Palworld

Palworld is a demanding survival title, and the data for this specific pairing—the AMD Ryzen 9 5900X and NVIDIA GeForce RTX 2060—shows a system that is heavily constrained by its graphics card. The measured frame rates across the three resolutions and four quality presets tell a clear story: this is a 1080p-focused setup, with a steep performance cliff waiting at 1440p and beyond. The following analysis breaks down the measured results to show exactly where this combo stands.

Resolution Scaling

The most striking pattern in the data is the severe drop in performance as resolution increases, which points directly at the RTX 2060 as the limiting factor. At 1080p with Low settings, the combo delivers an average of 138.9 FPS, which is a very playable number for a fast-paced action game. Moving to 1440p at the same Low preset drops that average to 92.9 FPS, a reduction of 46 FPS. The jump to 4K at Low settings further collapses to 47.6 FPS, which is less than half of the 1080p figure.

This scaling behavior is typical of a GPU-bound scenario. The Ryzen 9 5900X, with its 12 cores and 24 threads, is not the bottleneck at these higher resolutions. The data suggests the CPU has headroom left on the table, as the frame rate is dictated almost entirely by the pixel-pushing capabilities of the 6 GB RTX 2060. The gap between 1080p and 1440p on Low settings is a 35% reduction in frame rate, and the gap between 1440p and 4K is a 49% reduction. These are massive swings that indicate the GPU is being overwhelmed by the increased pixel count.

The scaling becomes even more dramatic when looking at the Ultra preset. At 1080p, the system manages 64.1 FPS, which is borderline acceptable. At 1440p, it drops to 40.7 FPS, and at 4K, it falls off a cliff to 22.1 FPS. The difference between the 1080p Low and 1080p Ultra results is 74.8 FPS, showing that the settings have a bigger impact at lower resolutions where the GPU is less saturated. At 4K, the difference between Low and Ultra is only 25.5 FPS, because the GPU is already struggling to fill all those pixels regardless of the visual fidelity.

GPU Role

The NVIDIA GeForce RTX 2060 is the undisputed workhorse of this pairing, and its specifications directly explain the measured results. It carries 6 GB of GDDR6 memory on a 192-bit bus, providing 336.0 GB/s of bandwidth. With a base clock of 1365 MHz and a boost clock of 1680 MHz, it operates within a 160 W TDP. These are the specs of a card that was designed for 1080p gaming, and the benchmark data confirms that its role in this system is to handle that resolution effectively.

The GPU's memory configuration is a significant factor. The 6 GB frame buffer is likely a constraint at 4K with higher settings, where texture data and geometry can easily exceed that capacity. The data shows that at 4K Ultra, the average FPS is just 22.1, which is unplayable. Even at 4K High, the average is 33.6 FPS, which is below the threshold for smooth gameplay. This is not a CPU issue; it is the RTX 2060 running out of both compute throughput and memory bandwidth.

The GPU's benchmark scores also put its performance into perspective. It sits at the 58th percentile among all GPUs, with a Passmark G3D score of 14111. Its nearest rivals, such as the AMD Radeon RX 7600S and AMD Radeon Pro 5600M, are within a 1.7% margin of its average score, confirming that it is a mid-range performer. In Palworld specifically, the data shows that this card is only comfortable at 1080p, where it can hit a solid 87.5 FPS on High settings. The 1440p numbers are playable only on Low and Medium presets, while 4K is not a viable option for this hardware.

FAQ

Q: Can this combo handle 4K gaming in Palworld?

A: Not in a playable sense. The highest average at 4K is 47.6 FPS on Low settings. The Ultra preset only manages 22.1 FPS, and High sits at 33.6 FPS. These numbers are well below what is needed for a smooth experience.

Q: What is the best resolution for this system?

A: The data clearly shows 1920x1080 is the sweet spot. All four presets at this resolution produce playable frame rates, with Low at 138.9 FPS and Ultra at 64.1 FPS.

Q: Is the CPU or GPU the limiting factor in this game?

A: The GPU is the clear bottleneck. The frame rate drops dramatically with resolution, which is a classic sign of GPU limitation. The Ryzen 9 5900X is a high-end processor with a 90th percentile ranking, and it has more than enough power to feed the RTX 2060.

Q: How much of a performance difference is there between Low and Ultra settings at 1080p?

A: The gap is significant. The Low preset averages 138.9 FPS, while Ultra averages 64.1 FPS. That is a difference of 74.8 FPS, meaning you can nearly double your frame rate by dropping to the lowest settings.

Q: What is the performance gap between 1080p and 1440p on the High preset?

A: At 1080p High, the average is 87.5 FPS. At 1440p High, it drops to 55.4 FPS. This represents a 32.1 FPS loss, which is a substantial hit that moves the experience from very smooth to merely acceptable.

Q: How does the RTX 2060 compare to its immediate rivals in terms of raw benchmark scores?

A: The RTX 2060 has an average benchmark score of 16074. Its closest competitor, the AMD Radeon RX 7600S, scores 15996, which is 0.5% lower. The AMD Radeon Pro 5600M and Pro 5700 are 1.7% higher, scoring 16351.

Measured FPS Breakdown

The following table outlines the exact average FPS measurements for every resolution and settings combination in the data.

| Resolution | Settings | Average FPS |

| :--------- | :------- | :---------- |

| 3840x2160 (4K) | Ultra | 22.1 |

| 3840x2160 (4K) | High | 33.6 |

| 3840x2160 (4K) | Medium | 38.5 |

| 3840x2160 (4K) | Low | 47.6 |

| 2560x1440 (1440p) | Ultra | 40.7 |

| 2560x1440 (1440p) | High | 55.4 |

| 2560x1440 (1440p) | Medium | 76.9 |

| 2560x1440 (1440p) | Low | 92.9 |

| 1920x1080 (1080p) | Ultra | 64.1 |

| 1920x1080 (1080p) | High | 87.5 |

| 1920x1080 (1080p) | Medium | 113.2 |

| 1920x1080 (1080p) | Low | 138.9 |

The 1080p data is the most useful for this hardware. Low is for esports-level responsiveness, but even Medium and High offer excellent frame rates. The 1440p data is more mixed; Medium is the highest playable setting, but High and Ultra will require compromises. The 4K data is purely academic, as all settings are below the 60 FPS threshold for smooth gameplay.

How This Combo Ranks

In the grand scheme of tested configurations, this combination of the AMD Ryzen 9 5900X and NVIDIA GeForce RTX 2060 ranks 1433rd out of 1718 total combos for Palworld. This places it in the bottom 17% of all tested systems, which is a direct reflection of the GPU's limitations in this title. The CPU is not the problem; it is a top-tier processor that sits at the 90th percentile compared to all other CPUs. Its nearest rivals, like the Intel Core i7-13700F and AMD Ryzen 7 PRO 8845HS, are within a 1% margin of its average score, confirming its high-end status.

The low combo ranking is almost entirely due to the RTX 2060's position in the market. The GPU sits at the 58th percentile, and its average benchmark score of 16074 is only 0.5% higher than the AMD Radeon RX 7600S. This mid-range standing means that while the CPU can drive high frame rates in less demanding scenarios, the GPU holds the entire system back in a graphically intensive game like Palworld. The ranking is a clear indicator that this pairing is not balanced for high-refresh-rate or high-resolution gaming in this specific title.

Settings Recommendations

Given the measured data, the optimal experience for this combo is found at 1080p. The Medium preset at 1920x1080, averaging 113.2 FPS, provides the best balance between visual quality and performance. It is a significant improvement over the Low preset's 138.9 FPS in terms of fidelity, while still maintaining a frame rate that is far above the 60 FPS standard for smooth gameplay.

For players who prioritize a consistent high frame rate, the Low preset at 1080p is an excellent choice, delivering 138.9 FPS. If visual fidelity is more important than raw speed, the High preset at 87.5 FPS is still very acceptable. The Ultra preset at 1080p, at 64.1 FPS, is only recommended for users who are willing to accept a frame rate that is closer to the minimum threshold for comfortable play.

At 1440p, the Medium preset at 76.9 FPS is the only setting that offers a solid experience. The High preset at 55.4 FPS is playable but not ideal, and the Ultra preset at 40.7 FPS should be avoided. The 4K resolution is not recommended for this hardware at any setting, as even the best-case Low preset at 47.6 FPS fails to provide a smooth experience. In short, stick to 1080p for the best results, and use Medium settings as your default starting point.