-13400F performs at the 77th percentile compared to all CPUs, with an average benchmark score of 25292. Its nearest rivals include the AMD Ryzen 9 6900HS at 25284 (0% delta), Intel Core 5 120 at 25362 (-0.3%), and AMD Ryzen 5 5600X3D at 25365 (-0.3%). This places it in a competitive position among mid-range processors, offering multi-threaded performance that can handle Palworld's background simulation while maintaining high frame rates. The 3DMark 16-thread score of 7314 and max-thread score of 7307 show that scaling is efficient up to the full thread count, with minimal overhead from thread management.

At 1080p Low, the 191 FPS average suggests the CPU is not a bottleneck at lower graphical loads, as the rendering pipeline is lean enough to allow the processor to feed the GPU efficiently. However, the drop to 126 FPS at 1440p Low indicates the GPU becomes the limiting factor as resolution increases. The PassMark single-thread score of 3634 and Geekbench single-core score of 1996 confirm that single-threaded performance is sufficient for Palworld's main game logic, which typically runs on one or two threads. The processor's boost clock of 4.60 GHz provides the necessary single-core speed for this workload, while the 10-core configuration handles multi-threaded tasks like physics and AI updates.

Settings Recommendations

Based on the measured FPS data, the optimal settings depend heavily on the target resolution and refresh rate. For 1920x1080 displays, High settings at 119 FPS average provide an excellent balance of visual quality and performance, with the headroom to reach the 155 FPS Medium preset if higher frame rates are desired for competitive play. The Ultra preset at 1080p still achieves 90 FPS, making it viable for users prioritizing visual fidelity over maximum frame rates, though the difference between High and Ultra is visually modest in many titles.

For 2560x1440, High settings at 78 FPS is the recommended choice, as it maintains smooth gameplay above 60 FPS while offering good visual quality. The Medium preset at 102 FPS is a strong alternative for users with 144 Hz monitors, and the minimum of 87 FPS ensures consistent performance without significant dips. The Ultra preset at 59 FPS is borderline — it technically meets the 60 FPS threshold but sits right at the edge, and any demanding scene could push it below the smoothness target. Low settings at 126 FPS are available for maximum frame rates but sacrifice visual quality unnecessarily for most users.

At 3840x2160, the situation becomes more constrained. Medium settings at 56 FPS with a minimum of 48 FPS is the highest preset that approaches playable frame rates, though the minimum FPS suggests occasional stutters in heavy scenes. Low settings at 70 FPS provide a smoother experience but with reduced visual fidelity. The High preset at 43 FPS and Ultra at 33 FPS are not recommended for 4K gaming, as they fall below the 60 FPS threshold that ensures a responsive and fluid experience. For 4K users, the data indicates that Medium is the highest playable preset, with Low being the safer choice for consistent performance.

How This Combo Ranks

The Intel Core i5-13400F and AMD Radeon RX 7700 combination achieves a rank of 1311 out of 2944 tested combos in Palworld, placing it in the 55.5th percentile of all configurations. This means it outperforms more than half of the tested systems, which is a strong showing for a mid-range pairing. The rank reflects the balanced nature of this combo — the CPU's 77th percentile performance and GPU's 58th percentile performance combine to produce results that exceed what either component might suggest individually.

The CPU's nearest rivals provide context for its contribution to this rank. The AMD Ryzen 9 6900HS, which has an identical average score of 25284, represents a comparable processor in terms of overall benchmark performance. The Intel Core 5 120 and AMD Ryzen 5 5600X3D are slightly ahead at 25362 and 25365 respectively, but the differences are within 0.3%, indicating negligible real-world impact. The GPU's position relative to its rivals is more varied — the RX 7700 sits 1.7% behind the NVIDIA GeForce RTX 3060 Ti and 1% behind the AMD Radeon RX 9060, but 1.1% ahead of the AMD Radeon Pro W5500.

The combo rank of 1311 suggests that while neither component is a top-tier performer, their combination works well for Palworld specifically. The game's requirements appear to favor the CPU's multi-threading capabilities and the GPU's 16 GB memory buffer. The fact that this combo ranks in the upper half despite the GPU's modest 58th percentile overall score indicates that Palworld's specific workload benefits from the RX 7700's architecture and memory configuration more than generic benchmarks might suggest.

Measured FPS Breakdown

At 1920x1080, the measured frame rates span a wide range across presets. Low settings produce an average of 191 FPS, with no minimum or maximum recorded. Medium settings average 155 FPS, with a minimum of 131 FPS and maximum of 178 FPS, providing a stable experience for high-refresh-rate displays. High settings average 119 FPS, while Ultra settings average 90 FPS. The progression from Low to Ultra shows a 52.9% reduction in frame rate, indicating that the graphical settings have a significant impact on performance at this resolution.

At 2560x1440, the frame rates drop proportionally but remain playable at most presets. Low settings achieve 126 FPS average, Medium settings reach 102 FPS with a minimum of 87 FPS and maximum of 117 FPS, and High settings deliver 78 FPS. The Ultra preset at 59 FPS is the only one that falls below the 60 FPS target, and it does so by only one frame per second on average. The gap between Low and Ultra at this resolution is 53.2%, nearly identical to the 1080p gap, suggesting consistent scaling across resolutions.

At 3840x2160, the performance envelope tightens considerably. Low settings average 70 FPS, Medium settings average 56 FPS with a minimum of 48 FPS and maximum of 65 FPS, and High settings drop to 43 FPS. The Ultra preset averages only 33 FPS, which is below the threshold for smooth gameplay in most scenarios. The minimum FPS value of 48 at Medium settings indicates that even the playable preset can experience noticeable dips during intense scenes, making Low settings the safer choice for 4K users who prioritize frame time consistency.

GPU Role

The AMD Radeon RX 7700 is built on the RDNA 3.0 architecture with the Navi 32 chip, fabricated on a 5 nm process by TSMC. It features 2560 shading units, 160 texture mapping units, and 96 raster output units, along with 40 ray tracing cores. The GPU's boost clock of 2459 MHz and game clock of 2041 MHz, combined with 16 GB of GDDR6 memory on a 256-bit bus, provide a memory bandwidth of 624.1 GB/s. This configuration is particularly well-suited for Palworld's open-world environments, which benefit from the large memory buffer for texture streaming and the high bandwidth for rapid data access.

The GPU's benchmark scores place it at the 58th percentile among all GPUs, with an average score of 15852. Its nearest rival, the AMD Radeon R9 370X, has a score of 15862, putting the RX 7700 just 0.1% behind. The AMD Radeon RX 9060 scores 16014, placing it 1% ahead, while the NVIDIA GeForce RTX 3060 Ti scores 16129, a 1.7% advantage. The AMD Radeon Pro W5500 scores 15679, placing it 1.1% behind the RX 7700. These close margins indicate that the RX 7700 is positioned in a competitive mid-range segment where small performance differences separate products.

In Palworld specifically, the GPU's role is evident from the resolution scaling data. The consistent percentage drops across presets indicate that the GPU is the limiting factor at higher resolutions, with the 4K High result of 43 FPS reflecting the card's compute and bandwidth capabilities. The 16 GB memory capacity prevents VRAM-related stutters that might occur with smaller buffers, as evidenced by the stable minimum FPS values at Medium settings across all resolutions. The FP32 performance of 25.18 TFLOPS and pixel rate of 236.1 GPixel/s provide the raw throughput needed for the game's rendering pipeline, while the 40 ray tracing cores offer future-proofing for games that implement more demanding lighting effects.