Palworld

Palworld with an Intel Core i5-12400F and NVIDIA GeForce RTX 4070 Ti shows a clear pattern of GPU-bound scaling as resolution climbs, with the CPU headroom at 1080p becoming irrelevant by 4K. The data indicates a system that delivers high refresh rates at mainstream resolutions while maintaining playable, though not always ideal, frame rates at 4K Ultra.

Resolution Scaling

The frame rate progression from 1920x1080 to 3840x2160 reveals how the RTX 4070 Ti becomes the limiting factor as pixel count rises. At Low settings, the system produces 290.4 FPS at 1080p, dropping to 192.4 FPS at 1440p, and further to 106.2 FPS at 4K. That represents a 63.4% reduction in frame rate from 1080p to 4K, a steep decline that points squarely at the GPU struggling with the four-fold increase in pixel load.

The scaling pattern under High settings is even more telling. The system hits 183.9 FPS at 1080p, falls to 120.7 FPS at 1440p, and lands at 64.5 FPS at 4K. The gap between 1080p and 1440p is 34.4%, while the gap between 1440p and 4K is 46.6%. This non-linear degradation suggests that at 4K, the RTX 4070 Ti's 12 GB of GDDR6X memory and 192-bit bus are being pushed hard, with the 504.2 GB/s bandwidth becoming a bottleneck.

At Ultra settings, the resolution scaling is most punishing. The system manages 139 FPS at 1080p, 90.1 FPS at 1440p, and only 48.3 FPS at 4K. The 4K figure is barely above the 48 FPS threshold for smooth gameplay, indicating that Ultra settings at 4K are only viable for less demanding scenarios. Notably, the delta between Medium and High at 4K is 22.4 FPS, while the delta between High and Ultra is 16.2 FPS, showing diminishing returns as settings ramp up.

The CPU's role in this scaling is minimal. The i5-12400F, with its 6 cores and 12 threads, delivers a boost clock of 4.40 GHz and a Cinebench R23 multi-core score of 16518. At 1080p Low, the 290.4 FPS figure likely approaches the CPU's frame generation ceiling, but as resolution increases, the GPU takes over as the primary constraint. The data shows that 4K performance is almost entirely GPU-limited, with the CPU's 18 MB of shared L3 cache and dual-channel DDR4/DDR5 memory support providing ample headroom.

GPU Role

The RTX 4070 Ti's specifications directly explain its behavior in Palworld. With a base clock of 2310 MHz and a boost clock of 2610 MHz, the Ada Lovelace architecture GPU delivers 40.09 TFLOPS of FP32 performance. The 12 GB of GDDR6X memory on a 192-bit bus provides 504.2 GB/s of bandwidth, which is substantial but not exceptional for a high-end card. The 7680 shading units and 240 TMUs handle texture-heavy scenes well, but the 80 ROPs can become a limiting factor at high resolutions.

The GPU's 85th percentile ranking among all GPUs, based on an average benchmark score of 44900, places it comfortably above mainstream parts. Its nearest rival, the NVIDIA GeForce RTX 5090 Mobile, scores 45152 with a deltaPct of -0.6%, meaning the desktop RTX 4070 Ti is essentially on par with that mobile flagship. The Intel Arc A730M scores 45592 (-1.5%), while the AMD Radeon Pro 580 scores 44195 (+1.6%), showing the RTX 4070 Ti sits in a tight competitive band.

In Palworld specifically, the GPU's 12 GB VRAM capacity appears sufficient for all tested settings, as there are no signs of texture thrashing or memory-related stutters in the measured FPS data. The 21 Gbps effective memory speed allows for rapid data transfer, which helps maintain the 64.5 FPS average at 4K High. However, the drop to 48.3 FPS at 4K Ultra suggests that the GPU's raw compute power, rather than memory capacity, is the limiting factor.

The GPU's 285 W TDP and 600 W suggested PSU requirement indicate a power-hungry component, but the measured FPS numbers show it delivers consistent performance across all settings. The 5 nm process node from TSMC, with 35,800 million transistors on a 294 mm² die, provides efficiency that supports sustained boost clocks. The 60 RT cores and 240 tensor cores are present, though Palworld likely does not rely heavily on ray tracing, based on the available data.

How This Combo Ranks

The combination of the Intel Core i5-12400F and NVIDIA GeForce RTX 4070 Ti ranks 223rd out of 1718 tested combos in Palworld, placing it in the top 13% of all configurations. This ranking reflects a balanced pairing where neither component severely bottlenecks the other, though the CPU's 77th percentile ranking among all CPUs is notably lower than the GPU's 85th percentile.

The CPU's nearest rivals include the Intel Core i7-8700K with an average score of 19210 (deltaPct 0.1%), meaning the i5-12400F essentially matches that older flagship. The AMD Ryzen 5 7533HS scores 19364 (-0.7%), while the AMD EPYC 7773X scores 18979 (+1.3%). These small deltas indicate the i5-12400F is well within the performance envelope of its peers, despite having fewer cores than some server parts.

The combo's rank of 223 suggests that many higher-ranked configurations likely use more powerful CPUs or GPUs, but the data shows this pairing delivers strong results in Palworld. At 1080p, the system exceeds 139 FPS even at Ultra settings, which is well above the 60 FPS target for most displays. At 1440p, it maintains over 90 FPS at Ultra, making it suitable for high-refresh-rate monitors. The 4K results are more modest, but the 64.5 FPS at High settings is playable.

Measured FPS Breakdown

At 1920x1080, the system delivers its highest frame rates. Low settings produce 290.4 FPS, Medium yields 235.3 FPS, High reaches 183.9 FPS, and Ultra drops to 139 FPS. The scaling from Low to Ultra is a 52.1% reduction in frame rate, indicating that even at 1080p, the GPU is doing significant work. The jump from Low to Medium is 55.1 FPS, while Medium to High is 51.4 FPS, and High to Ultra is 44.9 FPS, showing a consistent performance cost for each settings tier.

At 2560x1440, the system remains highly capable. Low settings hit 192.4 FPS, Medium reaches 156.5 FPS, High manages 120.7 FPS, and Ultra drops to 90.1 FPS. The 1440p results show that the RTX 4070 Ti can comfortably handle high refresh rates at this resolution, with even Ultra settings staying above 90 FPS. The reduction from 1080p to 1440p is roughly 33% across all settings, which aligns with the 77% increase in pixel count.

At 3840x2160, the system becomes more constrained. Low settings produce 106.2 FPS, Medium reaches 86.9 FPS, High drops to 64.5 FPS, and Ultra falls to 48.3 FPS. The 4K results show that the GPU is the primary bottleneck, as the CPU's performance headroom is no longer relevant. The difference between Low and Ultra at 4K is 57.9 FPS, a much larger absolute gap than at 1080p, emphasizing the GPU's workload at high resolution.

FAQ

Q: What is the best resolution for this combo in Palworld?

A: Based on measured FPS, 2560x1440 offers the best balance, with High settings at 120.7 FPS and Ultra at 90.1 FPS. At 1080p, the system exceeds 139 FPS even at Ultra, but the 1440p results provide higher visual fidelity without sacrificing smoothness.

Q: How does the RTX 4070 Ti compare to its nearest GPU rival?

A: The RTX 4070 Ti scores 44900 on average benchmarks, while the NVIDIA GeForce RTX 5090 Mobile scores 45152 with a deltaPct of -0.6%, indicating the desktop card is essentially tied with that mobile part. The Intel Arc A730M scores 45592 (-1.5%), and the AMD Radeon Pro 580 scores 44195 (+1.6%).

Q: Is the i5-12400F a bottleneck for the RTX 4070 Ti?

A: The CPU's 77th percentile ranking and 16518 Cinebench R23 multi-core score suggest it is not a significant bottleneck. At 1080p Low, the 290.4 FPS may approach CPU limits, but at 1440p and 4K, the GPU becomes the limiting factor, as shown by the steep FPS drops.

Q: What settings should I use for 4K gameplay?

A: At 4K, High settings produce 64.5 FPS, which is playable. Ultra drops to 48.3 FPS, which may feel less smooth. Medium settings at 86.9 FPS offer a better balance of visual quality and performance for 4K displays.

Q: How does the combo rank relative to all tested configurations?

A: The combo ranks 223rd out of 1718 tested combos in Palworld, placing it in the top 13% of all configurations. This indicates a strong pairing that outperforms the vast majority of tested systems.

Q: Does the GPU's VRAM capacity affect performance in Palworld?

A: The 12 GB of GDDR6X memory appears sufficient for all tested settings, as the measured FPS shows no evidence of memory-related performance drops. The 504.2 GB/s bandwidth is more likely a limiting factor at 4K Ultra, where the GPU's compute power is stretched.