Palworld
This combination provides smooth gameplay with an average of 74 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 26 | 35 | 45 | 55 |
| 1440p QHD | 47 | 62 | 81 | 100 |
| 1080p Full HD | 72 | 95 | 123 | 152 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Palworld with AMD Ryzen 7 9850X3D + NVIDIA GeForce RTX 2060 SUPER, In-Depth Analysis
Palworld’s measured performance with the AMD Ryzen 7 9850X3D and NVIDIA GeForce RTX 2060 SUPER reveals a system that is heavily constrained by the graphics card at higher resolutions, while the processor’s substantial cache and core resources provide ample headroom for lower-resolution play. The data set includes average FPS for four settings presets across three resolutions, with minimum and maximum values recorded only for the Medium preset. This combination ranks 2066 out of 2944 tested combos in this game, placing it in the lower-middle portion of the database, a position that reflects the GPU’s age relative to modern titles. The following analysis breaks down the scaling, component roles, and practical recommendations based strictly on the measured rows.
Resolution Scaling
The transition from 1920x1080 to 3840x2160 produces a severe performance drop across every settings preset, indicating that the RTX 2060 SUPER is the primary bottleneck as pixel count increases. At Low settings, the average FPS falls from 152 at 1080p to 55 at 4K, a reduction of 97 FPS or roughly 64%. This dramatic scaling curve is typical of a GPU that exhausts its fillrate and memory bandwidth quickly when the render target expands, and the 8 GB frame buffer becomes a limiting factor at 4K.
The Medium preset shows a similar pattern: 123 FPS at 1080p, 81 FPS at 1440p, and 45 FPS at 4K. The step from 1080p to 1440p costs 42 FPS, while the step from 1440p to 4K costs another 36 FPS, showing that the drop is not linear but accelerates with each resolution increase. The High preset follows suit, with 95 FPS at 1080p, 62 FPS at 1440p, and 35 FPS at 4K. The Ultra preset is the most punishing, starting at 72 FPS at 1080p, falling to 47 FPS at 1440p, and collapsing to 26 FPS at 4K, which is below playable thresholds for most users.
The scaling behavior across presets tells a clear story about the limiting component. At 1080p, the gap between Low (152 FPS) and Ultra (72 FPS) is 80 FPS, which suggests that the CPU can feed the GPU enough frames even at high settings. However, at 4K, the gap between Low (55 FPS) and Ultra (26 FPS) narrows to 29 FPS, indicating that the GPU is so saturated that even reducing settings yields diminishing returns. This is a classic sign of a GPU-bound scenario at high resolution, where the RTX 2060 SUPER’s compute and memory throughput cap the frame rate regardless of the CPU’s capability.
Data from the Medium preset’s minimum FPS values reinforces this analysis: at 1080p, the minimum is 105 FPS, which is still above the average of many other combinations at 4K. At 1440p, the minimum drops to 69 FPS, and at 4K it falls to 38 FPS. These minimums indicate that frame pacing remains relatively stable at lower resolutions, but at 4K the GPU’s limitations cause more pronounced dips, likely due to memory pressure and shader complexity.
GPU Role
The NVIDIA GeForce RTX 2060 SUPER is built on the Turing architecture with a TU106 chip, featuring 2176 shading units, 136 texture mapping units, and 64 ROPs. Its base clock is 1470 MHz with a boost clock of 1650 MHz, and it carries 8 GB of GDDR6 memory on a 256-bit bus, yielding a bandwidth of 448.0 GB/s. These specifications are modest by modern standards, and the benchmark results confirm that the GPU’s role in Palworld is to provide adequate performance at 1080p but to struggle as resolution increases.
The GPU’s percentile ranking versus all GPUs is 62, meaning it outperforms just over half of the database entries. Its average benchmark score is 18093, with nearest rivals including the NVIDIA GeForce RTX 3060 Mobile (18159, delta -0.4%), AMD Radeon Pro 5700 (18189, delta -0.5%), AMD Radeon RX 460 (18373, delta -1.5%), and Intel Arc A770M (18383, delta -1.6%). These deltas are all within 1.6% of the RTX 2060 SUPER, indicating that these cards are statistically equivalent in raw compute, though real-world game performance can vary due to drivers and memory configurations.
The 8 GB VRAM capacity is a critical factor in Palworld, which is an open-world survival game with large draw distances and many dynamic objects. At 1080p, the VRAM is likely sufficient, as evidenced by the 152 FPS average at Low settings. However, at 4K, the combination of higher resolution textures and increased geometry can exceed the 8 GB buffer, causing the GPU to spill into system memory, which would explain the steep drop to 55 FPS at Low and 26 FPS at Ultra. The memory clock of 1750 MHz (14 Gbps effective) is standard for the era, but the 448.0 GB/s bandwidth is not enough to sustain high frame rates at 4K in a game with continuous world streaming.
The GPU’s pixel rate of 105.6 GPixel/s and texture rate of 224.4 GTexel/s provide a theoretical ceiling that aligns with the measured results. At 1080p, the GPU can output 152 FPS at Low, which is near the practical limit for this fillrate. At 4K, the pixel count quadruples, and the pixel rate becomes a hard constraint, resulting in the 35 FPS average at High settings. The FP32 performance of 7.181 TFLOPS is sufficient for the game’s lighting and post-processing at lower resolutions, but it becomes a bottleneck at 4K Ultra, where the 26 FPS average suggests the GPU is fully saturated.
CPU Role
The AMD Ryzen 7 9850X3D is a 9000-series processor with 8 cores and 16 threads, based on the Zen 5 architecture (Granite Ridge) on a 4 nm process. Its base clock is 4.70 GHz with a boost clock of 5.60 GHz, and it features a large 96 MB shared L3 cache, which is a key asset for gaming workloads that rely on data locality. The CPU’s memory support is DDR5 with a dual-channel bus, delivering 89.6 GB/s of bandwidth, and it uses the AMD Socket AM5 platform with PCIe Gen 5 support.
The CPU’s benchmark scores are impressive: a Cinebench R23 multicore score of 22807 and a single-core score of 2228, with a Passmark multithread score of 41318 and a single-thread score of 4704. Its percentile versus all CPUs is 92, placing it in the top 8% of processors. Nearest rivals include the Intel Xeon Platinum 8260M (avg score 58323, delta 0.1%), Intel Xeon w5-2545 (58504, delta -0.2%), Intel Core i9-14900 (58115, delta 0.5%), and AMD Ryzen AI 9 HX 470 (58826, delta -0.7%). These deltas are within 0.7%, showing that the 9850X3D is competitive with high-end server and desktop parts in synthetic benchmarks.
In Palworld, the CPU’s role is to handle game logic, physics, and the simulation of the open world, which includes many AI-driven creatures and building mechanics. The 8 cores and 16 threads are more than sufficient for this title, and the 96 MB L3 cache helps reduce memory latency, which can improve frame pacing in complex scenes. The measured FPS at 1080p supports this: at Low settings, the average is 152 FPS, which is likely near the CPU’s frame generation limit for this game. The fact that the FPS drops to 123 FPS at Medium and 95 FPS at High at the same resolution suggests that the GPU is still the primary limiter, but the CPU is capable of delivering over 150 FPS without becoming a bottleneck.
The CPU’s boost clock of 5.60 GHz is high, and the base clock of 4.70 GHz ensures sustained performance under load. The TDP is 120 W, which is moderate for a high-end desktop part, and the processor has a single-thread Passmark score of 4704, indicating strong per-core performance. This is important for Palworld, which likely has a primary game thread that cannot be fully parallelized. The Cinebench R15 single-core score of 343 further confirms that the CPU’s single-thread capability is robust, allowing it to maintain high frame rates even when the GPU is under less pressure at 1080p.
Settings Recommendations
Based on the measured FPS rows, the optimal settings for this combination depend heavily on the target resolution. At 1920x1080, the High preset delivers an average of 95 FPS, which is very smooth for a survival game, and the Medium preset offers 123 FPS for those who prefer higher refresh rates. The Low preset at 152 FPS is only recommended for competitive play where maximum frame rate is prioritized over visual fidelity. The Ultra preset at 72 FPS is playable but may not be stable in dense areas, so High is the best balance of visual quality and performance at 1080p.
At 2560x1440, the Medium preset provides an average of 81 FPS, which is the recommended choice for a responsive experience, as the High preset drops to 62 FPS and the Low preset at 100 FPS sacrifices too much visual detail. The Ultra preset at 47 FPS is marginal, and the minimum FPS for Medium is 69, which is still above the 60 FPS threshold for most users. For 1440p, Medium is the sweet spot, offering a 19 FPS improvement over High while maintaining acceptable graphics.
At 3840x2160, none of the presets achieve a consistently smooth 60 FPS. The Low preset averages 55 FPS, which is close but not quite there, and the Medium preset at 45 FPS is likely to feel sluggish in action scenes. The High preset at 35 FPS and Ultra at 26 FPS are not recommended for general play. For 4K, the Low preset is the only viable option, and even then, users should expect frame dips below 60 FPS in heavy scenes. The data shows that the Medium preset has a minimum of 38 FPS at 4K, which could cause noticeable stutter, so Low is the pragmatic choice for resolution-hungry users.
How This Combo Ranks
The AMD Ryzen 7 9850X3D and NVIDIA GeForce RTX 2060 SUPER combination ranks 2066 out of 2944 tested combos in Palworld, placing it in the 70th percentile of the database (lower third). This rank reflects the GPU’s age and its inability to keep pace with modern titles at high resolutions, despite the CPU being a top-tier part. The combo’s position suggests that many other pairings, especially those with newer GPUs, will outperform it in this game, but the CPU’s strength ensures that the system is not leaving performance on the table at lower resolutions.
The rank is likely dragged down by the 4K results, where the RTX 2060 SUPER’s limitations are exposed. At 1080p, the combo’s performance is respectable, with the High preset hitting 95 FPS, which is above the average for many mid-range systems. However, at 4K, the 35 FPS average at High is below what many other combos achieve, pulling the overall rank down. The delta between the CPU’s high percentile (92) and the GPU’s lower percentile (62) is stark, indicating that the GPU is the limiting factor in this pairing.
For users with this combo, the data suggests that the system is best suited for 1080p or 1440p gaming, where the CPU can fully feed the GPU. At 4K, the combo falls into the lower percentile of tested systems, and users would need to lower settings significantly to achieve playable frame rates. The rank of 2066 out of 2944 is a clear indicator that this is not a high-end 4K setup, but it is a capable 1080p machine.
FAQ
Q: What is the best resolution for this combo in Palworld?
A: The data shows that 1920x1080 yields the highest average FPS across all presets, with the Low setting reaching 152 FPS and High at 95 FPS. The 2560x1440 Medium preset at 81 FPS is also viable, while 3840x2160 fails to reach 60 FPS on any preset.
Q: How does the RTX 2060 SUPER compare to its nearest rivals?
A: The RTX 2060 SUPER’s average benchmark score is 18093, which is within 1.6% of the NVIDIA GeForce RTX 3060 Mobile (18159, delta -0.4%), AMD Radeon Pro 5700 (18189, delta -0.5%), AMD Radeon RX 460 (18373, delta -1.5%), and Intel Arc A770M (18383, delta -1.6%). These are statistically similar in raw performance.
Q: Is the CPU or GPU the bottleneck at 4K?
A: The data indicates the GPU is the bottleneck at 4K. The FPS drops from 152 at 1080p Low to 55 at 4K Low, a 64% reduction, while the CPU’s high benchmark scores suggest it is not limiting. The GPU’s 8 GB VRAM and 448.0 GB/s bandwidth are insufficient for 4K workloads.
Q: What settings should I use for 1440p gaming?
A: The Medium preset at 2560x1440 provides an average of 81 FPS with a minimum of 69 FPS, making it the best balance. The High preset at 62 FPS is also acceptable, but the Ultra preset at 47 FPS is below the 60 FPS threshold.
Q: How does this combo rank compared to all tested systems?
A: This combo ranks 2066 out of 2944 tested combos in Palworld, placing it in the lower third of the database. This rank reflects the GPU’s limitations at high resolutions, despite the CPU’s top-tier performance.
Q: Does the Medium preset provide stable frame pacing?
A: The Medium preset has recorded minimum and maximum FPS values. At 1080p, the range is 105 to 142 FPS; at 1440p, it is 69 to 93 FPS; and at 4K, it is 38 to 52 FPS. The spread widens at higher resolutions, indicating less stable pacing at 4K.
Measured FPS Breakdown
This section provides the complete measured FPS data for the AMD Ryzen 7 9850X3D and NVIDIA GeForce RTX 2060 SUPER in Palworld, organized by resolution and settings preset.
1920x1080:
- Low: Average 152 FPS
- Medium: Average 123 FPS, Minimum 105 FPS, Maximum 142 FPS
- High: Average 95 FPS
- Ultra: Average 72 FPS
2560x1440:
- Low: Average 100 FPS
- Medium: Average 81 FPS, Minimum 69 FPS, Maximum 93 FPS
- High: Average 62 FPS
- Ultra: Average 47 FPS
3840x2160:
- Low: Average 55 FPS
- Medium: Average 45 FPS, Minimum 38 FPS, Maximum 52 FPS
- High: Average 35 FPS
- Ultra: Average 26 FPS
The pattern is consistent: each resolution step up halves the frame rate roughly, and each settings step up at a fixed resolution reduces FPS by a similar margin. The Medium preset is the only one with full min/max data, showing that frame variability increases significantly from 1080p to 4K, with the spread growing from 37 FPS at 1080p to 14 FPS at 4K. This suggests that while the average FPS drops, the consistency also degrades, making 4K play particularly challenging for this GPU.
Hardware Specifications
AMD Ryzen 7 9850X3D
NVIDIA GeForce RTX 2060 SUPER
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 7 9850X3D + NVIDIA GeForce RTX 2060 SUPER in Palworld
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 55.0 |
| 3840x2160 | Medium | 45.0 |
| 3840x2160 | High | 35.0 |
| 3840x2160 | Ultra | 26.0 |
| 2560x1440 | Low | 100.0 |
| 2560x1440 | Medium | 81.0 |
| 2560x1440 | High | 62.0 |
| 2560x1440 | Ultra | 47.0 |
| 1920x1080 | Low | 152.0 |
| 1920x1080 | Medium | 123.0 |
| 1920x1080 | High | 95.0 |
| 1920x1080 | Ultra | 72.0 |
Palworld with Ryzen 7 9850X3D + Other GPUs
See how Palworld performs with the same CPU but different graphics cards.
Palworld with RTX 2060 SUPER + Other CPUs
See how Palworld performs with the same GPU but different processors.
Other Games with Ryzen 7 9850X3D + RTX 2060 SUPER
Explore FPS benchmarks for other games using this same hardware combination.